Mercedes F1 V6 Simulation Video
#1
Le Mans Master
Thread Starter
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
Mercedes F1 V6 Simulation Video
Why Ferrari and Mercedes will benefit most from F1's engine regulations in 2014
Many believe new rules will close the gap between Red Bull and rest of the Formula One field
By: Matthew Walthert, Bleacher Report on November 8, 2013
After four straight years of Formula One dominance from Sebastian Vettel and Red Bull Racing, fans are ready for a change. The hope is that new engine regulations for the 2014 season will provide it.
While a shake-up at the top of the standings is not guaranteed, major changes to engine regulations in the past have usually benefitted one specific group of constructors: those who build their own engines (or who are the sole customer of an engine company). Red Bull does not. It is reliant on Renault, who will also be powering Toro Rosso and Caterham (Lotus is using Renault engines this year but have yet to announce a supplier for 2014).
The only two constructors who will build their own engines next year are Ferrari and Mercedes. This gives them several advantages, including the ability to develop the engines and chassis side-by-side to complement each other. Meanwhile, engine customers must take what their supplier gives them.
To see the case for why Red Bull's era of dominance could be coming to an end, please see the article at Bleacher Report.
#3
Racer
I would expect Renault to work very closely with RBR to develop their new engine package. If I'm an engine supplier, I want as many teams using my powerplant as possible to defray development costs and/or increase margin per engine. If the fastest team(s) are using the engine that I developed maybe more teams will switch to it, further decreasing unit cost.
#6
Le Mans Master
Thread Starter
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
Although a record run I cannot be impressed besting Bill Elliot's 1987 single lap record of 201.364 mph in a Thunderbird? I would guess a current day sprint cup car without restrictor plate may come close or eclipse the 222.971 mph and current day IRL car would most certainly best it. No matter, the direction of top tier pro racing takes another step towards forced induction with smaller displacement and in some classes supplemental electric power.
----------------------------------------------
Colin Braun's lap of 222.971 mph on Wednesday at Daytona International Speedway in a Michael Shank Racing-owned Ford-Riley powered by a 3.5-liter, V-6 Ford EcoBoost race engine has had Ford Racing buzzing this week.
The lap topped the 26-old speed record of 210.364 mph set by Bill Elliot during qualifying for the 1987 Daytona 500. Restrictor plates designed to keep speeds down have been on NASCAR Sprint Cup cars at Daytona since 1998.
Braun also set a speed record for 10 miles from a standing start (210.018 mph average), and 10 kilometers from a standing start (202.438 mph average). Tiimes from Wednesday's special session are subject to Federation Internationale de l'Automobile (FIA) sanctioning.
To celebrate Braun's accomplishment, Ford Racing released a video highlighting the day's events and including interviews with several of the people who helped to make the record happen.
----------------------------------------------
Colin Braun's lap of 222.971 mph on Wednesday at Daytona International Speedway in a Michael Shank Racing-owned Ford-Riley powered by a 3.5-liter, V-6 Ford EcoBoost race engine has had Ford Racing buzzing this week.
The lap topped the 26-old speed record of 210.364 mph set by Bill Elliot during qualifying for the 1987 Daytona 500. Restrictor plates designed to keep speeds down have been on NASCAR Sprint Cup cars at Daytona since 1998.
Braun also set a speed record for 10 miles from a standing start (210.018 mph average), and 10 kilometers from a standing start (202.438 mph average). Tiimes from Wednesday's special session are subject to Federation Internationale de l'Automobile (FIA) sanctioning.
To celebrate Braun's accomplishment, Ford Racing released a video highlighting the day's events and including interviews with several of the people who helped to make the record happen.
#7
Racer
The (lack of) safety gear in his '87 thunderchicken is nothing short of amazing. The average road race club race car has 10x the amount of safety gear. It's a wonder somebody didn't get killed every weekend back in those days going 200+ mph in those cars.
#8
Le Mans Master
Thread Starter
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
Elliot went 210 at Daytona and 212 at Talladega, and if you come to Dawsonville GA and look at that car in the museum and had to choose between the 222 mph DP car and the 210 mph stock car, you'd jump in the DP in a second
The (lack of) safety gear in his '87 thunderchicken is nothing short of amazing. The average road race club race car has 10x the amount of safety gear. It's a wonder somebody didn't get killed every weekend back in those days going 200+ mph in those cars.
The (lack of) safety gear in his '87 thunderchicken is nothing short of amazing. The average road race club race car has 10x the amount of safety gear. It's a wonder somebody didn't get killed every weekend back in those days going 200+ mph in those cars.
Above video stops short. Jason Blonde breaks the record here filmed outside the fence with camera phone...sorry
Last edited by NemesisC5; 11-11-2013 at 08:51 PM.
#9
Although a record run I cannot be impressed besting Bill Elliot's 1987 single lap record of 201.364 mph in a Thunderbird? I would guess a current day sprint cup car without restrictor plate may come close or eclipse the 222.971 mph and current day IRL car would most certainly best it. No matter, the direction of top tier pro racing takes another step towards forced induction with smaller displacement and in some classes supplemental electric power.
----------------------------------------------
Colin Braun's lap of 222.971 mph on Wednesday at Daytona International Speedway in a Michael Shank Racing-owned Ford-Riley powered by a 3.5-liter, V-6 Ford EcoBoost race engine has had Ford Racing buzzing this week.
The lap topped the 26-old speed record of 210.364 mph set by Bill Elliot during qualifying for the 1987 Daytona 500. Restrictor plates designed to keep speeds down have been on NASCAR Sprint Cup cars at Daytona since 1998.
