New 9" high Race Ramps Trailer Ramp with flap cut out
#1
Former Vendor
Thread Starter
Member Since: Oct 2010
Location: Philadelphia PA
Posts: 1,250
Likes: 0
Received 53 Likes
on
45 Posts
New 9" high Race Ramps Trailer Ramp with flap cut out
The RR-TR-7-FLP trailer ramp has been available since 2012. This ramp model is 74" long and has a 5.5 degree incline. The "7" in the part numbers indicates the height of the trailer door at the seam between the door and flap.
A couple of months ago Race Ramps introduced a 9" high version of the ramp. The RR-TR-9-FLP has the same 5.5 degree incline and the RR-TR-7-FLP, but, it is 95" long. The 2" higher RR-TR-9-FLP ramp accommodates trailers with a higher deck height.
The 9" high ramp is a two-piece design and ships in two cartons.
http://www.reverselogic.us/shop.html...00&id=29459762
A couple of months ago Race Ramps introduced a 9" high version of the ramp. The RR-TR-9-FLP has the same 5.5 degree incline and the RR-TR-7-FLP, but, it is 95" long. The 2" higher RR-TR-9-FLP ramp accommodates trailers with a higher deck height.
The 9" high ramp is a two-piece design and ships in two cartons.
http://www.reverselogic.us/shop.html...00&id=29459762