WTB Replacement Hoses for Quantum Cooling Kit
#1
Drifting
Thread Starter
WTB Replacement Hoses for Quantum Cooling Kit
I need two replacement hoses for the Quantum Cooling Kit for my C6ZO6. For whatever reasons, Quantum/Lambert is not returning e-mails or phone calls and are not answering the phones. Web site is up but I don't see where I can place an order for just the high temp hoses.
Can anyone recommend a suitable replacement? I'm running out of time.
Jim
Can anyone recommend a suitable replacement? I'm running out of time.
Jim
#2
Pro
I've ordered some from here a few years ago, Aircraft Spruce:
http://www.aircraftspruce.com/menus/ap/ducting.html
Think I went for the SCEET hose. I'm not sure if they have good prices or not.
http://www.aircraftspruce.com/menus/ap/ducting.html
Think I went for the SCEET hose. I'm not sure if they have good prices or not.
#3
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,084
Received 8,926 Likes
on
5,332 Posts
I need two replacement hoses for the Quantum Cooling Kit for my C6ZO6. For whatever reasons, Quantum/Lambert is not returning e-mails or phone calls and are not answering the phones. Web site is up but I don't see where I can place an order for just the high temp hoses.
Can anyone recommend a suitable replacement? I'm running out of time.
Jim
Can anyone recommend a suitable replacement? I'm running out of time.
Jim
Bill
#5
Le Mans Master
I've ordered some from here a few years ago, Aircraft Spruce:
http://www.aircraftspruce.com/menus/ap/ducting.html
Think I went for the SCEET hose. I'm not sure if they have good prices or not.
http://www.aircraftspruce.com/menus/ap/ducting.html
Think I went for the SCEET hose. I'm not sure if they have good prices or not.
#6
Drifting
Thread Starter
Thanks,
Jim
#7
Le Mans Master
I'm sorry. I didn't realize you were talking C6Z. I used 3.5" on my C5Z with the DRM duct and Quantum spindle duct. I'm not sure about the C6.
#8
Drifting
Thread Starter
Thanks for your input!
Jim
#9
Team Owner
spruce sells it by the foot and their prices are good. Get the better hose from spruce. 4' should be good I THINK IS IS ON a C5.
#10
Instructor
Member Since: Feb 2008
Location: montreal quebec
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Just measured mine (C6-z) and it's 3 inches. It came from "Racers Wholesale". Free shipping for orders over $100 and my experience with them has been really good.
If I recall correctly, about 65 bucks for a 12 ft. length of the orangey hi-temp silicone stuff. You only need max. 4 ft for both sides so 12 feet is gonna last awhile.
If I recall correctly, about 65 bucks for a 12 ft. length of the orangey hi-temp silicone stuff. You only need max. 4 ft for both sides so 12 feet is gonna last awhile.
#12
Drifting
Thread Starter
The SCEET hose from Spruce is a little too stiff for use with the Quantum cooling kit on the C6Z. I've got three wire ties on each side holding the hose to the UCA and it still wants to rub. The problem is the angle of the inlet for the Quantum backing plate. If that angle were a little closer to 90* it would be better.
The hose that came with the Quantum Cooling Kit was much more flexible and was not an issue.
Jim
The hose that came with the Quantum Cooling Kit was much more flexible and was not an issue.
Jim