My '10 SS "Project Cammedmaro"
10-28-2009, 05:37 PM
#1
Intermediate
Thread Starter
Member Since: Jul 2006
Location: Miami FL
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
My '10 SS "Project Cammedmaro"
Building it as we speak,
Livernois L92 Heads
Stage 1B cam
Kooks LT's 1-7/8x3"
MBRP Cat-back
AFE Intake
Tuned by Torq
Pfadt Sway bars
Eibach Springs
etc etc
More pics and numbers to come!
Livernois L92 Heads
Stage 1B cam
Kooks LT's 1-7/8x3"
MBRP Cat-back
AFE Intake
Tuned by Torq
Pfadt Sway bars
Eibach Springs
etc etc
More pics and numbers to come!
10-28-2009, 10:34 PM
#3
Burning Brakes
Seen that ride on the other site. Baaad Looking!
Let us know the power it makes, and how she runs when ready!
Better yet, bring it out to the CHALLENGE SERIES at PBIR. (Mostly Street Cars). Check it out:
http://www.racepbir.com/calendarprin...YuaHRtbA%3D%3D
Let us know the power it makes, and how she runs when ready!
Better yet, bring it out to the CHALLENGE SERIES at PBIR. (Mostly Street Cars). Check it out:
http://www.racepbir.com/calendarprin...YuaHRtbA%3D%3D
10-30-2009, 07:40 AM
#9
Intermediate
Thread Starter
Member Since: Jul 2006
Location: Miami FL
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
11-03-2009, 09:31 AM
#11
Intermediate
Thread Starter
Member Since: Jul 2006
Location: Miami FL
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Finally my heads and cam have arrived!
Here are some specs on the CNC heads and cam, I can't wait to hear this baby fire up!
Cam:
Here are some specs on the CNC heads and cam, I can't wait to hear this baby fire up!
- 5 axis CNC machined
- Intake Flow Rate 360 CFM
- Exhaust Flow Rate 245 CFM (275 CFM w/ 1 3/4" Pipe)
- Manley Stainless 2.160 Intake Valves
- Manley Stainless 1.590 Exhaust Valves
- Super 7 locks
- Livernois dual coil valve springs good to ~ .690 lift
- Livernois titanium retainers
Cam:
- Intake duration: 224 @ .050
- Exhaust duration: 236 @ .050
- Intake lift: .581"
- Exhaust lift: .590"
- LSA: 115
