409hp @ 6k rpm and 427lb ft of torque @ 3500rpm? - CorvetteForum - Chevrolet Corvette Forum Discussion

Go Back   >
Log In 
Register FAQ Search Today's Posts Mark Forums Read Vendor Directory

Engine Mods
Outrageous Builds, High-Horsepower Modifications, strokers, and big cams for the Corvette Sponsored by
CARiD

409hp @ 6k rpm and 427lb ft of torque @ 3500rpm?

Reply
 
 
 
Thread Tools Search this Thread
Old 09-09-2012, 09:51 PM   #1
SPC Meyer
CF Member
Thread Starter
 
SPC Meyer's Avatar
 
Member Since: Jun 2010
Location: Ft.Bragg North Carolina
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
Default 409hp @ 6k rpm and 427lb ft of torque @ 3500rpm?

I was thinking of tryin to build an engine using these specs,
this is out of Ryans engine combination and bible site.
(Combos 93 to 100)

http://www.ryanscarpage.50megs.com/combos13.html

Displacement: 350 cu. in.

Carburetor: Holley 750 double-pumper

Heads: GM L31 Vortecs, pocket-ported, with 1.94/1.50 in. valves

Intake: Edelbrock Performer RPM Vortec

Camshaft: Comp Cams Xtreme Energy 268 hydraulic, with
0.478/0.480 in. of lift and 224/230° of duration @ 0.050 in. of lift.

Exhaust: Hedman 1 5/8 in. headers

Distributor: HEI

Comp. Ratio: 9.4:1

MAX HP: 409 @ 6000
MAX Torque: 427 @ 3500

The vette I have is a 78 with a 3.08 rear and freshly rebuilt TH350 with original stall torque converter.

My question is, how would an engine act that reaches its peak torque way before max HP is reached. I chose it cause it looks cheap to build "non roller cam". What would be a good stall speed and rear end gear. Thanks

Last edited by SPC Meyer; 09-09-2012 at 10:20 PM.
SPC Meyer is offline   Reply With Quote
Old 09-12-2012, 10:19 AM   #2
cuisinartvette
CF Senior Member
St. Jude Donor '05
 
Member Since: Oct 2004
Location: Valencia Ca.
Posts: 57,841
Thanked 207 Times in 195 Posts
Default

24-2600 stall

3.50-3.70 gear
700r would be really fun with the lower first gear, would pull OD just fine on the hwy

Wouldnt sweat where torque/hp peaks are on this one
With an AFR 180 head that combo would really tear it up on the street!!
cuisinartvette is offline   Reply With Quote
Old 09-13-2012, 10:31 PM   #3
danno85
CF Senior Member
 
Member Since: Nov 2001
Location: Austin TX
Posts: 1,189
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by SPC Meyer View Post
My question is, how would an engine act that reaches its peak torque way before max HP is reached.
That makes it way fun to drive...
danno85 is offline   Reply With Quote
Go Back   CorvetteForum - Chevrolet Corvette Forum Discussion >
Reload this Page
  • 409hp @ 6k rpm and 427lb ft of torque @ 3500rpm?
  •  
     
    Reply

    Related Topics
    Thread Thread Starter Forum Replies Last Post
    409hp @ 6k rpm and 427lb ft of torque @ 3500rpm? SPC Meyer C3 Tech/Performance 16 09-10-2012 07:49 PM
    355 mouse vortec powerhouse! long THREAD!!!! SpE3dF0x C3 Tech/Performance 15 08-15-2008 09:49 PM
    Considering upgrading my zz4's heads and cam CDaniel525 Engine Mods 4 03-03-2007 12:17 AM
    Considering upgrading my zz4's heads and cam CDaniel525 C3 Tech/Performance 13 03-01-2007 03:00 AM
    What do you think of this zz4?? 506HP!! CDaniel525 Engine Mods 9 12-12-2001 09:03 PM


    Thread Tools Search this Thread
    Search this Thread:

    Click for Advanced Search

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off

    Forum Jump


    All times are GMT -4. The time now is 02:50 PM.