C5 and C3 3d models
#1
Intermediate
Thread Starter
Member Since: Feb 2006
Location: New Hope PA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
C5 and C3 3d models
Does anyone have a decent 3d model of a c5 (z06 preferably) and/or a c3? A friend of mine and I would like to try out some splitter and wing ideas for my car and his using CFD.
I searched the forums and the internet a bit and came up with a free google sketch up document which looks ok. It is, however, a coupe and I'm not 100% on the accuracy of the model:
http://sketchup.google.com/3dwarehou...4c&prevstart=0
There's also a $120 model of a c5z:
http://www.creativecrash.com/marketp...orvette-c5-z06
This model looks very nice, but for $120 I might just try to make my own. Just wanted to see if anyone had any models they wouldn't mind sharing. We'd be happy to post some of the CFD results!
I searched the forums and the internet a bit and came up with a free google sketch up document which looks ok. It is, however, a coupe and I'm not 100% on the accuracy of the model:
http://sketchup.google.com/3dwarehou...4c&prevstart=0
There's also a $120 model of a c5z:
http://www.creativecrash.com/marketp...orvette-c5-z06
This model looks very nice, but for $120 I might just try to make my own. Just wanted to see if anyone had any models they wouldn't mind sharing. We'd be happy to post some of the CFD results!
#2
Burning Brakes
I found a decent model on the Google Sketchup library but was not successful in having it import into Solidworks or Unigraphics. My goal was the same as yours.
http://sketchup.google.com/3dwarehou...=t&btnG=Search
Edit: Ooops just saw you found the Sketchup model.
http://sketchup.google.com/3dwarehou...=t&btnG=Search
Edit: Ooops just saw you found the Sketchup model.
#3
Intermediate
Thread Starter
Member Since: Feb 2006
Location: New Hope PA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I found a decent model on the Google Sketchup library but was not successful in having it import into Solidworks or Unigraphics. My goal was the same as yours.
http://sketchup.google.com/3dwarehou...=t&btnG=Search
Edit: Ooops just saw you found the Sketchup model.
http://sketchup.google.com/3dwarehou...=t&btnG=Search
Edit: Ooops just saw you found the Sketchup model.
#4
Intermediate
Thread Starter
Member Since: Feb 2006
Location: New Hope PA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Reviving this from the dead. I talked to the artist who is selling the model on creative crash. He didn't think the model was accurate enough for CFD. Someone must have one somewhere, no?