Getting it ready for the track
11-16-2008, 11:16 PM
#1
Racer
Thread Starter
Getting it ready for the track
It's been a long last few days trying to get the Vette ready for the upcoming track track/auto-x.
Mods this round include CCW C14 wheels (18x10.5 and 18x13) with Hoosier R6's (295x18 and 345x18). God these wheels are sexy.
Further mods include Hardbar camber/stud kit, Penske 8300 coilovers and harness bar, Simpson Platinum 6-point seat belts, Traqmate Data Acquisition, HP Tuners and LM-1 Wideband. StopTech 2 piece front rotors and Hawk pads.
Camber settings are 2 degree front, 1.5 rear, 1/8' toe out front, 1/16" toe in rear.
[IMG]
Mods this round include CCW C14 wheels (18x10.5 and 18x13) with Hoosier R6's (295x18 and 345x18). God these wheels are sexy.
Further mods include Hardbar camber/stud kit, Penske 8300 coilovers and harness bar, Simpson Platinum 6-point seat belts, Traqmate Data Acquisition, HP Tuners and LM-1 Wideband. StopTech 2 piece front rotors and Hawk pads.
Camber settings are 2 degree front, 1.5 rear, 1/8' toe out front, 1/16" toe in rear.
[IMG]
Last edited by jkittleson; 11-16-2008 at 11:20 PM.
