--RELEASE-- LG Motorsports C7 15" Drag Conversion kit
#1
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
--RELEASE-- LG Motorsports C7 15" Drag Conversion kit
Hey guys and girls,
It has been a long time coming on this project but we are now ready for final release on the LG Motorsports 15" wheel drag conversion kit for the C7 Corvette!
Unlike the C5 and C6 Corvette's, the C7 presented its own challenges in doing this conversion. This kit is more than just a spindle change like what was found on the prior generations of Corvette. The C7 required a new one piece custom rotor and re-designed lower control arm to allow the smaller diameter wheel and tire package. LG Motorsports has designed and engineered this COMPLETE KIT to allow a full bolt on conversion ready for any number of 15" wheels on the market today.
Prototype kits tested by Vengeance Racing have already propelled the car deep in the 10 second range. With C7Z06's now putting down over 1000rwhp, the traction of a 15" wheel and tire package is going to be a much needed item in dropping E.T.'s at the track!
Kit Includes:
MSRP $4949.95
Currently all pieces are being assembled here at LG by hand, with an expected completion of 2-3 kits per week. There is a list of sold orders now, so call your sales person TODAY and get yours reserved NOW!
FIRST KITS ARE BEING SHIPPED THIS WEEK!!!!!!!
It has been a long time coming on this project but we are now ready for final release on the LG Motorsports 15" wheel drag conversion kit for the C7 Corvette!
Unlike the C5 and C6 Corvette's, the C7 presented its own challenges in doing this conversion. This kit is more than just a spindle change like what was found on the prior generations of Corvette. The C7 required a new one piece custom rotor and re-designed lower control arm to allow the smaller diameter wheel and tire package. LG Motorsports has designed and engineered this COMPLETE KIT to allow a full bolt on conversion ready for any number of 15" wheels on the market today.
Prototype kits tested by Vengeance Racing have already propelled the car deep in the 10 second range. With C7Z06's now putting down over 1000rwhp, the traction of a 15" wheel and tire package is going to be a much needed item in dropping E.T.'s at the track!
Kit Includes:
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
MSRP $4949.95
Currently all pieces are being assembled here at LG by hand, with an expected completion of 2-3 kits per week. There is a list of sold orders now, so call your sales person TODAY and get yours reserved NOW!
FIRST KITS ARE BEING SHIPPED THIS WEEK!!!!!!!
#2
AMP Racing
Member Since: Aug 2006
Location: Washington TWP NJ
Posts: 10,446
Received 466 Likes
on
352 Posts
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
Very cool. I figured it was only a matter of time before you guys brought something like this to market.
Will the new lower control arm allow for an inner beadlock wheel?
Will the new lower control arm allow for an inner beadlock wheel?
#5
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
First batch of kits are already spoken for with most shipped at this point. Next batch should be ready to go middle of next week. They are going quicker than we can build them.
#6
AMP Racing
Member Since: Aug 2006
Location: Washington TWP NJ
Posts: 10,446
Received 466 Likes
on
352 Posts
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
So, I was thinking...
How about making some lower control arms for a C5/C6 that allow for an inner bead lock?
How about making some lower control arms for a C5/C6 that allow for an inner bead lock?
#7
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
I guess I need to ask him again if he is running locks on the inside of his car or not. I thought he was with the Billet Specialty wheels but he is using stock control arms on his C6Z and our spindles.
#8
AMP Racing
Member Since: Aug 2006
Location: Washington TWP NJ
Posts: 10,446
Received 466 Likes
on
352 Posts
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
I haven't spoken to him lately,but, I'm pretty confident he's running an inner bead lock wheel. I'd like to know what back spacing his wheels are if he's usong a stock lca.
I have your spindles. I haven't tried to fit a bead lock wheel on my car. I guess I should at least try it to see.
I have your spindles. I haven't tried to fit a bead lock wheel on my car. I guess I should at least try it to see.
#9
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
I haven't spoken to him lately,but, I'm pretty confident he's running an inner bead lock wheel. I'd like to know what back spacing his wheels are if he's usong a stock lca.
I have your spindles. I haven't tried to fit a bead lock wheel on my car. I guess I should at least try it to see.
I have your spindles. I haven't tried to fit a bead lock wheel on my car. I guess I should at least try it to see.
They are at an event right now but I bet if you emailed him you would get something early next week.
#11
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
For those that have been asking about what comes in the kit.
Calipers come loaded with pads ready to go on. Ball joints are installed in the arms and spindles both.
Kits are supplied with two lowering bolts as well for those using shorter tires.
Kit shown is ready to ship!
Calipers come loaded with pads ready to go on. Ball joints are installed in the arms and spindles both.
Kits are supplied with two lowering bolts as well for those using shorter tires.
Kit shown is ready to ship!
#12
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
Another customer C7 getting the full LG drag conversion with Weld wheels and drag tires from our good friend and dealer, Mark Carlyle!
#14
AMP Racing
Member Since: Aug 2006
Location: Washington TWP NJ
Posts: 10,446
Received 466 Likes
on
352 Posts
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
Anthony, are you guys going to be at the Chevy High Performance Nationals - NMCA event in Atlanta next month?
#19
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
The next batch of kits are being assembled as we speak now. We hope to have all back orders together and shipping in the coming days. If you are wanting to get a kit for the 2017 season, I would get an order in soon so we can make sure to have parts on hand!!
For those that currently have an order in with us directly or through a dealer we are working to try and deliver as many kits as we can prior to Christmas!
For those that currently have an order in with us directly or through a dealer we are working to try and deliver as many kits as we can prior to Christmas!
#20
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
We should be completing all back ordered kits and shipping by Friday. If you are interested in a package for the 2017 season, get your order in now because we only have a limited number of parts left from this run to make more kits and it will be a few weeks before more arrive.