Corvette Parts News! New C6 Section! 8/28/04
08-29-2004, 12:36 AM
#1
Melting Slicks
Thread Starter
Corvette Parts News! New C6 Section! 10/04/04
Hello! This is Bob, thanks for taking the time to read my weekly newsletter with information and special parts pricing for Corvette Forum members.
Be sure to check the important announcements section!
REMEMBER WE OFFER ANY GM PART AT GM WHOLESALE PRICES FOR ANY GM VEHICLE!!!
TECHNICAL BULLETIN & INFORMATION IS IN SECTION COUR HOURS ARE 7:30 TO 5:30 MOUNTAIN TIME MONDAY THRU FRIDAY 8:00 TO 12:00 MOUNTAIN TIME SATURDAY OUR PARTS HOTLINE IS 406-628-4121 or 406-628-4618
Bob is extension 108 and Tom is extension 107FAX # 406-628-2025
EMAIL:Parts: [email]parts@fichtnerchevrolet.com
NEW DIRECT ORDER SITE FOR PARTS SPECIALS GO HERE FOR POPULAR PARTS SPECIALS
http://www.corvetteforum.net/c5/ken...artspage1.shtml
ANY ORDERS OVER $100.00 IF YOU INCLUDE YOUR VIN #, WE WILL GIVE YOU AT NO CHARGE A COMPLETE WARRANTY HISTORY AND BUILD SHEET BREAKDOWN ON YOUR VEHICLE. THIS IS FOR ANY GM VEHICLE NOT JUST CORVETTE. GM HAS THIS ON FILE FOR MOST VEHICLES BACK TO ABOUT 1990. FOR ORDERS ON THE ABOVE WEB SITE INCLUDE YOUR VIN IN THE SHIPPING INFORMATION SECTION.
A: IMPORTANT ANNOUNCEMENTS
New email addresses!! Parts: [email]parts@fichtnerchevrolet.com
This site is completely secure, no need to worry about credit card #
NEW C6 SECTION!! I will also be starting a separate C6 post next week!
GM HAS REDUCED THE PRICE ON THE PERFORMANCE ROTORS AND CERAMIC BRAKE PADS BY OVER 70%
AC DELCO DURASTOP CERAMIC BRAKE PADS $118.13 FOR THE SET OF FRONTS AND REARS
AC DELCO PERFORMANCE DRILLED AND SLOTTED ROTORS$59.95 EA
CHECK OUT THE PROMO MODEL CLOSEOUT IN SECTION B!
GM CORVETTE ACCESSORIES WEB SITE
http://www.gmgoodwrench.com/accesso
HUMMER H2 PARTS NOW AVAILABLE AT WHOLESALE PRICES
WATCH FOR OUR WEEKLY SPECIALS ON SEPARATE POSTS ON THE FORUM
Due to the response to our specials on our web order site we will continue them !
WE NOW OFFER GIFT CARDS! THESE ARE AVAILABLE IN ANY DOLLAR INCREMENT UP TO $999 THESE ARE PURCHASEABLE WITH CHECK OR CASH. DUE TO THE PROGRAM RESTRICTIONS THEY CAN?T BE PURCHASED WITH A CREDIT CARD. IF YOU HAVE SOMEONE THAT IS HARD TO BUY FOR, BUT YOU KNOW THEY ALWAYS ARE AFTER PARTS FOR THEIR VEHICLES THIS IS AN OPTION. FOR FURTHER INFORMATION CALL BOB, TOM OR KEN AT 406-628-4618
TOP TIER DETERGENT GASOLINE
This is from August 2004 Tech Link
This information applies to all 2005 and prior General Motors passenger cars and trucks (US and Canada only)
Top Tier Detergent Gasoline, a new class of gasoline with enhanced detergency, will be appearing at retail stations of some fuel marketers. This gasoline meets new, voluntary deposit control standards developed by GM, BMW, Honda and Toyota.
The US EPA requires all gasoline sold in the US to contain a detergent additive. However, the requirement is minimal and in many cases is not sufficient to keep engines clean. A higher level of detergent is needed than what is required by the EPA. Top Tier Detergent Gasoline exceeds the detergent requirements imposed by the EPA.
The four corporations recognized the benefits to both the vehicle and the consumer. Also, joining together emphasized the low detergency is an issue of concern to several automotive companies. All vehicles will benefit from using Top Tier Detergent Gasoline, which will help keep engines cleaner than gasoline containing the lowest additive concentration set by the EPA. Clean engines help provide optimal fuel economy and performance, and reduced emissions. Those vehicles that have experienced deposit related problems would especially benefit from use of Top Tier Detergent Gasoline.
The Top Tier program, begun on May 3, 2004 is a voluntary program initiated by the four automotive companies. Some fuel marketers have already joined, although not all fuel marketers will offer Top Tier Detergent Gasoline. Once fuel marketers make public announcements, a list of all fuel marketers meeting Top Tier standards will be made available. For now, it will be necessary to look for the “Top Tier” designation at the gas pump.
C6 SECTION
AS SPECIAL PARTS COME AVAILABLE I WILL BE ADDING THEM HERE AS OF NOW ONLY SOME OF THE C6 ACCESSORIES ARE AVAILABLE, GM SAYS THE REST ARE COMING SOON!
ACCESSORIES
Rear Spoilers..available pre-painted in Precision Red, Silver, Orange, and Blue. They list for $175.00 and your cost is $150.00
Door Handles,.available in the same four colors..list $100.00 and cost is $80.00 a pair.
Brushed Aluminum Door Sill Plates..list $80.00 and cost is $65.00
Storange Pouch..single..list $115.00 and cost is $95.00
Rear license plate holder..available in above 4 colors plus black. List is $65.00 and cost is $55.00
Other accessories that GM says is coming soon:
Storage Pouch-set of 2
Transparent removable roof panel
Front license plate holder..available in all colors except black
Cargo organizer
Removable roof panel storage bag and bracket
18” & 19” cast aluminum 10-spoke wheels (available polished or with painted silver, gold, and gun metal finish)
Exhaust plate screen
Cockpit wind break
Body Colored Interior Trim Package
CD changer
Woven Mesh side cover inserts
Chrome door handles
Decklid liner with embroidered logo (convertibles only)
Manual shift **** & boot –color keyed to interior
Park brake handle & boot – color keyed to interior
Front end cover
C6 BULLETINS
Corvette Keyless Ignition
Taken from August, 2004 Tech Link
The 2005 Corvette keyless access system uses a coded transmitter fob. With the transmitter fob inside the passenger compartment, pressing the START button on the instrument panel starts the engine. The engine is turned OFF by briefly pressing he OFF/ACC button. TIP: In most respect, this system is identical to the one used on the Cadillac XLR. However, there are some differences in the keyless access system when the Corvette is equipped with a manual transmission.
The ignition is not designed to turn off on vehicles equipped with a manual transmission unless the transmission is in Reverse. This means the ignition state will be Key On, Engine Off if the transmission is not in Reverse when the OFF/ACC button is pressed.
