mnmthoele

I was wondering what people have used for a replacement performance brake master cylinder. This is for a street/track day car, so I do not need an all out race setup. I believe my MC is going bad so I want to open up my options before I replace it. Thanks for any input.

rithsleeper

Im in kind of the same boat.... would also be interested in input.

Bad Karma

I figured when it was time for me to do it I'd go with Doug Rippie; if I remember right it's a slightly bigger master and they add a proportioning valve to it.

0Randy@DRM

Sorry guys that I'm late to the party.

We sell a larger bore master cylinder that uses a prop valve to reduce the rear brakes. This setup works great if you have a different calipers on the car and requires more volume.

For stock caliper cars, I always suggest using a stock GM master for replacement. I have a great deal on C6z masters in the C6 parts for sale section of the forum.

I also have a C5 stock master that I will sell at my cost. Ordered it a week ago and now the customer wants to switch over to a Tilton setup. So I'm getting it back.

Randy

mnmthoele

Randy
What is the price for the c5 stock master? I may be interested.
Mike