New Plastic molded Complete C6 C6Z Brake ducts
03-02-2009, 02:28 PM
#1
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
New Plastic molded Complete C6 C6Z Brake ducts
Hi guys,
NO more modifying! now available custom molded full 3" ducts.
As some of you know, we have been modifying plastic ducts for the C6 and C6Z for some time now. We finally had the tooling completed and the new molded ducts are ready.
These are made for the full 3" hose and will mate right up to any 3" spindle duct. ANd we had 3" aluminum tube molded in to add strength at the hose connection.
Also, as you know, our 3" spindle ducts are a complete backing plate arrangement that keeps the air flow inside the rotor and out the cooling vanes.
We use only the best double lined silicone hose that won't break down. It is the ONLY hose that we use on our race cars.
Pricing for the plastic ducts shown is $199 per pair.
And our spindle ducts are a full 360 degrees to keep the air where it is supposed to be. the better the seal, the better the brake cooling.
Give us a call and we can answer any of your questions.
Thanks
Lou Gigliotti
NO more modifying! now available custom molded full 3" ducts.
As some of you know, we have been modifying plastic ducts for the C6 and C6Z for some time now. We finally had the tooling completed and the new molded ducts are ready.
These are made for the full 3" hose and will mate right up to any 3" spindle duct. ANd we had 3" aluminum tube molded in to add strength at the hose connection.
Also, as you know, our 3" spindle ducts are a complete backing plate arrangement that keeps the air flow inside the rotor and out the cooling vanes.
We use only the best double lined silicone hose that won't break down. It is the ONLY hose that we use on our race cars.
Pricing for the plastic ducts shown is $199 per pair.
And our spindle ducts are a full 360 degrees to keep the air where it is supposed to be. the better the seal, the better the brake cooling.
Give us a call and we can answer any of your questions.
Thanks
Lou Gigliotti
__________________
LG Pro LT Headers, MOST HP, MOST TORQUE
http://lgmotorsports.com/gallery/alb...no_compare.jpg
LGM http://www.LGMotorsports.com
Winner Daytona 250
22 WC Wins
"Most powerful Corvette headers on the planet"
LG Pro LT Headers, MOST HP, MOST TORQUE
http://lgmotorsports.com/gallery/alb...no_compare.jpg
LGM http://www.LGMotorsports.com
Winner Daytona 250
22 WC Wins
"Most powerful Corvette headers on the planet"
Last edited by LG Motorsports; 03-02-2009 at 02:54 PM.
06-09-2009, 09:41 PM
#5
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Good question.
BUt if you already are using a C6 duct, then these will work.
They were designed and built using the Z06 ducts as the base, so they should fit. (but we have never done this.
LG
BUt if you already are using a C6 duct, then these will work.
They were designed and built using the Z06 ducts as the base, so they should fit. (but we have never done this.
LG