This can affect some service procedures because the engine control module (ECM) remains awake in the Key On, Engine Off state.
TIP: When performing any service procedure calling for turning the ignition OFF on a manual transmission car, be sure to place the transmission in Reverse before pressing the OFF/ACC button.
After a reprogramming event or after performing a CKP System Variation Learn Procedure, it’s necessary to turn the ignition OFF for a period of tiem, to allow the date to be written to long term memory. If the transmission is not in Reverse, the data will never be written to long term memory because the ECM is waiting for the ignition state to be OFF.
If the engine is started or the ignition is turned back to RUN under the assumption that the ignition had been turned off after the procedure, the write is aborted and all of the learned information is lost.
In the case of an ECM reprogramming or replacement, it could appear that the ECM did not properly program. With a CKP learn, the ECM will not store the learned values, which may cause DTC”s to set.
Condition Button Press What Happens
engine off, ignition off press START ignition ON, engine starts
auto trans in park, press OFF/ACC engine OFF, ignition OFF,
engine running. RAP enabled for 20 mins.
auto trans in park,
enine Off, ignition OFF press OFF/ACC ACC enabled
manual trans in reverse,
engine running press OFF/ACC engine OFF, ignition OFF,
RAP enabled for 20 mins.
manual trans not in
reverse, engin running press OFF/ACC key on, engine off
either trans, engine off,
ignition off press OFF/ACC ACC enabled
either trans, engine off,
ingition off press OFF/ACC
for 5 seconds key on, engine off
C5 SECTION
UPF 44 FILTERS ARE STILL AVAILABLE FOR 6.95 EA IN QUANTITIES OF 6 OR MORE!
REGULAR PRICE IS 7.95 EA.
B: NEW PRODUCTS
PROMO MODEL SPECIALS ONLY A FEW LEFT OF EACH OF THESE MODELS!!
2001 Convertible-discounted to $29.00 with free shipping
white exterior with red interior
CLOSEOUT PRICE?$25.00 FREE SHIPPING
2001 Z06 Hardtop-discounted to $29.00 with free shipping
millennium yellow with black interior
CLOSEOUT PRICE?$25.00 FREE SHIPPING
1963 Corvette Split Window Coupe Combo- discounted to $50.00 with free shipping
In commemoration of this unique car Chevrolet authorized the release of a special promo package that includes: two 1:25 scale plastic promotional models pre-colored in Bronze and Black with highly detailed chassis and interiors
.CLOSEOUT PRICE?39.95 FREE SHIPPING
1963 Corvette Convertible and Split Window Coupe Combo
This is a new kit, the convertible is light blue with dark blue interior. The coupe is dark blue with oak interior. This is a limited edition collectors set certified by GM. We have them on special at 69.00 with free shipping.
CLOSEOUT PRICE? $47.95 FREE SHIPPING
2003 ZO6 Black with red interior
sale price..$29.95 plus $6.99 shipping
CLOSEOUT PRICE $22.95 FREE SHIPPING
2003 Coupe Electron Blue with black interiorsale price..$29.95 plus $6.99 shipping
CLOSEOUT PRICE $22.95 FREE SHIPPING
50TH ANNIVERSARY INDY PACE CAR DECAL PACKAGE
This is a 19 piece graphics package, instructions, and applicator squeegee. Again this will be a limited availability. Retail is $495.00 plus s&h. Your cost is $465.00 plus s&h.
IT?S OFFICIAL!!
RM Racing?s C5 Twin Flow Air Intake is now an Officially Licensed GM Product Independently dyno tested with peak gains up to 10+ hp at the rear wheels 3.5? mandrel bent, merged air tubes constructed of aluminized steel Black wrinkle powder coated to resist corrosion and to match the C5?s other engine components T-304 stainless steel coupler Installation time is 25 minutes with no modifications required RETAIL $395.00 FORUM COST $355.00
CORSA EXHAUST We offer the famous Corsa Exhaust systems for C5 and C4 Corvettes! Corsa also offers systems for the new Silverado/Sierra Pickups Tahoe/Suburbans/Yukon/Escalade and the AvalancheCall us at 406-628-4121 or email at
corvetteparts@hotmail.com for the current special pricing.
WE CAN MATCH OR BEAT MOST PRICES!
2003 GM PERFORMANCE PARTS CATALOGUE NOW AVAILABLE $5.95 THE SAME CATALOGUE IS ALSO AVAILABLE ON CD..special order $8.95
C: TECHNICAL BULLETINS..RECALLS..INFORMATION
Stainless Steel Brake Hoses
This report is from the July 2004 GM Techlink publication
Owners of some Corvettes have experienced Service ABS, Service Traction Control messages. Wheel speed sensor codes may be set. This condition may be caused by replacing the OEM rubber brake hoses with aftermarket stainless steel brake hoses.It is beleived that the metal in the brake lines conducts static electricity, causing confusion in the wheel speed sensors.GM says the brake hoses must be returned to original rubber ones before the case can be investigated.
2003 Corvette-Cadillac XLR new fuel tank system
This report is from the March 2004 GM Techlink publication
Partway through model year 2003, a new fuel tank system was introduced on the Corvette. This system continues with slight differences in the 2004 Corvette and Cadillac XLR.For 2003 Corvettes only, this system was designated by RPO code FFS. However, this name has been unofficially applied to all vehicles with the new system.
ADVANTAGES AND FEATURES
The new fuel tank system was designed to accommodate future LEV 2 emission requirements. This was accomplished by moving as many components and fuel lines as possible inside the fuel tanks, to minimize hydrocarbon emissions. A flexible metal crossover hose assembly replaces the former rubber one, because the permeable rubber allowed a small amount of hydrocarbon to pass through.The redesign also includes more isolation and noise control for the electric fuel pump, which now has greater flow capacity to supply higher output engines.On the XLR only, a speed control module slows the fuel pump when the engine is idling, to further control pump noise.
COMPONENT LAYOUT
Two fuel tanks are used, and they?re joined by crossover plumbing. The left side (driver side) tank is considered the primary, and the right side (passenger side) is secondary.Each tank contains a sensor module, which includes a float and resistor card.On the left side, the sender module includes a reservoir, containing the turbine fuel pump. There?s also a primary fuel pressure regulator and a venturi pump. The left tank is also supplied by the fuel fill hose, and has a rollover vent valve.On the right side, the sender module contains a secondary fuel pressure regulator and a siphon jet pump. There is also a fill limiting valve.
