FS: Accusump w/ Pressure Valve, –AN Fittings, Adapter
#1
Pro
Thread Starter
FS: Accusump w/ Pressure Valve, –AN Fittings, Adapter
For sale is a new, never installed Accusump kit for your high lateral load road racing or acceleration drag car. This kit is very complete, with only some AN hose remaining to make it a bolt-on application.
The parts included below make the Accusump completely automatic; when the oil pressure falls below your set level, the accusump delivers oil to the system avoiding starvation and severe oil damage. (As you know, it is a must in a high lateral load car on R-rated tires or higher)
For general detail on the Accusump for those of you who are not familiar:
http://www.accusump.com/accusump_tech.html#whatis
The kit includes:
ACCUSUMP 3QT TANK (Canton Racing PN # 24-006)
ACCUSUMP EPC VALVE 20-25 PSI (Canton Racing PN # 24-271)
ACCUSUMP MOUNTING CLAMPS (Canton Racing PN #24-200)
Aeroquip -10 AN to ½ pipe male fitting
Earl’s AN -10 to 16mm male fitting
Aluminum (NOT SANDWICH) adapter for plumbing the Accusump (includes port for oil pressure sender)
(2x) Earl’s AN-10 to ½ pipe male fittings installed in above adapter
Genuine GM Part Gasket (GM PN #15203889) for above adapter
Total price new for the kit was $575 without shipping
I am looking for $425 shipped
Let me know, and thanks for looking! Paypal accepted, but please add 3% to cover fees. Certified check also accepted.
The parts included below make the Accusump completely automatic; when the oil pressure falls below your set level, the accusump delivers oil to the system avoiding starvation and severe oil damage. (As you know, it is a must in a high lateral load car on R-rated tires or higher)
For general detail on the Accusump for those of you who are not familiar:
http://www.accusump.com/accusump_tech.html#whatis
The kit includes:
ACCUSUMP 3QT TANK (Canton Racing PN # 24-006)
ACCUSUMP EPC VALVE 20-25 PSI (Canton Racing PN # 24-271)
ACCUSUMP MOUNTING CLAMPS (Canton Racing PN #24-200)
Aeroquip -10 AN to ½ pipe male fitting
Earl’s AN -10 to 16mm male fitting
Aluminum (NOT SANDWICH) adapter for plumbing the Accusump (includes port for oil pressure sender)
(2x) Earl’s AN-10 to ½ pipe male fittings installed in above adapter
Genuine GM Part Gasket (GM PN #15203889) for above adapter
Total price new for the kit was $575 without shipping
I am looking for $425 shipped
Let me know, and thanks for looking! Paypal accepted, but please add 3% to cover fees. Certified check also accepted.
Last edited by jhester; 11-16-2009 at 12:21 PM.
#2
Pro
Thread Starter
Based on a few PM's; if sizing and install are a concern, I would split the tank from the kit and sell them as follows:
Accusump 3QT Tank - $150 shipped
Balance of above kit - $280 shipped
I need to ask a touch more to help cover the seperate shipping between the two parts, but if you already have a tank or are looking to design a 2QT system, you can still use the remainder of this very complete kit.
Thanks for the interest guys.
Accusump 3QT Tank - $150 shipped
Balance of above kit - $280 shipped
I need to ask a touch more to help cover the seperate shipping between the two parts, but if you already have a tank or are looking to design a 2QT system, you can still use the remainder of this very complete kit.
Thanks for the interest guys.
Last edited by jhester; 11-16-2009 at 12:21 PM.