WTB: Racing Wheels
#1
WTB: Racing Wheels
I'm looking for a set of wheels for the purpose of autox and track events that are in good condition. Target sizes are 18 X 11 in the front and 18 x 13 in the rear. I'll consider different widths but I'm pretty set on the height.
Thanks in advanced,
~Jeremy K.
EDIT: Also. The car these wheels are intended for is a 2007 C6 Z06.
Thanks in advanced,
~Jeremy K.
EDIT: Also. The car these wheels are intended for is a 2007 C6 Z06.
Last edited by jk13; 01-10-2009 at 11:24 AM.
#2
Burning Brakes
Member Since: Apr 2006
Location: Scottsdale AZ
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of like new CCW Corsair C14 wheels off my C6 Z06 in hard anodized silver finish 18 x 11 fronts and 18 x 13 rears mounted with Michelin slicks with about an hour on the tires. Balanced, nitrogen filled, with sensors. Almost 5K new...........$3200 plus shipping. PM me if you are interested and I will send pics. I will be listing them here this weekend.
#4
Drifting
#5
Burning Brakes
#6
Racer
Member Since: Jul 2007
Location: Tenneforniaska.
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
Rears are 18x12 BS to rim lip is 9.25" w/ 335-30-18 RA1s
here are some pics
I also have a set of T1 size(at least that is what we ran) CCW classics with polished centers, the spacers to go with them and old goodyear slicks among other wheels. Look for them in here or the C5 parts for sale section in the next few days.
17x11 F&R backspace is 8.25"
#8
Racer
Member Since: Jul 2007
Location: Tenneforniaska.
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
Did T1 used to be 17x11? If not then I guess I measured wrong. I wasn't here when my boss ran T1 so I don't know. He just said they the old T1 wheels. So if T1 has always been 17x10 then that is what they are. I will double check tomorrow.
#9
Melting Slicks
You should post the car model. Just the size spec is not enough... C5 vs. C6 offsets are different... the CCW Classics don't clear the C6 Z06 brakes...
#10