FLVV.OPERATION
When the fuel tanks are filled, fuel first fills the left tank. As the fuel rises to the level of the crossover, fuel flows into the right tank. As fuel occupies the interconnected tanks, air is forced to vent from the tanks, through the FLVV in the right tank. When both tanks are full, the FLVV float in the right tank closes, preventing fuel from entering the vent system. This also causes fuel to back up in the fill hose, causing the gas pump nozzle to shut off.When the engine is running, the turbine fuel pump in the left tank pressurizes the fuel fee pipe. The entire fuel supply system, from the pump to the injectors, is pressurized. The turbine pump creates more pressure and more fuel flow than the engine needs. Excess pressure and excess fuel is allowed to bleed back into the left tank by the primary fuel pressure regulator within the tank.The pressure regulator is in the fuel tank, not on the fuel rail on the engine. This type of fuel system is called returnless, or demand. This means that excess fuel is diverted before it leaves the tank, instead of passing through the fuel rail before being diverted. The result is that hot fuel is not constantly returning from the engine compartment, so the fuel in the tank stays cooler, improving evaporative emissions.The majority of the pressurized fuel is directed through the filter and on to the fuel feed pipe to the engine, where it is injected into the cylinders for combustion.Some of the pressurized fuel is directed through a feed pipe inside the crossover hose, to a siphon jet pump in the right tank. The jet pump relies on the venturi effect to use pressurized fuel to draw additional fuel from the tank. The combined fuel then flows from the right tank to the left tank, through a return pipe inside the crossover hose. The jet pump is able to move enough fuel to ensure that all of the fuel in the right tank is consumed before the level in the left tank begins to drop.The return tube in the left tank has an anti-siphon hole, so the fuel in the left tank does not siphon back to the right side when the vehicle is shut down.Some of the pressurized fuel is directed to a venturi pump in the left tank. This pump uses fuel flow to siphon fuel from the main tank into the reservoir, to keep the turbine pump supplied with fuel at all times. As the left tank fuel level drops, the venturi pump scavenges all of the remaining fuel into the reservoir, regardless of the vehicle?s attitude.When the engine is shut off and the turbine pump stops, a reverse flow check valve maintains pressure in the system to ensure rapid pressure buildup during the next startup cycle.
OPERATION OF FUEL LEVEL GAUGE
When the fuel system is operating as designed, starting with both tanks full, the left tank will remain full until the right tank is depleted. Then the left tank will be emptied.Each fuel tank has its own sensor . The PCM supplies a reference of 5 volts to the two sensors. Each sensor operates across a range from full (2.5 volts) to empty (0.7 volts). The PCM monitors the fuel level sensor voltages and calculates how much fuel is in the two tanks. The readout of the IP fuel level gauge is a result of this calculation.
GM OIL LIFE SYSTEM...HOW DOES IT REALLY WORK ?
This is taken from the May 2003 GM Techlink publication
How often should engine oil be changed? 3,000 miles, 5,000 miles, 7,500 miles, 10,000 miles? Actually, all of these are correct, depending on operating conditions. Oil life is affected by many factors other than just miles driven. The type of driving, temperature, and engine load all play a part.That?s why GM has developed the GM Oil Life System, an electronic watchdog that keeps track of all these variables and notifies the driver when it?s time to change oil. This system has become standard equipment on nearly all GM products since 2000.Briefly, the Oil Life System is programmed with a certain number of engine revolutions. As the engine runs, this number is reduced until it reaches zero, and the Oil Life light or message comes on. But there?s more. Operating the engine under low or high temperatures, and under high load conditions subtracts (penalizes) extra revolutions, so the light comes on sooner. Changing engine oil according to actual need rather than an inflexible schedule provides several benefits.First is simplified determination about when to change oil. No more decisions about normal conditions vs. severe conditions. Second is reduced operating costs for GM?s customers, who now have to change oil only when it?s needed. Third is minimizing the amount of used oil that must be disposed of. And fourth, engines will always be running with sufficiently fresh oil, for long life. Traditionally, the vehicle maintenance schedule has been based on miles or time, while the oil change interval is now based on the GM Oil Life System.When the change engine oil light or message comes on, it means that service is required on the vehicle. I should be serviced as soon as possible within the next 600 miles. It is possible that, under the best conditions, the engine oil life system may not indicate that vehicle service is necessary for over a year. However, engine oil and filter must be changed at least once per year, and at this time the system must be reset.
HOW DO I RESET?
The oil reset information is in your owners manual. This is how to reset the 2001-2004 corvette.Turn the ignition to ON, with the engine off. Press the trip button so the OIL LIFE percentage is displayed.Press RESET and hold for two seconds. OIL LIFE REMAIN 100% will appear.
2003 Convertibles and Z06 ..rear decklid not flush or only one strut on hinge.
Technical Service Bulletin 03-08-66-001 dated 01/13/03
This bulletin calls for replacing the RH deck lid hinge and installing two rear struts. This is not a recall, but a bulletin telling the dealer how to do the repair for this complaint, and is covered while the car is under warranty.
AUDIBLE SPARK KNOCK (DETONATION) MIL ILLUMINATED
Technical Service Bulletin 02-06-04-023 dated 05/01/02
If you have DTC P0332 set ( replace rear bank knock sensor and rtv area around sensor) This applies to 1998-2002 Camaro, Corvette, and Firebird with 5.7L engine (vin G ? RPO LS1)
DOOR GLASS RATTLE
Technical Service Bulletin 83-15-05 dated 04/24/1998
This bulletin refers to door glass rattles in the full down position when closing the door. This rattle is probably the result of the glass rattling against the regulator pulley and cable guide.Remove the trim pad, clean cable guide and roller with general purpose cleaner. Install a piece of hook and loop material (loop side) to the center of the roller and also to the front or rear green color cable guide. Reinstall the trim pad.
SPECIAL CONSIDERATIONS FOR AGM BATTERIES
This is a quote from the August 2002 Tech Link Publication
The Absorbent Glass Mat (AGM) battery uses absorbent glass mats to hold a small amount of electrolyte in contact with the plates. The battery uses gas recombinant technology, which means the gases produced at the plates are recombined to form water before they escape. This battery design offers higher power for lower weight, and is more resistant to high temperatures, vibration and cycling, making it ideal for the Chevrolet Corvette.The AGM battery may be charged using the new automatic charges. However, when using a conventional charger, limit the rate to 10 amperes or less. Do not allow the battery to charge at 3 amperes or more for longer than 10 hours, or 10 amperes or more for longer than 5 hours. When these limits are reached, allow the battery to stand overnight, then resume charging, if further charging is required.Check the voltage every 30 minutes and remove the battery from charge when the voltage reaches 15 volts at 3-10 amperes. The state of charge is now at 90 to 95%.
HYDRAULIC CLUTCH FLUID DISCOLORATION
This is a quote from the August 2002 Tech Link Publication
The hydraulic clutch system of 1997-2002 Chevrolet Corvettes may appear discolored. This discoloration is the result of carbon black used in the seal manufacturing process leaching out into the hydraulic fluid used in the clutch system.The discoloration may also collect on the inside of the clutch reservoir at the top of the fluid. This discoloration does not affect the operation of the clutch system and should not be considered a reason to flush the clutch hydraulic system.
WHISTLE NOISE FROM INTAKE MANIFOLD/THROTTLE BODY
This is a technical service bulletin for repair of this problem, it is not a recall. It covers 2001 Corvettes LS1, LS6 engines.
TSB # 02-06-01-021Some owners may comment on a whistle noise coming from either the intake manifold or the throttle body. The noise is most noticeable between 1100 and 2000 RPM.This bulletin calls for replacing the intake manifold.
