LG Motorsports Drop/ Drag Spindles-Free Shipping!
12-17-2011, 04:07 PM
#1
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
LG Motorsports Drop/ Drag Spindles-Free Shipping!
LG Motorsports Drop/ Drag Spindles-Free Shipping!
A must have for lowered cars!
-0% Financing available for up to 1 year!
-If your looking for a set of drop spindles for your Vette.. now's the time to get one! If your interested in a set please feel free to contact me at 408/898-4632, via email @ Mikem@TPSMotorsports.com, or PM
A must have for lowered cars! Our new drop spindle will effectively lower your car slightly more than 1" from stock while leaving the control arms in the factory locations and within GM's designed suspension curve. We have been using these on all of our World Challenge Corvette's since 2004, and are currently being used on the new GrandAm GT #28 LG Motorsports Corvette
Our drop spindles include one full set of four uprights, assembled with mono ball upper mount, pivot pin, and nut. These are 100% direct replacements for your factory unit, with no modifications required to your factory control arms, bearings, tie rods, or caliper mounts.
LG Motorsports Drag Spindles
These billet spindles are taken directly from our road race drop spindles, but by design allow the use of a 15" wheel for those that need a true drag tire, while retaining the OEM parking brake assembly.
*All forged aluminum construction
*Bolt on install, no modifications needed to your Corvette
*Retains use of OEM parking brake
*Retains use of GM calipers
*Allows use of 15" drag wheels
*C6Z51 and C6Z06 must purchase optional brake kit for clearance
*Optional 1000HP axle and bearing kit.
Who else wants set of these beautiful spindles?
Free Shipping and 0% financing available for ALL LG Motorsports Products!
A must have for lowered cars!
-0% Financing available for up to 1 year!
-If your looking for a set of drop spindles for your Vette.. now's the time to get one! If your interested in a set please feel free to contact me at 408/898-4632, via email @ Mikem@TPSMotorsports.com, or PM
A must have for lowered cars! Our new drop spindle will effectively lower your car slightly more than 1" from stock while leaving the control arms in the factory locations and within GM's designed suspension curve. We have been using these on all of our World Challenge Corvette's since 2004, and are currently being used on the new GrandAm GT #28 LG Motorsports Corvette
Our drop spindles include one full set of four uprights, assembled with mono ball upper mount, pivot pin, and nut. These are 100% direct replacements for your factory unit, with no modifications required to your factory control arms, bearings, tie rods, or caliper mounts.
LG Motorsports Drag Spindles
These billet spindles are taken directly from our road race drop spindles, but by design allow the use of a 15" wheel for those that need a true drag tire, while retaining the OEM parking brake assembly.
*All forged aluminum construction
*Bolt on install, no modifications needed to your Corvette
*Retains use of OEM parking brake
*Retains use of GM calipers
*Allows use of 15" drag wheels
*C6Z51 and C6Z06 must purchase optional brake kit for clearance
*Optional 1000HP axle and bearing kit.
Who else wants set of these beautiful spindles?
Free Shipping and 0% financing available for ALL LG Motorsports Products!
__________________
TPSMotorsports.com
Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Kooks, Whipple, Magnalow, Corsa, Borla. LG Motorsports, Procharger, Billy Boat Exhaust, AWE Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Last edited by TPSMak; 01-15-2015 at 07:18 PM.
05-27-2012, 07:40 PM
#6
Le Mans Master
09-06-2012, 02:16 PM
#11
Former Vendor
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
Remember our drag spindles are on the worlds quickest IRS C6Z06!
The Drops are used on our World Challenge, and Grand Am race cars along with some of the fastest weekend racers around the world!
The Drops are used on our World Challenge, and Grand Am race cars along with some of the fastest weekend racers around the world!
03-27-2014, 10:08 AM
#15
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
So who wants to pick up an set of LG Drop or Drag Spindles?
0% interest for up to 1 year available & free shipping on all LG Products!!
0% interest for up to 1 year available & free shipping on all LG Products!!
04-09-2014, 09:33 PM
#20
Melting Slicks
