TPS C5 & C6 Powder Coated & 100% Rebuilt Calipers & brackets-FREE SHIPPING!
11-11-2010, 05:21 PM
#1
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
TPS C5 & C6 Powder Coated & 100% Rebuilt Calipers & brackets-FREE SHIPPING!
C5 & C6 Powder Coated Rebuilt Calipers-from $339.99 FREE SHIPPING!
CALIPERS ARE 100% REBUILT WITH NEW BOOTS AND SEALS!
-Brakes are a safety issue and we take YOUR safety very seriously. We DO NOT USE ANY OLD/ USED BOOTS or SEAL.
Our powder coating process has 2 coats of powder coating applied to each caliper and bracket which hides alot of the casting imperfections on the caliper. We can also powder coat your own calipers. If you are interested in purchasing a set of TPS Powder Coated Calipers OR having your calipers powder coated please contact us. A $400 core charge will be applied when order is placed and your old calipers must be sent back to us to receive your core charge back. Cores must be in good condition without damage.
Caliper brackets are powder coated so the pads can "float" freely in the bracket
-When caliper brackets are painted or powdercoated you MUST make sure the area where the pads sit are free of excessive powder coating. If there is excessive powder coat it will cause your brakes to bind.
Please take a look at our caliper bracket on the right as it is free of excess powder coating in areas where the pads sits... allowing it to "Freely Float" and NOT BIND.
Why not get a complete brake kit from TPS?
Whether your looking for just......
Rotors from $219.99
*Our rotors are made by Centric, the makes of Stoptech Brakes, and the cooling vanes are directional
http://forums.corvetteforum.com/c5-p...free-ship.html
TPS Stage 2 Brake Upgrade kits which includes Stoptech or Hawk Brake Pads, Stainless Steel Brake lines, rotors, and Motul Brake Fluid for only $499 shipped to your door!
CALIPERS ARE 100% REBUILT WITH NEW BOOTS AND SEALS!
-Brakes are a safety issue and we take YOUR safety very seriously. We DO NOT USE ANY OLD/ USED BOOTS or SEAL.
Our powder coating process has 2 coats of powder coating applied to each caliper and bracket which hides alot of the casting imperfections on the caliper. We can also powder coat your own calipers. If you are interested in purchasing a set of TPS Powder Coated Calipers OR having your calipers powder coated please contact us. A $400 core charge will be applied when order is placed and your old calipers must be sent back to us to receive your core charge back. Cores must be in good condition without damage.
Caliper brackets are powder coated so the pads can "float" freely in the bracket
-When caliper brackets are painted or powdercoated you MUST make sure the area where the pads sit are free of excessive powder coating. If there is excessive powder coat it will cause your brakes to bind.
Please take a look at our caliper bracket on the right as it is free of excess powder coating in areas where the pads sits... allowing it to "Freely Float" and NOT BIND.
Why not get a complete brake kit from TPS?
Whether your looking for just......
Rotors from $219.99
*Our rotors are made by Centric, the makes of Stoptech Brakes, and the cooling vanes are directional
http://forums.corvetteforum.com/c5-p...free-ship.html
TPS Stage 2 Brake Upgrade kits which includes Stoptech or Hawk Brake Pads, Stainless Steel Brake lines, rotors, and Motul Brake Fluid for only $499 shipped to your door!
__________________
TPSMotorsports.com
Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Kooks, Whipple, Magnalow, Corsa, Borla. LG Motorsports, Procharger, Billy Boat Exhaust, AWE Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Last edited by TPSMak; 03-16-2016 at 05:05 PM.
11-11-2010, 05:47 PM
#2
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
We have the following Calipers & Brackets which are in stock and ready to ship out are listed below... no waiting right now.
C6 Black Z51-1 Set
C6 Black Base/ Standard-1 Set
C6 Red Base/ Standard-3 Sets
C5 Black Base/ Standard-1 Set
C5 Red Base/ Standard-1 Set
C6 Black Z51-1 Set
C6 Black Base/ Standard-1 Set
C6 Red Base/ Standard-3 Sets
C5 Black Base/ Standard-1 Set
C5 Red Base/ Standard-1 Set
11-12-2010, 09:45 AM
#3
Melting Slicks
Member Since: Apr 2007
Location: Willow Springs IL
Posts: 3,290
Likes: 0
Received 0 Likes
on
0 Posts
If I send you a C6 standard non Z51 set will you send me a C6 Z-51 set in exchange. I've been wanting to upgrade to Z-51 rotors and now would be a time to do it.
11-12-2010, 10:17 AM
#4
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
We can do it for you but there would be additional charges for the Z51 brackets. It would not be a straight swap. I will PM you a quote.
12-11-2010, 05:06 AM
#8
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
We have a C5 set ready to ship out and we do carry our own line of rotors available in Slotted, Cross Drilled/ Slotted, and dimpled slotted for only $239.99 delivered to your door. Please PM me your phone number and so I can go over some options with you.
01-18-2011, 10:29 AM
#16
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Who else would like a set? We have Red or Black ready to ship out immediately... this will reduce your down time for your calipers. C6 Z51 will be available by the end of the week.
03-05-2011, 03:10 AM
#18
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
We have these calipers in stock and ready to ship now...
Black C5 Calipers w/ Brackets (2 Sets)-$310 shipped to your door
Red C5 Calipers w/ Brackets (1 Set)-$310 shipped to your door
Candy Red C6 Z51 Calipers w/ Brackets (1 Set)-$400 shipped to your door
Red C6 Z51 Calipers w/ Brackets (1 Set)-$310 shipped to your door
Black C6 Calipers w/ Brakets (1 Set)-$310 shipped to your door
Black C6 Z51 Calipers w/ Brakets (1 Set)-$310 shipped to your door
Candy Red pictured below
Black C5 Calipers w/ Brackets (2 Sets)-$310 shipped to your door
Red C5 Calipers w/ Brackets (1 Set)-$310 shipped to your door
Candy Red C6 Z51 Calipers w/ Brackets (1 Set)-$400 shipped to your door
Red C6 Z51 Calipers w/ Brackets (1 Set)-$310 shipped to your door
Black C6 Calipers w/ Brakets (1 Set)-$310 shipped to your door
Black C6 Z51 Calipers w/ Brakets (1 Set)-$310 shipped to your door
Candy Red pictured below
04-24-2011, 06:00 AM
#19
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Here are some pictures of some Candy Blue calipers we just finished this week... pictures don't do them justice 
.. they have 3 layers of powder coating.
.. they have 3 layers of powder coating.