DRIVER SEAT MOVEMENT DURING ACCELERATION AND BRAKING
This is a technical service bulletin out to repair this problem, it is not a recall. It covers 1997-2002 corvettes with power seats prior to vin 25106379. TSB # 02-08-50-002This bulletin calls for replacing both seat adjusters.
CONVERTIBLE TOP PAINT WEAR THROUGH AT FIFTH BOW
There is a new service bulletin out for this paint wear problem on 1998-2001 C5 convertibles. TSB # 02-08-111-001This is for cars that have paint around the tonneau cover at the 5th bow wearing through.The correction is to replace the 5th bow seal.THIS IS NOT A RECALL?but a how to repair the problem for service departments. If your car is still under warranty, I would call this to your dealers attention. If you are out of warranty and want the repair, contact me at corvetteparts@hotmail.com or call me at406-628-4618 and I can get you the repair info and part.
WATER LEAK PROBLEMS-REPAIRS
GM has released a new 9 page service bulletin dealing with probable causes and the repair for multiple waterleak areas on the C5. TSB #02-08-57-003 dated May 2002. If you are having a problem with yours and is under warranty contact your dealer and have them refer to this bulletin. If you are out of warranty give me a call at 406-628-4618 and I can go over your individual problem with you. This is too detailed to handle in an email.
STEERING COLUMN LOCK UP
Steering column may refuse to operate, DIC service message displayed. TSB # 01-02-35-008 refers to update column lock wiring, install revised relay and/or replace electronic column lock. This was a problem on all 1997 and certain 1998-2000 C5?s. Depending on the year and if manual or automatic trans.; parts cost range from wholesale price of 95.00 to 130.00. If you have this problem and the car is still under warranty take it to your dealer and have them refer to this bulletin. If not I can provide you the parts. Warranty labor time is about 1 hour to repair. NOTE: THERE IS NOW A RECALL ON THE STEERING COLUMN LOCK..GM is issuing the recall on all c5?s with the automatic trans. only at this time. The notices will go out in stages starting with model year 1997. This is due to availability of parts. All notices should be mailed to owners of all affected years by late summer of 04 GM says. If you are having a problem I would definitely contact your dealer even if you have not received a notice. As of this time GM is not planning on recalling the 6 speed cars. If you have any specific questions I suggest you contact Chevrolet Customer Assistance at 1-800-222-1020.
PREMATURE WEAR OF LEATHER MATERIAL ON BUCKET SEATBACK BOLSTER
1997-1999 Corvette built prior to vin breakpoint X5116322 This is a repair under warranty only, and calls for replacement of the seat cover assembly.
Tire Pressure Monitoring System Update
This is from a GM Tech Link Bulletin
Components: There is a separate sensor/transmitter in each wheel. The TPM (tire pressure monitor) system shares the receiver with the keyless entry system. Data from the receiver is displayed on the instrument panel, using the driver information center (DIC).Sensors: The sensor, with built-in valve stem, is inserted from the inside of the wheel, through a hole in the rim. It is retained by a nut (4 n.m, 35 lb. In.) and is sealed by a grommet. The sensor is powered by a lithium battery with a design life of 10 years. Each sensor is coded differently. This permits the receiver to determine exactly which tire is over or under inflated.Operation: The sensors operate only above 20 mph (32 kph) and transmit once per hour when parked, to preserve battery power. If the pressure in a tire rises or falls outside the calibration limits, the condition is displayed by the DIC. The low limit is 24 psi (168 kPa) and the upper limit is 39 psi (272 kPa).Service: The sensors are lightweight, only about an ounce (28 g), and this small weight is easily accounted for during normal tire balancing. The sensors are mounted within the well of the rim. It?s important to be careful when using a tire mounting machine. The sensor could be damaged in two ways: either by direct contact with the machinery or by the bead of the tire as it is forced over the rim. The valve stem cap is made of aluminum and the valve core is nickel-plated to resist corrosion. The end of the stem serves as the sensor?s antenna.Tip: Do not replace either the cap or the valve with standard parts. This will interfere with the sensor?s ability to transmit. The TPM sensor is more precise than consumer-grade tire pressure gauges. It may be necessary to explain this if the customer routinely mis-inflates tires using a gas station gauge.Receiver Programming: The receiver is programmed at the factory to recognize which sensor is at each wheel location. If tires are rotated or a sensor is replaced, the receiver must be reprogrammed, following SI procedures. If the receiver is not reprogrammed, the system will continue to report the correct pressures, but will assign them to the wrong locations on the vehicle.Tip: There are two reprogramming methods. You must use the J-41760 Kent Moore magnet when a new sensor is installed. During tire rotation, you can use either the magnet or your Tech 2.Magnet Method: You will have only one minute between horn chirps, and five minutes overall, to complete the procedure once you start. With ignition on, engine not running, press both lock and unlock buttons on the key fob. A horn chirp within 10 seconds indicates that the receiver is in programming mode. At each wheel, hold the J-41760 magnet over the valve stem until the horn chirps, to force the sensor to transmit its code. You MUST follow this order: LF, RF, RR, LR. The horn chirps twice to indicate completion. Scroll through the DIC readout to verify all four pressures are displayed.Tech 2 Method: With the TPM reprogramming procedure on your Tech 2, you can command each sensor to its new location. As long as no new sensors are being installed, the magnet is not needed. Scroll through the DIC readout to verify all four pressures are displayed.NOTE: If you are wanting your own special magnet give Fichtner Chevrolet a call at 406-628-4618 or email at parts@fichtnerchevrolet.com to check on current price and avail.
MAGNETIC SELECTIVE RIDE CONTROL
If your 2003 corvette has magnetic selective ride control (RPO F55) and seems to have a stiff ride check this. This is new vehicle prep bulletin. When the ignition is turned off, the dampers offer very little damping. So, plastic stuffers are inserted in the dampers for shipping from the factory. The stuffers are to be removed during new vehicle prep. Failure to do so will result in customer dissatisfaction with the vehicle?s ride quality. See bulletin 02-03-11-002 for complete details. You can recognize the presence of Ride Control three ways: Ride control button on console, Corrugated dust boots on dampers, Yellow tabs protruding from dust boots. To remove the stuffers, lift the vehicle to allow the wheels to hang free. Reach from below, behind the tire. Compress the dust boot and pull the yellow tab to remove the stuffer. There is a stuffer on each damper, front and rear. After removing the stuffer, be sure to pull the dust boot down to cover the upper end of the damper tube.
D: SPECIALTY PARTS AND PART TECHNICAL INFORMATION
GM in their great wisdom is doing another design change on the (AQ9) sport style seat covers. Up till now you could get the outer bolster and insert as separate pieces for the seat back covers. Someone determined the zipper system was not satisfactory and has redesigned it, and you now get the bolster and insert together as a matched set. They also said the new zipper is not compatible with the old zipper system. Basicly this eliminates you from being able to two tone your seats as we could before. I had a polite but firm temper tantrum with them about this, but they are also drasticly changing the prices. Some are doubling, some by 50 %. It is not consistent, and pricing is looking into the matter. Until this matter is resolved pricing, availability and application will probably change on a daily basis. CALL if you are wanting to make a seat cover change, so we can get the latest info and prices for you. 406-628-4121
COLOR MATCH ON CARGO COVER LIDS
Some people have commented that the rear cargo covers are not an exact match to theirInterior color; mostly on the black. I have visited with GM and they say it is due mostly to slight variances in dye lots, and is not a defect in any way. They also said the direction of the carpet nap will make the color change slightly.
