PICS: Howe TA2 chassis modified by Bemco for V8SC, NASA, & SCCA
#1
Drifting
Thread Starter
PICS: Howe TA2 chassis modified by Bemco for V8SC, NASA, & SCCA
Took some pics today of the Howe TA2 type chassis that Woody at Bemco Fab has modified a bit for Jeff Burck's new Racer. The car gets the new Howe Mustang look body but with a forged & dry sumped LS3 for power.
* PFC calipers and rotors
* Jerico road race 4 speed
* Nine inch Ford Grand National Floater with Nascar chunk
* tranny and rear end coolers
* AP air jack sytem
* Penske 8100 series shocks
* Ford Motorsport type wing (302 S)
* Motec dash/data logger
* 32 gal ATL cell
* 3 link with Watts link rear suspension
* PFC calipers and rotors
* Jerico road race 4 speed
* Nine inch Ford Grand National Floater with Nascar chunk
* tranny and rear end coolers
* AP air jack sytem
* Penske 8100 series shocks
* Ford Motorsport type wing (302 S)
* Motec dash/data logger
* 32 gal ATL cell
* 3 link with Watts link rear suspension
Last edited by bosco022; 04-05-2013 at 03:48 PM.
#8
Burning Brakes
Beautiful race car Any chance of seeing a pic of the bracket mounting the Watts link on the 9" housing? FWIW I would enjoy pages of pics of this chassis
#9
Drifting
Thread Starter
I'll see if I have any shots of that. The tube frame '69 Vette that Woody is building me will have the same set up. It will be a month or two before we get to that though.
#10
Burning Brakes
great thanks. It looks like there is an adjustment for the pivot as well as the arms to adj the RC much like a track bar. There are tons of cheep late model chassis laying around. Squared up on weight and geometry with a switch to a Watts link it seems like they would make great track toys. A nice trans with a out of spec crate engine, a RR pan, Not nearly as nice as your stuff but more like a hand me down set up for us getto kids!
Last edited by Crepitus; 01-21-2015 at 05:22 PM.