17" Drag pack tire choices for M6 GS (675rwhp A&A kit)
#41
Le Mans Master
Member Since: Nov 2005
Location: Kendall Park NJ
Posts: 6,964
Likes: 0
Received 335 Likes
on
247 Posts
Naa Gary they are 25" or so on my 9.5" c5 z rims as well. I mentioned this to Rick and that's one thing I like about these tires, they are short for a little extra gear compared to the much taller 26" (supposedly) 17" bias ply. I don't have the measurements handy but I think those were like 28" on my C5 standard fronts (8.5").
#42
Tech Contributor
#43
Burning Brakes
Tires
I am looking at getting a set of these on my 17 x 11's;
M&H Racemaster Radial Drag Race Tire 325/45-17
Asymmetrical Tread Pattern
No
Directional
Yes
DOT-Approved
Yes
Maximum Recommended Wheel Width
11.00 in.
Minimum Recommended Wheel Width
11.00 in.
Quantity
Pair
Section Width
12.10 in.
Sidewall Style
Blackwall
Tire Construction
Radial
Tire Diameter
28.00 in.
Tire Size
325/45-17
Tread Width
10.30 in.
Tube Required
No
Wheel Diameter
17 in.
M&H Racemaster Radial Drag Race Tire 325/45-17
Asymmetrical Tread Pattern
No
Directional
Yes
DOT-Approved
Yes
Maximum Recommended Wheel Width
11.00 in.
Minimum Recommended Wheel Width
11.00 in.
Quantity
Pair
Section Width
12.10 in.
Sidewall Style
Blackwall
Tire Construction
Radial
Tire Diameter
28.00 in.
Tire Size
325/45-17
Tread Width
10.30 in.
Tube Required
No
Wheel Diameter
17 in.
#45
#48
Le Mans Master
If you want some help then pm me your setup and I'll get you pointed in the right direction.