AC DELCO UPF 44 OIL FILTERS
UltraGuard Oil FiltersThe ACDelco UPF44 filter has a 98% efficiency rating at 8-10 microns. They trap particles up to four times smaller than particles trapped by conventional filters. They reduce engine wear by up to 74%. Ultraguard filters use 100% synthetic wire-backed gold media to ensure superior filtering and the gasket is Teflon coated. For more information please visit the ACDelco website at:
http://www.acdelco.com
2002 & NEWER LS6 AIR INTAKE COVER
The 2002 Air Cleaner Top Housing Cover is a SIMPLE snap-in replacement of the cover on any C5!! Our customers have reported a HUGE difference in throttle response in all gears and at all speeds. It obviously works because it is standard on the 2002 Z06! This is the least expensive and most effective modification you can make. Here are some dyno results: Allan Grossman (allanlaw on the Forum)HP increase from 294 to 308 TQ increase from 307 to 323 THANKS FOR THE INPUT ALLAN!! Go here for a photo: http://www.c5registry.com/2k2z06/photos/07l.jpg
WE ALSO HAVE SERVICE AND OWNERS MANUALS AVAILABLE FOR MOST GM CARS AND TRUCKS. Call or email for prices and availability.
*GM Licensed Corsa Exhaust Systems
We have just signed an agreement to stock and sell GM Licensed Corsa Exhaust Systems. I am pleased to be able to provide special pricing to CorvetteForum members. To place an order please call me at 406-628- 4121 or email us at corvetteparts@hotmail.com NOTE: Corsa has added a $75.00 surcharge for drop shipping. This is in addition to the regular freight charge. We will check all avenues to ship to you the least expensive way we have available. In most cases we will have the system shipped to us and then forward it on to you. CALL US FOR SPECIAL PRICES ON CORSA EXHAUST SYSTEMSWE CAN MATCH OR BEAT MOST PRICES! We also have the Corsa Tips available. Email or call for pricing and availability. CORSA TITANIUM EXHAUST IS AVAILABLE IN LIMITED SUPPLY!!
Call Bob or Tom for special pricing and availability. 406-628-4121 We have Corsa systems available for C4 applications as well as the new Silverado/SierraTahoe/Suburbans and Avalanche vehicles. Call us for special pricing.Prices do not include the S/H. Remember, we don?t charge an arm and a leg for the S/H.
*Remember that we sell all Genuine GM parts to CorvetteForum members at dealer wholesale prices without any sales tax. Further, we ship daily with UPS without EXHORBIDANT shipping and handling charges!
Call Bob or Tom today at 406-628-4121 to purchase these items!!
Parts Details:
Brakes C5 Corvette Section: Questions on Delco Durastop brakes and rotors?*AC Delco Durastop Performance now has a direct toll free number for technical advice and assistance. The number is 1-888-701-6169 C5 Durastop Performance Drilled/Slotted RotorsACDelco DuraStop are now offering drilled and slotted Performance Rotors for C5 Corvettes! The DuraStop Performance rotors are drilled and slotted to dissipate heat much quicker with an increase in overall performance. All rotors have been D3EA certified to assure quality as well.They are available NOW for immediate shipment.$59.95 per rotor Forum member price.
Z06 Calipers$411.56 For the complete set of 4 calipers.
Z06 2002-Newer Front Brake Pads ? Forum member price $125.43
C5 Original Equipment Brake PadsFront Set(4 pads) - Forum member price $77.00Rear Set(4 pads) - Forum member price $61.04
C5 GM Durastop Ceramic Brake PadsThey are $140.12 for a set of fronts and rears.
C5 Corvette Racing HD Front Brake Pads$114.75 per set(4 pads)
C5 Corvette ACDelco Durastop Ceramic Wave II Brake Pads
Noise Suppression: 100% shimmed, 100% slotted, 100% chamfered. AC Delco Durastop provides ultra-quiet braking due to the absence of iron and steel fibers in the friction formulation.Durability: Ceramic friction lasts longer than other non-ceramic friction.Low Dusting: AC Delco Durastop Ceramic Friction was specially developed to reduce the ANNOYING dust that is typically found in ordinary friction formulations.
Warranty: AC Delco Durastop Ceramic Friction will provide a limited lifetime warranty.These are available for many different GM models in addition to Corvettes!!
Leather Care:Lexol preserves, strengthens and beautifies leather! It protects old and new leather from cracking and premature aging. It is made with the finest tanning oils which bond to the leather fibers, nourishing the leather and leaving NO greasy residue. Use Lexol regularly to keep your leather looking and performing its best.This product is the only product endorsed by those who sell and distribute virgin leather. We have made arrangements to buy this product from a wholesaler and are passing the discounts on to all Forum members.Lexol premium applicator sponges are specifically designed for use with the Lexol leather treatment. They are composed of non-abrasive terry cloth wrapped over a sponge. They clean easily and are machine washable. Each package includes two applicators.Lexol Leather Cleaner. Corvette Forum member price $5.95.Lexol Leather Treatment. Corvette Forum member price $5.95.Lexol Applicators. Corvette Forum member price for package of 2 $5.00
Paint Repair:We now stock the GM Vehicle Care Paint Chip Repair Kit. The kit includes a spot sanding pen, clear coat paint, ultra fine polish, paint applicators, mico-fine polishing sandpaper, and a special flexible sanding block. Everything you need except for the color paint! Corvette Forum member price $8.68 per Repair Kit.We also carry the touch-up paint to match your car. Corvette Forum member price $7.50 per tube and $9.50 per spray can.
Genuine GM/AC Delco Parts for C1, C2, C3 and C4 Corvettes!!We are pleased to announce that we are now offering Genuine GM/AC Delco parts for all years of Corvettes as available from GM at dealer wholesale pricing. Our parts department is ready to accept your orders today!
C5 Remote 12 Disc CD Changer & HarnessWe are pleased to announce that the Changers and Installation Kits including all wiring harnesses are now available. This package can be installed in any C5 having the Bose in-dash CD or Cassette.12 Disc CD Changer $395.00 Forum Member PriceInstallation Kit $99.95 Forum Member Price12 Disc CD Caddy $49.39 Forum Member Price12 Disc Changer wire harness only $47.92 Forum Member Price
European Lamps
We have sold hundreds of sets of European Headlamps, Taillamps, Rear Side Marker Lamps, and Front Marker/Turn Signal Lamps.European Headlamps $156.30/pair Forum member price
European Taillamps-Red/Clear $38.08/pair Forum member price
European Taillamps ? Red/Amber $105.04/pair Forum member price
European Rear Side Marker Lamps $16.68/pair Forum member price
European Front Side Marker/Turn Signal Lamps $134.98/pair Forum member price We also have the connectors for the European Headlamps in stock!
