Special! - New C5 & C6 Brake Ducts Only $50
01-07-2009, 03:42 PM
#1
Former Vendor
Thread Starter
Member Since: Mar 2007
Location: Highland IN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Special! - New C5 & C6 Brake Ducts Only $50
Back by popular demand! Our C5 & C6 Brake Duct Special Only $50
We intended to do this special around the holidays but vacations and a hectic schedule means this is now a New Year special.
This is your chance to get the easiest to install cooling ducts for your Corvette at the lowest price we have ever offered them.... again!
Only $50 for our spindle duct kit.
Thats $25 (over 30%) off our retail price.
We are limiting this offer to twenty kits only. Once we have twenty orders thats it, its over . These went VERY quickly last time so get your order in early.
For $50 you get the ducts pictured below, fasteners and instructions.
(Please note: Newer versions are not powdercoated)
As an added bonus we will offer street hose to those interested for an additional $25, and race hose for an additional $50. Street hose is great for the occasional track car and is rated to 250 deg. F, race hose is for the dedicated track car and is rated to 650 deg. F.
To see the kit installed on a car visit our web page at:
http://www.quantummotorsports.com/C5...vette_Kits.htm
Please note:
Base C6 cars require the Z06 inlets.
All C5 cars require Doug Rippie Motorsport inlets.
To place your order call us toll free at: 1.888.422.9685 and press 1 for sales.
When placing the order please say that you want part number 07035.3DK Corvette Forum special. If you want the hose please specify add street hose or add race hose.
We accept all major credit cards.
Shipping charges vary based on location, typically shipping to the continental US runs between $10-$15 depending on location. Shipping is via UPS ground. Expedited shipping is available at an additional cost if requested.
These are in stock and ready to ship.
Thanks,
Jon
We intended to do this special around the holidays but vacations and a hectic schedule means this is now a New Year special.
This is your chance to get the easiest to install cooling ducts for your Corvette at the lowest price we have ever offered them.... again!
Only $50 for our spindle duct kit.
Thats $25 (over 30%) off our retail price.
We are limiting this offer to twenty kits only. Once we have twenty orders thats it, its over . These went VERY quickly last time so get your order in early.
For $50 you get the ducts pictured below, fasteners and instructions.
(Please note: Newer versions are not powdercoated)
As an added bonus we will offer street hose to those interested for an additional $25, and race hose for an additional $50. Street hose is great for the occasional track car and is rated to 250 deg. F, race hose is for the dedicated track car and is rated to 650 deg. F.
To see the kit installed on a car visit our web page at:
http://www.quantummotorsports.com/C5...vette_Kits.htm
Please note:
Base C6 cars require the Z06 inlets.
All C5 cars require Doug Rippie Motorsport inlets.
To place your order call us toll free at: 1.888.422.9685 and press 1 for sales.
When placing the order please say that you want part number 07035.3DK Corvette Forum special. If you want the hose please specify add street hose or add race hose.
We accept all major credit cards.
Shipping charges vary based on location, typically shipping to the continental US runs between $10-$15 depending on location. Shipping is via UPS ground. Expedited shipping is available at an additional cost if requested.
These are in stock and ready to ship.
Thanks,
Jon
01-16-2009, 09:19 PM
#7
Le Mans Master
Guess you still don't have anything for the C4??????
02-28-2009, 03:35 PM
#11
Safety Car
02-28-2009, 04:45 PM
#12
Race Director
02-28-2009, 05:40 PM
#13
Former Vendor
Thread Starter
Member Since: Mar 2007
Location: Highland IN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
03-02-2009, 10:44 AM
#14
Burning Brakes
I ordered mine during the last special but just got around to installing them last weekend. Its a simple job, took about 7 minutes per side. Great product so far, and I'm looking to put them to use at VIR next weekend.
Quick tip, which I read on another post...use self tapping screws where the hose attaches to the plastic duct. The zip ties are ok, but the screws really cinch things down!
Great product, great price!
Quick tip, which I read on another post...use self tapping screws where the hose attaches to the plastic duct. The zip ties are ok, but the screws really cinch things down!
Great product, great price!
03-02-2009, 01:33 PM
#16
Melting Slicks
Member Since: Sep 2001
Location: Lancaster County PA
Posts: 3,420
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '06-'07-'08-'09-'10
03-02-2009, 02:58 PM
#17
Drifting
Great product. We have had one on track event that tore the left front of the car off and while the hose got ripped off the mount only suffered a little twist that I removed by hand.
Happy Camper
03-03-2009, 08:24 PM
#18
Former Vendor
Thread Starter
Member Since: Mar 2007
Location: Highland IN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Any chance there will be power coated ones again? I have a set from your 1st sale and would like to have a couple more sets of the power coated ones for future builds.
Great product. We have had one on track event that tore the left front of the car off and while the hose got ripped off the mount only suffered a little twist that I removed by hand.
Happy Camper
Great product. We have had one on track event that tore the left front of the car off and while the hose got ripped off the mount only suffered a little twist that I removed by hand.
Happy Camper
03-09-2009, 11:53 PM
#20
Drifting