Braun also set a speed record for 10 miles from a standing start (210.018 mph average), and 10 kilometers from a standing start (202.438 mph average). Tiimes from Wednesday's special session are subject to Federation Internationale de l'Automobile (FIA) sanctioning.
To celebrate Braun's accomplishment, Ford Racing released a video highlighting the day's events and including interviews with several of the people who helped to make the record happen.
----------------------------------------------
Colin Braun's lap of 222.971 mph on Wednesday at Daytona International Speedway in a Michael Shank Racing-owned Ford-Riley powered by a 3.5-liter, V-6 Ford EcoBoost race engine has had Ford Racing buzzing this week.
The lap topped the 26-old speed record of 210.364 mph set by Bill Elliot during qualifying for the 1987 Daytona 500. Restrictor plates designed to keep speeds down have been on NASCAR Sprint Cup cars at Daytona since 1998.
Braun also set a speed record for 10 miles from a standing start (210.018 mph average), and 10 kilometers from a standing start (202.438 mph average). Tiimes from Wednesday's special session are subject to Federation Internationale de l'Automobile (FIA) sanctioning.
To celebrate Braun's accomplishment, Ford Racing released a video highlighting the day's events and including interviews with several of the people who helped to make the record happen.
#11
Racer
I agree and I'm not saying anything negative about Elliot or the ***** it took to drive the thunderchicken. Merely stating that 222 mph around a 2.5 mile banked oval is not hard to beat to in a modern day IRL car or an LMP1 car. Here's a clip from special event at Bristol to see who/what could turn the quickest lap...if you have a few minutes check it out
IIRC Rusty Wallace hit 228 mph at the end of the straight about 10 yrs ago testing a non plate car at 'dega. I seem to remember them saying with more practice/gearing they could have hit 235, which would have made for a very fast average lap even with some lift (if needed) on the banking.
They averaged 240+ in Champ car in the heyday on the big ovals
#12
Le Mans Master
Thread Starter
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
With the Nurburgring used as a yardstick for factory performance cars along with mile and half mile events around the country for "serious enthusiasts" I would be surprised if we don't see other car manufacturers showcase new technology as Ford did on some of our nations fastest tracks.
I saw another documentary a few years ago (still on my DVR) when Ford first introduced the EcoBoost truck motor. They took an EcoBoost engine and ran it in dyno cell for equivalent of roughly 100k miles, put same engine in F-150 truck body and towed two Nascar "Cup Cars" on a twin trailor for 24 hours straight, only stopping for fuel and to check tire pressures, then put same engine in 4 wheel drive F-150 body and towed large logs at a logging camp, then installed the same motor in a Baja 1000 truck body (stock engine class) and won their class. After all the punishment Ford took that same engine and disassembled at SEMA to check wear and tear on the internals in their booth. The engine held up great with little to normal wear. I could likely Google or Youtube and find a short story of the event if I was not so tired this evening...oh well that was too easy to find
I saw another documentary a few years ago (still on my DVR) when Ford first introduced the EcoBoost truck motor. They took an EcoBoost engine and ran it in dyno cell for equivalent of roughly 100k miles, put same engine in F-150 truck body and towed two Nascar "Cup Cars" on a twin trailor for 24 hours straight, only stopping for fuel and to check tire pressures, then put same engine in 4 wheel drive F-150 body and towed large logs at a logging camp, then installed the same motor in a Baja 1000 truck body (stock engine class) and won their class. After all the punishment Ford took that same engine and disassembled at SEMA to check wear and tear on the internals in their booth. The engine held up great with little to normal wear. I could likely Google or Youtube and find a short story of the event if I was not so tired this evening...oh well that was too easy to find
Last edited by NemesisC5; 11-12-2013 at 09:13 PM.
#13
That's not a great deal of power for a race motor! the I4 duratec engines have pushed put over 800bhp when they have been used in Ford sponsored cars (Ford Fiesta that did pikes peak last year i think). Would think the 3.5 ltr should be able to kick out more than 750bhp.
#14
They also stated that the first goal was to build an engine to last the distance. After that you refine the unit after more testing (under race pace) and make things lighter and faster.
I can see te teams facing the same issues this time around. Through in the Energy recovery systems and its going to be an interesting first few races. Don't get me wrong these are not going to be the engines like the 1980's turbo era though. lol
#15
Safety Car
I don't think the Grand-Am ecoboost is stressed too much. Power outputs are pretty neutered and I think there is a focus on reliability as well. I'm sure it could throw up some bigger numbers if the class rules were more like the GTP rules in the 80s (where output would be in the 8-900hp range, or more). The ecoboost in the rally cross cars supposedly puts out 650hp/650tq, but those things don't run for longer than 10 minutes at a time or so.
#16
Le Mans Master
Thread Starter
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
I don't think the Grand-Am ecoboost is stressed too much. Power outputs are pretty neutered and I think there is a focus on reliability as well. I'm sure it could throw up some bigger numbers if the class rules were more like the GTP rules in the 80s (where output would be in the 8-900hp range, or more).........
#17
Racer
I don't think the Grand-Am ecoboost is stressed too much. Power outputs are pretty neutered and I think there is a focus on reliability as well. I'm sure it could throw up some bigger numbers if the class rules were more like the GTP rules in the 80s (where output would be in the 8-900hp range, or more). The ecoboost in the rally cross cars supposedly puts out 650hp/650tq, but those things don't run for longer than 10 minutes at a time or so.