Interior Trim
We have added a complete list of seat trim, door panels, and lower dash components to change your C5 interior to either the Torch Red, Oak, or Light Gray Custom Leather Trim offered on Coupes and Convertibles or to the Modified Torch Red Z06 Leather Trim.Check the complete parts listing below for the items and pricing.
Removable Top Rear Storage Compartment Retainers We have these available for 1997-2004 Coupes. This is the retainer that has the rubber tip that holds the removable top securely in place while stored in the back of the coupe. Unfortunately the tip is not serviced separately. GM only offers the entire retainer assembly.
C5 Lug Nut Covers & Locking Lug NutsBlack Lug Nut Covers. $1.39 per cover Forum member price
Gray Lug Nut Covers. $2.71 per cover Forum member price
Locking Lug Nut Set. $22.95 Forum member price
2002 Mid Year Stainless Capped Lug Nuts. $2.94 per nut Forum member price
2002 Mid Year Locking Lug Nut Set. $22.95 Forum member price.
Z06 Items: Z06 LS6 ManifoldPackage Includes: LS6 Manifold, CrossOver Pipe, CrossOver Pipe PlugsForum Member Price $509.82
Z06 Clutch/Flywheel PackageThe pressure plate/disc and flywheel are $399.46
LS6 clutch slave cylinder assy $106.63
LS6 clutch master cylinder assy $106.63
Z06 Grilles Easy to mount with two-sided tape, velcro or by drilling the front fascia and securing with fasteners. You may use the grilles with the fog lamps and either with or without the stock filler panel. For functionality you should remove the stock filler panel thus allowing more air into the engine compartment.$51.52 Forum member price per side
Z06 Fuel Rail CoversSimple to install direct snap on replacements for the stock 1999-2002 LS1 fuel rail covers. The Forum member price is $104.12 per pair
Z06 Aluminum Wheels 2001 StyleRetro fit your Coupe/Convertible/Hardtop or buy an extra set for your Z06! Note: We will need a Z06 serial # to order these from GM as they are under order control.2002 Style Z06 Wheels now available..call us for pricing
Rear Compartment Cover and Retainers for the 2001/2002 Z06This is the cover that is standard on the Coupe & Convertible. Black carpeted cover with the retainers and latches included: Forum Member Price $90.51 for the cover and $2.97 per latch. The side covers are also available at 79.28 ea and the latch?s are 2.97 ea.
Transparent Roof Panel for 1997-2003 CoupesThis is a complete assembly including latches, retainers, side weatherstrips, and blow out clips: Forum Member Price $995.00
Primed Roof Panel for 1997-2003 Coupes- same as above
Wheels: High Polished Forged & Painted Cast Aluminum Wheels:We are once again taking orders for and shipping High Polished FORGED Aluminum Wheels! Check price list for latest pricing. The 2nd design Painted Cast Aluminum Wheel is now available for immediate shipment should anyone desire to update their 1997-1999 Corvette. This is the wheel with slightly larger spokes, painted in silver that was introduced midway thru 2000.Check price list for latest pricing.
Passenger Side Air Bag Cutoff Switch
Many of you have requested information on the air bag cutoff switches for C5?s. We are offering the kits at special pricing for Forum members!Here are the details:1) This is a complete kit including instructions.2) The kit has a part number based on year, body style and interior color.3) Pricing: $110.50 plus S&H to Forum members.4) Availability: Orders are arriving daily.5) Ordering instructions: Call Bob at 406-628-4121. He will need your complete VIN, shipping instructions and credit card number.We also have the center console bezel with the airbag on/off indicator now available! Note: We have air bag cut off packages available for many different GM vehicles. These are completely legal and offered by GM as a retrofit kit.Call us at 406-628-4618 or email at corvetteparts@hotmail.com for complete informationPlease supply the vehicle vin # so we can get you the correct information.
Suspension Packages:Z51 Suspension upgrade Package (GM Accessory)
NOTE THAT THE LINKS INCLUDED IN THE PACKAGE ARE THE SAME AS THE 2002 AND NEWER Z06 ALUMINUM LINKS.Note that you do not need to replace the front shaft insulator brackets per the parts catalog from GM. This package is assembled with the individual components that make up the changes in the factory installed 2000-2002 Z51 suspension package. This package has been installed by many forum members on 1997-2002 C5?s having the standard suspension, F45 suspension or pre-2000 Z51 suspension with fantastic results. You will not sacrifice any ride quality but will dramatically improve the handling and feel of your C5. FOR MORE DETAIL ON THE Z51 PACKAGE AND IT?S INSTALLATION PROCEDURE, PLEASE VISIT CHAZ?S PAGE (HE?S A FORUM MEMBER): http://www.chazcone.com/corvette/z51/
NOTE: THE REAR BRACKETS ARE NO LONGER REQUIRED AND WE NOWINCLUDE (4) ALUMINUM LINKS. Z06 Suspension upgrade PackageNOTE THIS IS THE 2002 & NEWER STYLE Z06 BAR PACKAGEThe package includes front and rear bars, front and rear bushings, and front and rear aluminum links. Installation info is the same as the above Z51 kit. NEW PARTS ORDER LINK, CLICK HERE http://www.corvetteforum.net/c5/ken...artspage1.shtml
E: SHIPPING AND WARRANTY INFORMATIONSHIPPING POLICY:Shipping and Insurance are additional on each order unless otherwise specified. Ground shipping is standard with air available upon request with an additional charge. In certain situations a drop ship direct from GM or the manufacturer is used, especially on large items.
Shipping and handling-std ground
Up to $50.00??????????..?$ 8.99
$50.01 to $100.00????????.$ 12.99
$100.01 to $200.00???????.$ 15.99
$200.01 to $400.00???????.$ 22.99
$400.01 to $500.00???????.$ 26.99
$500.01 to $600.00???????.$ 29.99
$600.01 to $800.00???????$ 36.99
$800.01 to $1000.00??????$ 39.99
$1000.01 to $1500.00?????.$49.99
$1500.01 and up??..$59.99
For extra heavy parts like clutch?s, rotors, exhaust systems etc. call for shipping quote.Some parts are oversize or extra heavy call 406-628-4618 or email at Parts@FichtnerChevrolet.com for shipping charges on these items.
RUSH AND AIR SHIPPMENTS ARE ALSO AVAILABLE, CALL OR EMAIL FOR PRICESWheels will also have a $ 5.00 per wheel packaging charge
FICHTNER CHEVROLET TERMS AND CONDITIONS OF SALE
Prior authorization must be given before any return may be made. All parts must be in the original, un-opened, un-damaged container or box. A copy of the original invoice must accompany the returned goods. Shipping costs will be the responsibility of the purchaser and a 20% restocking fee may apply. Electrical parts are non returnable, and no returns will be accepted after 30 days.Fichtner Chevrolet reserves the right to change pricing at any time for any reason, or refuse to sell a part for any reason.
