2013 NASA ST2/TT2 National Championship car
#1
Drifting
Thread Starter
2013 NASA ST2/TT2 National Championship car
Moving on to a new project:
Car can run in following categories:
NASA - ST1, STR1, ST2, STR3, TT1, TT2
SCCA - GT2
NARRA - GT2, GT3
Miller outer loop times at Nationals:
2.01.0 - TT2
2.01.4 - ST2 Champ. race
This car can go under 2.00 in ST2 trim with some updates I will discuss with new owner.
FS: C5 Chevrolet Corvette
Chassis built by LG Motorsports
All carbon fiber body by ACP
Never been crashed or damaged
Car had two previous owners who never raced car (only HPDE stuff)
I bought the car and completely tore it apart and had JDP Motorsports
completely reassemble it with the following:
Pfadt Race Engineering suspension
(sphericals, coil overs, sway bars, mounts etc.)
Installed a new crate LS3 engine with: - approx 20 hrs as of Nationals
Aviad dry sump system
ARP rod bolts
Comp cams rocker arm trunion kit and push rods
ARH exhaust system - specially coated inside and out
RPM stage 4 trans with .85/.74, 5th and 6th gear ratio
RPM stage 4 diff with quaiffe LSD
trans and diff coolers with fans
Stoptech 355mm BB system
22 gal Fuel safe cell - new this season
Woodward collapsible steering wheel
SKF wheel bearings with ARP studs
Cobra carbon/kevlar seat
B & M shifter
Autometer carbon gauges
Griffin custom 3 1/2 in radiator (good to 800 HP)
large oil cooler and remote oil filter
CCW wheels
car setup sheets
Option #1 - $44,700
This also includes coaching for 2 sessions with data and video analysis
at Miller Motorsports track or via online at your home track or at your home track with all travel and associated expenses paid for by purchaser.
www.datamotorsports.com
Option #2 - $49,700
Includes everything in Option #1 plus the following:
Complete AiM MXL pista data acquisition system
ION HD wireless camera system (front and rear cameras)
Spare suspension parts (control arms, cradle, etc.)
Spare carbon fiber hood
Spare set of CCW wheels
approx. 12 tires (slicks and DOT) with approx 1-4 heat cycles
other misc. spare stuff
Car will be at JDP Motorsports next week to be completely gone through to make sure, as much as you can on a race car, that car is race ready.
lots of photos at headonphotos.net
click on NASA Nationals
click on group D and group H
car #240
http://s1145.photobucket.com/user/co...how/race%20car
Car can run in following categories:
NASA - ST1, STR1, ST2, STR3, TT1, TT2
SCCA - GT2
NARRA - GT2, GT3
Miller outer loop times at Nationals:
2.01.0 - TT2
2.01.4 - ST2 Champ. race
This car can go under 2.00 in ST2 trim with some updates I will discuss with new owner.
FS: C5 Chevrolet Corvette
Chassis built by LG Motorsports
All carbon fiber body by ACP
Never been crashed or damaged
Car had two previous owners who never raced car (only HPDE stuff)
I bought the car and completely tore it apart and had JDP Motorsports
completely reassemble it with the following:
Pfadt Race Engineering suspension
(sphericals, coil overs, sway bars, mounts etc.)
Installed a new crate LS3 engine with: - approx 20 hrs as of Nationals
Aviad dry sump system
ARP rod bolts
Comp cams rocker arm trunion kit and push rods
ARH exhaust system - specially coated inside and out
RPM stage 4 trans with .85/.74, 5th and 6th gear ratio
RPM stage 4 diff with quaiffe LSD
trans and diff coolers with fans
Stoptech 355mm BB system
22 gal Fuel safe cell - new this season
Woodward collapsible steering wheel
SKF wheel bearings with ARP studs
Cobra carbon/kevlar seat
B & M shifter
Autometer carbon gauges
Griffin custom 3 1/2 in radiator (good to 800 HP)
large oil cooler and remote oil filter
CCW wheels
car setup sheets
Option #1 - $44,700
This also includes coaching for 2 sessions with data and video analysis
at Miller Motorsports track or via online at your home track or at your home track with all travel and associated expenses paid for by purchaser.
www.datamotorsports.com
Option #2 - $49,700
Includes everything in Option #1 plus the following:
Complete AiM MXL pista data acquisition system
ION HD wireless camera system (front and rear cameras)
Spare suspension parts (control arms, cradle, etc.)
Spare carbon fiber hood
Spare set of CCW wheels
approx. 12 tires (slicks and DOT) with approx 1-4 heat cycles
other misc. spare stuff
Car will be at JDP Motorsports next week to be completely gone through to make sure, as much as you can on a race car, that car is race ready.
lots of photos at headonphotos.net
click on NASA Nationals
click on group D and group H
car #240
http://s1145.photobucket.com/user/co...how/race%20car
Last edited by J.R.; 09-20-2013 at 04:19 PM. Reason: additional photo link