Stoptech Made in China - Not a Concern???
#1
Safety Car
Thread Starter
Stoptech Made in China - Not a Concern???
In researching for a BBK I found Stoptech products are made in China. I'm wondering why there are no negative comments on their products due to the country of origin.
If someone even mentions running wheels or any other component made in China the outrage and posts of comdemnation are fast and furious. Not sure why it's not an issue with Stoptech?
Rick
If someone even mentions running wheels or any other component made in China the outrage and posts of comdemnation are fast and furious. Not sure why it's not an issue with Stoptech?
Rick
#3
Burning Brakes
Just because a product is made in China doesn't mean it's automatically crap. Stoptech has proven over and over again that their products are quality.
The problem with repro wheels/rotors/etc. that are made in China is that they have all too often proven themselves to be of poor quality, and thus people have associated China with poor production. In the end, it's just a generalization.
The problem with repro wheels/rotors/etc. that are made in China is that they have all too often proven themselves to be of poor quality, and thus people have associated China with poor production. In the end, it's just a generalization.
#4
Drifting
Member Since: Sep 2002
Location: Suwanee,Ga
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Just because a product is made in China doesn't mean it's automatically crap. Stoptech has proven over and over again that their products are quality.
The problem with repro wheels/rotors/etc. that are made in China is that they have all too often proven themselves to be of poor quality, and thus people have associated China with poor production. In the end, it's just a generalization.
The problem with repro wheels/rotors/etc. that are made in China is that they have all too often proven themselves to be of poor quality, and thus people have associated China with poor production. In the end, it's just a generalization.
Buyer beware.
No, no it's not a generalization. It is a lot more of an evolving situation.
Read Kiplinger's, today. That will be an eye opener, or type in "Chinese Steel Quality" and see what is there.
I will be expecting to pay a lot more for my steel parts.
The real worry may be CAN we even get parts that are not questionable?
TJM
#5
Race Director
Member Since: May 1999
Location: Plymouth MI Formerly Milford, MA MI
Posts: 14,267
Likes: 0
Received 1 Like
on
1 Post
W. Detroit Events Coordinator
Cruise-In VI Veteran
Cruise-In VII Veteran
Cruise-In VII Autocross Champ
I believe Coleman is the only Made in the USA Brake rotor or those brands that buy from Coleman
That's second hand so I'm not sure how true that is.
That's second hand so I'm not sure how true that is.
#6
Team Owner
China The caliper in now made in China or just the rotor? Either way price rules in China not quality. They could not even make a bolt for structural steel building frames, you know like skyscrapers? They were found sub-standard after millions being sold and in buildings
They can't make toys, dog food, medicine and on and on. Caught cheating on all of them.
Last time I checked caliper from Stoptech was forged in Taiwan and machined here but we know that could change in a week due to profit motives. May be thet will be sold in Walmart soon. If you keep buying crap from Chine you would be able to buy anything made here.
They can't make toys, dog food, medicine and on and on. Caught cheating on all of them.
Last time I checked caliper from Stoptech was forged in Taiwan and machined here but we know that could change in a week due to profit motives. May be thet will be sold in Walmart soon. If you keep buying crap from Chine you would be able to buy anything made here.
Last edited by John Shiels; 08-31-2009 at 06:00 PM.
#8
Melting Slicks
Member Since: Sep 2003
Location: If you don't weigh in you don't wrestle Road America
Posts: 3,031
Likes: 0
Received 73 Likes
on
54 Posts
So far I have been very happy with all of the products that I have gotten from StopTech, trust me as soon as I see that the products are less than I have expected I will make it known.
I have been pleased with the rotors that I have gotten for the 14" kits and even the 13" rotors that we run on our T1/ST2 car. My sales rep at StopTech has assured me that they will always use quality metal in there rotors and that they repetally check the consistancy of there products.
I have been pleased with the rotors that I have gotten for the 14" kits and even the 13" rotors that we run on our T1/ST2 car. My sales rep at StopTech has assured me that they will always use quality metal in there rotors and that they repetally check the consistancy of there products.
#9
Intermediate
Member Since: Sep 2005
Location: Dallas Texas
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
From what I remember being told by there lead engineer ...
Caliper bodys are forged overseas.
Rotors are made in Italy
Seals are made in Germany or Sweden
All machining and assembly is done in house in California.....
Caliper bodys are forged overseas.
Rotors are made in Italy
Seals are made in Germany or Sweden
All machining and assembly is done in house in California.....
#10
Former Vendor
I got a bit crazy with my family hauler/ski car, Subaru Forester XT(modded to STI and well beyond level, only thing in the engine bay and drivetrain, subframes, etc......not replaced was the steel fuel and rear brake lines) STI brakes, Stoptech one piece rotors, LOTS of air ducted to them.
I cracked a rotor all the way into the hub on a typical very hot day at MMP. I called them the next day, they paid for overnight shipping because they wanted it asap to test and they sent new rotors right away. I was quite impressed with their seriousness about this, so much so I just went ahead and bought their complete STI 4 piston front BBK
Before I installed the brakes and 305 race tires I was going to run (moved up from 245's) I decided it was time to build a full out race car, parted the Forester out, now I have a bad **** race Vette I am building and ordered their 6/4 piston kit for it.
Rick
I cracked a rotor all the way into the hub on a typical very hot day at MMP. I called them the next day, they paid for overnight shipping because they wanted it asap to test and they sent new rotors right away. I was quite impressed with their seriousness about this, so much so I just went ahead and bought their complete STI 4 piston front BBK
Before I installed the brakes and 305 race tires I was going to run (moved up from 245's) I decided it was time to build a full out race car, parted the Forester out, now I have a bad **** race Vette I am building and ordered their 6/4 piston kit for it.
Rick
#11
Racer
I got a bit crazy with my family hauler/ski car, Subaru Forester XT(modded to STI and well beyond level, only thing in the engine bay and drivetrain, subframes, etc......not replaced was the steel fuel and rear brake lines) STI brakes, Stoptech one piece rotors, LOTS of air ducted to them.
I cracked a rotor all the way into the hub on a typical very hot day at MMP. I called them the next day, they paid for overnight shipping because they wanted it asap to test and they sent new rotors right away. I was quite impressed with their seriousness about this, so much so I just went ahead and bought their complete STI 4 piston front BBK
Before I installed the brakes and 305 race tires I was going to run (moved up from 245's) I decided it was time to build a full out race car, parted the Forester out, now I have a bad **** race Vette I am building and ordered their 6/4 piston kit for it.
Rick
I cracked a rotor all the way into the hub on a typical very hot day at MMP. I called them the next day, they paid for overnight shipping because they wanted it asap to test and they sent new rotors right away. I was quite impressed with their seriousness about this, so much so I just went ahead and bought their complete STI 4 piston front BBK
Before I installed the brakes and 305 race tires I was going to run (moved up from 245's) I decided it was time to build a full out race car, parted the Forester out, now I have a bad **** race Vette I am building and ordered their 6/4 piston kit for it.
Rick
#12
Former Vendor
I got them from
http://worldoneperformance.com/index.php
and a bit of a break on them, great service really
Rick
http://worldoneperformance.com/index.php
and a bit of a break on them, great service really
Rick