Engine Mods Outrageous Builds, High-Horsepower Modifications, strokers, and big cams for the Corvette

Barry Grant 6 Shooter

Thread Tools
 
Search this Thread
 
Old 08-09-2005, 06:29 AM
  #1  
Graemeinvette
Drifting
Support Corvetteforum!
Thread Starter
 
Graemeinvette's Avatar
 
Member Since: Jul 2002
Location: Edinburgh
Posts: 1,254
Likes: 0
Received 1 Like on 1 Post

Default Barry Grant 6 Shooter

Anybody fitted the Barry Grant '6 Shooter' triple twin carb/manifold setup? Its a lot of $, but looks the dogs whatsits, so is it a good set up? Is it worth going for?
Old 08-09-2005, 09:54 AM
  #2  
Crazyhorse
Safety Car
 
Crazyhorse's Avatar
 
Member Since: Apr 2001
Location: Middleboro/Boston MA
Posts: 3,574
Likes: 0
Received 0 Likes on 0 Posts

Default

$2400.00 for 15hp and some pretty carbs ? Nope.
Old 08-10-2005, 06:28 AM
  #3  
SmokedTires
Le Mans Master
 
SmokedTires's Avatar
 
Member Since: Apr 2000
Location: B'Ville NY
Posts: 7,562
Received 9 Likes on 9 Posts
Cruise-In III Veteran
St. Jude Donor '05

Default

lvrpool32 has them on his 396 sbc in the C3 section
Old 08-10-2005, 07:09 AM
  #4  
Graemeinvette
Drifting
Support Corvetteforum!
Thread Starter
 
Graemeinvette's Avatar
 
Member Since: Jul 2002
Location: Edinburgh
Posts: 1,254
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by SmokedTires
lvrpool32 has them on his 396 sbc in the C3 section
Thanks I have posted a note for him there.
Old 08-11-2005, 03:31 AM
  #5  
groovyjay
Le Mans Master
 
groovyjay's Avatar
 
Member Since: Nov 2000
Posts: 8,175
Received 169 Likes on 91 Posts

Default

http://chevyhiperformance.com/techarticles/0510ch_spot/
Old 08-11-2005, 03:45 AM
  #6  
Graemeinvette
Drifting
Support Corvetteforum!
Thread Starter
 
Graemeinvette's Avatar
 
Member Since: Jul 2002
Location: Edinburgh
Posts: 1,254
Likes: 0
Received 1 Like on 1 Post

Default

Thanks Groovyjay, this plus Lvrpool32's comments have made it a must have.

Graeme
Old 08-11-2005, 08:50 PM
  #7  
oldace84
Race Director
 
oldace84's Avatar
 
Member Since: Aug 2002
Location: tucson AZ
Posts: 13,356
Likes: 0
Received 0 Likes on 0 Posts
St. Jude Donor '04 & '05

Default

EFI The best. No carb's.
at all.
Old 08-11-2005, 08:54 PM
  #8  
cv67
Team Owner
 
cv67's Avatar
 
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes on 2,602 Posts
St. Jude Donor '05

Default

Nce looking setup!
Old 08-11-2005, 10:13 PM
  #9  
KyRP2NITe Corvette
Racer
 
KyRP2NITe Corvette's Avatar
 
Member Since: Apr 2003
Location: Suffolk VA
Posts: 286
Likes: 0
Received 2 Likes on 2 Posts
Default

IF you gotta run carbs it is a pimp'n setup.
Old 08-12-2005, 02:36 AM
  #10  
groovyjay
Le Mans Master
 
groovyjay's Avatar
 
Member Since: Nov 2000
Posts: 8,175
Received 169 Likes on 91 Posts

Default

Originally Posted by Graemeinvette
Thanks Groovyjay, this plus Lvrpool32's comments have made it a must have.

Graeme

No worries mate. If you are looking into getting that set up, I'd advise you to look at few EFI set up's too. There's few companies making throttlebodies for the 3x2 set up. The BG's carb set up is pretty high priced, so EFI might be an option for you...
Old 08-12-2005, 02:42 AM
  #11  
Graemeinvette
Drifting
Support Corvetteforum!
Thread Starter
 
Graemeinvette's Avatar
 
Member Since: Jul 2002
Location: Edinburgh
Posts: 1,254
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by KyRP2NITe Corvette
IF you gotta run carbs it is a pimp'n setup.
Absolutely! I did look at EFI but decided I wanted to stay with carbs and the six shooter has all the bling as well!
Old 08-12-2005, 09:56 PM
  #12  
HWoods
Drifting
 
HWoods's Avatar
 
Member Since: Aug 2000
Location: Houston, TX
Posts: 1,316
Likes: 0
Received 0 Likes on 0 Posts

Default

way overpriced IMO
Old 08-14-2005, 02:55 AM
  #13  
Classicvette63
Burning Brakes
 
Classicvette63's Avatar
 
Member Since: Aug 2001
Location: York Pa.
Posts: 857
Likes: 0
Received 0 Likes on 0 Posts

Default

Dang, and I thought the edelbrock 3x2 setup was expensive.

When I was rebuilding my '63 I thought a Hillborn injection would be nice. When I saw the price I decided living in my car was not an option.
Old 08-16-2005, 09:57 PM
  #14  
MotorHead
Race Director
 
MotorHead's Avatar
 
Member Since: Apr 2000
Location: Who says "Nothing is impossible" ? I've been doing nothing for years.
Posts: 17,569
Received 156 Likes on 126 Posts

Default

Originally Posted by Crazyhorse
$2400.00 for 15hp and some pretty carbs ? Nope.
Who says your gonna get 15HP from that setup, you might lose 15 HP ?

I would put them on, just because they are plain
Old 08-17-2005, 05:50 AM
  #15  
Graemeinvette
Drifting
Support Corvetteforum!
Thread Starter
 
Graemeinvette's Avatar
 
Member Since: Jul 2002
Location: Edinburgh
Posts: 1,254
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by MotorHead
Who says your gonna get 15HP from that setup, you might lose 15 HP ? :
Barry Grant showed 15hp gain and 13ft/lb on a mildly tuned small block replacing a Speed Demon 650cfm on an airgap, with the 6 Shooter.

Thanks for your comment cuisinartvette, its appreciated.
Old 08-19-2005, 02:37 PM
  #16  
norvalwilhelm
Race Director
 
norvalwilhelm's Avatar
 
Member Since: Nov 2000
Location: Waterloo ontario Canada
Posts: 11,872
Likes: 0
Received 9 Likes on 9 Posts

Default

Am I reading it wrong or did the 750 demon carb and dual plain intake outmuscle it by 16 horse? 415 to 399???
Old 09-07-2005, 11:53 PM
  #17  
korvetkeith
Melting Slicks
 
korvetkeith's Avatar
 
Member Since: Jul 2000
Location: Peoria IL
Posts: 2,102
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by norvalwilhelm
Am I reading it wrong or did the 750 demon carb and dual plain intake outmuscle it by 16 horse? 415 to 399???
Your not, it makes less power than an optimized single 4 barrel setup.

Get notified of new replies

To Barry Grant 6 Shooter




Quick Reply: Barry Grant 6 Shooter



All times are GMT -4. The time now is 06:01 AM.