Special! - C5 & C6 Brake Ducts - $50
10-29-2008, 03:19 PM
#1
Former Vendor
Thread Starter
Member Since: Mar 2007
Location: Highland IN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Special! - C5 & C6 Brake Ducts - $50
Special! - C5 & C6 Brake Ducts - $50
I guess we will call this our trick or treat special.
Get the easiest to install cooling ducts for your Corvette at the lowest price we have ever offered them.
Only $50 for our spindle duct kit.
That’s $25 (over 30%) off our retail price.
We are limiting this offer to ten kits only. Once we have ten orders that’s it, it’s over…. So get your order in early.
For $50 you get the ducts pictured below, fasteners and instructions.
As an added bonus we will offer street hose to those interested for an additional $25, and race hose for an additional $50. Street hose is great for the occasional track car and is rated to 250 deg. F, race hose is for the dedicated track car and is rated to 650 deg. F.
To see the kit installed on a car visit our web page at:
http://www.quantummotorsports.com/C5...vette_Kits.htm
Please note:
Base C6 cars require the Z06 inlets.
All C5 cars require Doug Rippie Motorsport inlets.
To place your order call us toll free at: 1.888.422.9685 and press 1 for sales.
When placing the order please say that you want part number 07035.3DK Corvette Forum special. If you want the hose please specify “add street hose” or “add race hose”.
We accept all major credit cards.
Shipping charges vary based on location, typically shipping to the continental US runs between $10-$15 depending on location. Shipping is via UPS ground. Expedited shipping is available at an additional cost if requested.
These are in stock and ready to ship.
Thanks,
Jon
I guess we will call this our trick or treat special.
Get the easiest to install cooling ducts for your Corvette at the lowest price we have ever offered them.
Only $50 for our spindle duct kit.
That’s $25 (over 30%) off our retail price.
We are limiting this offer to ten kits only. Once we have ten orders that’s it, it’s over…. So get your order in early.
For $50 you get the ducts pictured below, fasteners and instructions.
As an added bonus we will offer street hose to those interested for an additional $25, and race hose for an additional $50. Street hose is great for the occasional track car and is rated to 250 deg. F, race hose is for the dedicated track car and is rated to 650 deg. F.
To see the kit installed on a car visit our web page at:
http://www.quantummotorsports.com/C5...vette_Kits.htm
Please note:
Base C6 cars require the Z06 inlets.
All C5 cars require Doug Rippie Motorsport inlets.
To place your order call us toll free at: 1.888.422.9685 and press 1 for sales.
When placing the order please say that you want part number 07035.3DK Corvette Forum special. If you want the hose please specify “add street hose” or “add race hose”.
We accept all major credit cards.
Shipping charges vary based on location, typically shipping to the continental US runs between $10-$15 depending on location. Shipping is via UPS ground. Expedited shipping is available at an additional cost if requested.
These are in stock and ready to ship.
Thanks,
Jon
10-29-2008, 04:30 PM
#5
Le Mans Master
Any idea if these will work on a C4 with the C5 brakes?
10-29-2008, 06:36 PM
#7
Race Director
10-30-2008, 01:51 PM
#8
Former Vendor
Thread Starter
Member Since: Mar 2007
Location: Highland IN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Only 2 left! Get your order in before they are gone.
Sorry these will not fit the C4 spindle. We plan to work on a C4 specific kit this winter.
Thanks,
Jon
Sorry these will not fit the C4 spindle. We plan to work on a C4 specific kit this winter.
Thanks,
Jon
10-30-2008, 02:30 PM
#9
Race Director
10-31-2008, 09:45 AM
#10
Le Mans Master
Let us know when these are available for the C4.
10-31-2008, 12:46 PM
#11
Burning Brakes
Just ordered the 2nd-to-last kit with 650-degree race hose (saved $55 on this combo deal - only $100 total before shipping!!).
It seems like a well-designed yet simple kit - just what I've been looking for.
THANKS for your time today Jon, and for the great offer.
Robert
.
It seems like a well-designed yet simple kit - just what I've been looking for.
THANKS for your time today Jon, and for the great offer.
Robert
.
Last edited by EvilBoffin; 11-02-2008 at 03:34 AM.
11-01-2008, 08:12 PM
#14
Former Vendor
Thread Starter
Member Since: Mar 2007
Location: Highland IN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
That's it. All 10 are sold. Thanks for the orders guys. We'll try to run another special sometime next month.
These will work with the DRM kits but they are 3" in diameter and the DRM kits are 3.5".
These will work with the DRM kits but they are 3" in diameter and the DRM kits are 3.5".
11-01-2008, 09:39 PM
#15
Pro
Member Since: Mar 2005
Location: Denver CO
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I got #10 when I ordered yesterday. Tomorrow I'll be running my last track event for 2008 so I won't be able to try'em out until Spring.
This kit appears to be just what I was looking for and was too good a deal to pass up. Thanks Quantum_Motorsports.
This kit appears to be just what I was looking for and was too good a deal to pass up. Thanks Quantum_Motorsports.
11-02-2008, 07:39 AM
#16
Burning Brakes
Same here, the kit will be a few days too late for this season but looking forward to putting them to use in Spring.
11-03-2008, 01:14 AM
#17
Burning Brakes
11-03-2008, 11:56 AM
#18
Safety Car
I'll be watching for a possible sale next month. I've modified and fought with my LGM ones too long already. Tired of them rubbing and what not. I'd like to try yours out.
11-07-2008, 11:04 PM
#19
Hey, I got my kit today with the "race" hoses. But, there were no stainless band clamps or tie wraps in the package. I guess they forgot to ship them. How about the rest of the 10 buyers on this group-buy. Did you get stainless steel band clamps and tie wraps in your shipment? The picture Jon showed, definitely showed the clamps and the enclosed parts list showed them as well.
11-09-2008, 08:13 PM
#20
Burning Brakes
Hey, I got my kit today with the "race" hoses. But, there were no stainless band clamps or tie wraps in the package. I guess they forgot to ship them. How about the rest of the 10 buyers on this group-buy. Did you get stainless steel band clamps and tie wraps in your shipment? The picture Jon showed, definitely showed the clamps and the enclosed parts list showed them as well.
I got the ties and band clamps in my box.
Installation looks easy enough....except I don't have any Torx sockets in my box to remove the top hub bolts...so its out to the the auto store.