OBD-II Question
10-06-2011, 11:41 PM
#1
Burning Brakes
Thread Starter
OBD-II Question
I installed a track data-logger with a OBD-II connection in my C6Z06 and would like to monitor my oil pressure and oil temps from the ECU. In order to read them, I have to load the sensor hex address and an equation into the logger. Any ideas?
Note: I also posted this over in the C6 "Tech" section.
Jim
Note: I also posted this over in the C6 "Tech" section.
Jim
Last edited by Corvee; 10-07-2011 at 01:04 AM.
