New Coilovers - Sneak Peek
#1
Premium Supporting Vendor
Thread Starter
New Coilovers - Sneak Peek
New QA1 Coilovers
These will be available after SEMA (just after the beginning of Nov). We will know pricing at that time as well. Nothing further is really being discussed until after the show.
Features
Aluminum body shock
Single and Double Adjustable
Spring will be replaced by Hypercoil Springs
Inverted Rear Shocks
Each Shock is 100% Dyno Tested and Serialized
These will be available after SEMA (just after the beginning of Nov). We will know pricing at that time as well. Nothing further is really being discussed until after the show.
Features
Aluminum body shock
Single and Double Adjustable
Spring will be replaced by Hypercoil Springs
Inverted Rear Shocks
Each Shock is 100% Dyno Tested and Serialized
#3
Premium Supporting Vendor
Thread Starter
#4
Paul,this is bryan holland,have u done anything on the 87 c4 kit from the pics and measurements i sent u.
Still interested in workin with u.
My email is holland42679@optonline.net
Thanks!!
Still interested in workin with u.
My email is holland42679@optonline.net
Thanks!!
#5
Premium Supporting Vendor
Thread Starter
Paul,this is bryan holland,have u done anything on the 87 c4 kit from the pics and measurements i sent u.
Still interested in workin with u.
My email is holland42679@optonline.net
Thanks!!
Still interested in workin with u.
My email is holland42679@optonline.net
Thanks!!
I'll have Paul get back to you when he gets back from Miller Motorsports. He's there for the NASA event with the CTSV we've been working with. He'll be back on Tuesday. Here is a pic of a mock up we did. Frame is out of and 86 but the lower a-arm is an 88. From what I heard him say, I think we are a go on the 85-87 cars.
Dan
Last edited by Van Steel; 09-10-2009 at 12:27 PM.
#7
Premium Supporting Vendor
Thread Starter
We didn't have an 87 style arm here at he time. I got one in when we were at Carlisle 2 weeks ago. When he gets back, we'll install it and see what we have but it should be the same t-bar on the bottom. I know it's hard to tell from the pic but this is the upper mount we use. Also the fronts are inverted. I also included the rear lower mount that Gary from Hardbar designed and we made.
Front Upper Mount
Rear Mount
Full Kit w/out the Inverted Fronts