WARRANTIES:Any warranties on the products sold are those made by the manufacturer. Fichtner Chevrolet expressly disclaims all warranties, either express or implied. The purchaser is responsible for determining the suitability and acceptance of any and all products purchased or installed. This includes OE replacement parts as well as modifications and upgrades. Thanks for reading this section of this weeks? news!
Bob
Be sure to check the important announcements section!
REMEMBER WE OFFER ANY GM PART AT GM WHOLESALE PRICES FOR ANY GM VEHICLE!!!
TECHNICAL BULLETIN & INFORMATION IS IN SECTION COUR HOURS ARE 7:30 TO 5:30 MOUNTAIN TIME MONDAY THRU FRIDAY 8:00 TO 12:00 MOUNTAIN TIME SATURDAY OUR PARTS HOTLINE IS 406-628-4121 or 406-628-4618
Bob is extension 108 and Tom is extension 107FAX # 406-628-2025
EMAIL:Parts: [email]parts@fichtnerchevrolet.com
NEW DIRECT ORDER SITE FOR PARTS SPECIALS GO HERE FOR POPULAR PARTS SPECIALS
http://www.corvetteforum.net/c5/ken...artspage1.shtml
ANY ORDERS OVER $100.00 IF YOU INCLUDE YOUR VIN #, WE WILL GIVE YOU AT NO CHARGE A COMPLETE WARRANTY HISTORY AND BUILD SHEET BREAKDOWN ON YOUR VEHICLE. THIS IS FOR ANY GM VEHICLE NOT JUST CORVETTE. GM HAS THIS ON FILE FOR MOST VEHICLES BACK TO ABOUT 1990. FOR ORDERS ON THE ABOVE WEB SITE INCLUDE YOUR VIN IN THE SHIPPING INFORMATION SECTION.
A: IMPORTANT ANNOUNCEMENTS
New email addresses!! Parts: [email]parts@fichtnerchevrolet.com
This site is completely secure, no need to worry about credit card #
NEW C6 SECTION!! I will also be starting a separate C6 post next week!
GM HAS REDUCED THE PRICE ON THE PERFORMANCE ROTORS AND CERAMIC BRAKE PADS BY OVER 70%
AC DELCO DURASTOP CERAMIC BRAKE PADS $118.13 FOR THE SET OF FRONTS AND REARS
AC DELCO PERFORMANCE DRILLED AND SLOTTED ROTORS$59.95 EA
CHECK OUT THE PROMO MODEL CLOSEOUT IN SECTION B!
GM CORVETTE ACCESSORIES WEB SITE
http://www.gmgoodwrench.com/accesso
HUMMER H2 PARTS NOW AVAILABLE AT WHOLESALE PRICES
WATCH FOR OUR WEEKLY SPECIALS ON SEPARATE POSTS ON THE FORUM
Due to the response to our specials on our web order site we will continue them !
WE NOW OFFER GIFT CARDS! THESE ARE AVAILABLE IN ANY DOLLAR INCREMENT UP TO $999 THESE ARE PURCHASEABLE WITH CHECK OR CASH. DUE TO THE PROGRAM RESTRICTIONS THEY CAN?T BE PURCHASED WITH A CREDIT CARD. IF YOU HAVE SOMEONE THAT IS HARD TO BUY FOR, BUT YOU KNOW THEY ALWAYS ARE AFTER PARTS FOR THEIR VEHICLES THIS IS AN OPTION. FOR FURTHER INFORMATION CALL BOB, TOM OR KEN AT 406-628-4618
TOP TIER DETERGENT GASOLINE
This is from August 2004 Tech Link
This information applies to all 2005 and prior General Motors passenger cars and trucks (US and Canada only)
Top Tier Detergent Gasoline, a new class of gasoline with enhanced detergency, will be appearing at retail stations of some fuel marketers. This gasoline meets new, voluntary deposit control standards developed by GM, BMW, Honda and Toyota.
The US EPA requires all gasoline sold in the US to contain a detergent additive. However, the requirement is minimal and in many cases is not sufficient to keep engines clean. A higher level of detergent is needed than what is required by the EPA. Top Tier Detergent Gasoline exceeds the detergent requirements imposed by the EPA.
The four corporations recognized the benefits to both the vehicle and the consumer. Also, joining together emphasized the low detergency is an issue of concern to several automotive companies. All vehicles will benefit from using Top Tier Detergent Gasoline, which will help keep engines cleaner than gasoline containing the lowest additive concentration set by the EPA. Clean engines help provide optimal fuel economy and performance, and reduced emissions. Those vehicles that have experienced deposit related problems would especially benefit from use of Top Tier Detergent Gasoline.
The Top Tier program, begun on May 3, 2004 is a voluntary program initiated by the four automotive companies. Some fuel marketers have already joined, although not all fuel marketers will offer Top Tier Detergent Gasoline. Once fuel marketers make public announcements, a list of all fuel marketers meeting Top Tier standards will be made available. For now, it will be necessary to look for the “Top Tier” designation at the gas pump.
C6 SECTION
AS SPECIAL PARTS COME AVAILABLE I WILL BE ADDING THEM HERE AS OF NOW ONLY SOME OF THE C6 ACCESSORIES ARE AVAILABLE, GM SAYS THE REST ARE COMING SOON!
ACCESSORIES
Rear Spoilers..available pre-painted in Precision Red, Silver, Orange, and Blue. They list for $175.00 and your cost is $150.00
Door Handles,.available in the same four colors..list $100.00 and cost is $80.00 a pair.
Brushed Aluminum Door Sill Plates..list $80.00 and cost is $65.00
Storange Pouch..single..list $115.00 and cost is $95.00
Rear license plate holder..available in above 4 colors plus black. List is $65.00 and cost is $55.00
Other accessories that GM says is coming soon:
Storage Pouch-set of 2
Transparent removable roof panel
Front license plate holder..available in all colors except black
Cargo organizer
Removable roof panel storage bag and bracket
18” & 19” cast aluminum 10-spoke wheels (available polished or with painted silver, gold, and gun metal finish)
Exhaust plate screen
Cockpit wind break
Body Colored Interior Trim Package
CD changer
Woven Mesh side cover inserts
Chrome door handles
Decklid liner with embroidered logo (convertibles only)
Manual shift **** & boot –color keyed to interior
Park brake handle & boot – color keyed to interior
Front end cover
C6 BULLETINS
Corvette Keyless Ignition
Taken from August, 2004 Tech Link
The 2005 Corvette keyless access system uses a coded transmitter fob. With the transmitter fob inside the passenger compartment, pressing the START button on the instrument panel starts the engine. The engine is turned OFF by briefly pressing he OFF/ACC button. TIP: In most respect, this system is identical to the one used on the Cadillac XLR. However, there are some differences in the keyless access system when the Corvette is equipped with a manual transmission.
The ignition is not designed to turn off on vehicles equipped with a manual transmission unless the transmission is in Reverse. This means the ignition state will be Key On, Engine Off if the transmission is not in Reverse when the OFF/ACC button is pressed.
