autocross pics
#1
Team Owner
Thread Starter
Member Since: Mar 2001
Location: Boston, Dallas, Detroit, SoCal, back to Boston MA
Posts: 30,606
Received 239 Likes
on
167 Posts
autocross pics
Some pics of me auto crossing
http://www.nickcrovo.com/2013/0420_autox/index.php?sfpg=MzgzX2NvcnZldHRlLyoqYjJhM TRjODQ3ZjE4ZTlmMDE3N2U1YzVjZWRkNGNiY2M
seem to have more body roll despite stiffer springs
I'm wondering if I lowered it just enough to mess up the roll center
either that or the 1st of the dual rate springs isn't quite stiff enough
http://www.nickcrovo.com/2013/0420_autox/index.php?sfpg=MzgzX2NvcnZldHRlLyoqYjJhM TRjODQ3ZjE4ZTlmMDE3N2U1YzVjZWRkNGNiY2M
seem to have more body roll despite stiffer springs
I'm wondering if I lowered it just enough to mess up the roll center
either that or the 1st of the dual rate springs isn't quite stiff enough
#2
Safety Car
I put the Corvette Challenge springs in my '85. That helped a lot. Then I went to an adjustable sway bar in the rear. That also helped.
Here's my car at speed. What's interesting is that the Porsche behind me appears to have slightly more body roll than I have.
Richard Newton
Facebook
Here's my car at speed. What's interesting is that the Porsche behind me appears to have slightly more body roll than I have.
Richard Newton
Last edited by rfn026; 05-02-2013 at 05:05 PM. Reason: url, spelling
#4
Team Owner
Thread Starter
Member Since: Mar 2001
Location: Boston, Dallas, Detroit, SoCal, back to Boston MA
Posts: 30,606
Received 239 Likes
on
167 Posts
got some good advice over here:
https://www.corvetteforum.com/c4-tec...ross-pics.html
New springs vs old springs
Stance with the new springs.
Going to change it, just my 1st drive to get the suspension to settle.
https://www.corvetteforum.com/c4-tec...ross-pics.html
New springs vs old springs
Stance with the new springs.
Going to change it, just my 1st drive to get the suspension to settle.