This can affect some service procedures because the engine control module (ECM) remains awake in the Key On, Engine Off state.
TIP: When performing any service procedure calling for turning the ignition OFF on a manual transmission car, be sure to place the transmission in Reverse before pressing the OFF/ACC button.
After a reprogramming event or after performing a CKP System Variation Learn Procedure, it’s necessary to turn the ignition OFF for a period of tiem, to allow the date to be written to long term memory. If the transmission is not in Reverse, the data will never be written to long term memory because the ECM is waiting for the ignition state to be OFF.
If the engine is started or the ignition is turned back to RUN under the assumption that the ignition had been turned off after the procedure, the write is aborted and all of the learned information is lost.
In the case of an ECM reprogramming or replacement, it could appear that the ECM did not properly program. With a CKP learn, the ECM will not store the learned values, which may cause DTC”s to set.
Condition Button Press What Happens
engine off, ignition off press START ignition ON, engine starts
auto trans in park, press OFF/ACC engine OFF, ignition OFF,
engine running. RAP enabled for 20 mins.
auto trans in park,
enine Off, ignition OFF press OFF/ACC ACC enabled
manual trans in reverse,
engine running press OFF/ACC engine OFF, ignition OFF,
RAP enabled for 20 mins.
manual trans not in
reverse, engin running press OFF/ACC key on, engine off
either trans, engine off,
ignition off press OFF/ACC ACC enabled
either trans, engine off,
ingition off press OFF/ACC
for 5 seconds key on, engine off
C5 SECTION
UPF 44 FILTERS ARE STILL AVAILABLE FOR 6.95 EA IN QUANTITIES OF 6 OR MORE!
REGULAR PRICE IS 7.95 EA.
B: NEW PRODUCTS
PROMO MODEL SPECIALS ONLY A FEW LEFT OF EACH OF THESE MODELS!!
2001 Convertible-discounted to $29.00 with free shipping
white exterior with red interior
CLOSEOUT PRICE?$25.00 FREE SHIPPING
2001 Z06 Hardtop-discounted to $29.00 with free shipping
millennium yellow with black interior
CLOSEOUT PRICE?$25.00 FREE SHIPPING
1963 Corvette Split Window Coupe Combo- discounted to $50.00 with free shipping
In commemoration of this unique car Chevrolet authorized the release of a special promo package that includes: two 1:25 scale plastic promotional models pre-colored in Bronze and Black with highly detailed chassis and interiors
.CLOSEOUT PRICE?39.95 FREE SHIPPING
1963 Corvette Convertible and Split Window Coupe Combo
This is a new kit, the convertible is light blue with dark blue interior. The coupe is dark blue with oak interior. This is a limited edition collectors set certified by GM. We have them on special at 69.00 with free shipping.
CLOSEOUT PRICE? $47.95 FREE SHIPPING
2003 ZO6 Black with red interior
sale price..$29.95 plus $6.99 shipping
CLOSEOUT PRICE $22.95 FREE SHIPPING
2003 Coupe Electron Blue with black interiorsale price..$29.95 plus $6.99 shipping
CLOSEOUT PRICE $22.95 FREE SHIPPING
50TH ANNIVERSARY INDY PACE CAR DECAL PACKAGE
This is a 19 piece graphics package, instructions, and applicator squeegee. Again this will be a limited availability. Retail is $495.00 plus s&h. Your cost is $465.00 plus s&h.
IT?S OFFICIAL!!
RM Racing?s C5 Twin Flow Air Intake is now an Officially Licensed GM Product Independently dyno tested with peak gains up to 10+ hp at the rear wheels 3.5? mandrel bent, merged air tubes constructed of aluminized steel Black wrinkle powder coated to resist corrosion and to match the C5?s other engine components T-304 stainless steel coupler Installation time is 25 minutes with no modifications required RETAIL $395.00 FORUM COST $355.00
CORSA EXHAUST We offer the famous Corsa Exhaust systems for C5 and C4 Corvettes! Corsa also offers systems for the new Silverado/Sierra Pickups Tahoe/Suburbans/Yukon/Escalade and the AvalancheCall us at 406-628-4121 or email at
corvetteparts@hotmail.com for the current special pricing.
WE CAN MATCH OR BEAT MOST PRICES!
2003 GM PERFORMANCE PARTS CATALOGUE NOW AVAILABLE $5.95 THE SAME CATALOGUE IS ALSO AVAILABLE ON CD..special order $8.95
C: TECHNICAL BULLETINS..RECALLS..INFORMATION
Stainless Steel Brake Hoses
This report is from the July 2004 GM Techlink publication
Owners of some Corvettes have experienced Service ABS, Service Traction Control messages. Wheel speed sensor codes may be set. This condition may be caused by replacing the OEM rubber brake hoses with aftermarket stainless steel brake hoses.It is beleived that the metal in the brake lines conducts static electricity, causing confusion in the wheel speed sensors.GM says the brake hoses must be returned to original rubber ones before the case can be investigated.
2003 Corvette-Cadillac XLR new fuel tank system
This report is from the March 2004 GM Techlink publication
Partway through model year 2003, a new fuel tank system was introduced on the Corvette. This system continues with slight differences in the 2004 Corvette and Cadillac XLR.For 2003 Corvettes only, this system was designated by RPO code FFS. However, this name has been unofficially applied to all vehicles with the new system.
ADVANTAGES AND FEATURES
The new fuel tank system was designed to accommodate future LEV 2 emission requirements. This was accomplished by moving as many components and fuel lines as possible inside the fuel tanks, to minimize hydrocarbon emissions. A flexible metal crossover hose assembly replaces the former rubber one, because the permeable rubber allowed a small amount of hydrocarbon to pass through.The redesign also includes more isolation and noise control for the electric fuel pump, which now has greater flow capacity to supply higher output engines.On the XLR only, a speed control module slows the fuel pump when the engine is idling, to further control pump noise.
COMPONENT LAYOUT
Two fuel tanks are used, and they?re joined by crossover plumbing. The left side (driver side) tank is considered the primary, and the right side (passenger side) is secondary.Each tank contains a sensor module, which includes a float and resistor card.On the left side, the sender module includes a reservoir, containing the turbine fuel pump. There?s also a primary fuel pressure regulator and a venturi pump. The left tank is also supplied by the fuel fill hose, and has a rollover vent valve.On the right side, the sender module contains a secondary fuel pressure regulator and a siphon jet pump. There is also a fill limiting valve.
FLVV.OPERATION
When the fuel tanks are filled, fuel first fills the left tank. As the fuel rises to the level of the crossover, fuel flows into the right tank. As fuel occupies the interconnected tanks, air is forced to vent from the tanks, through the FLVV in the right tank. When both tanks are full, the FLVV float in the right tank closes, preventing fuel from entering the vent system. This also causes fuel to back up in the fill hose, causing the gas pump nozzle to shut off.When the engine is running, the turbine fuel pump in the left tank pressurizes the fuel fee pipe. The entire fuel supply system, from the pump to the injectors, is pressurized. The turbine pump creates more pressure and more fuel flow than the engine needs. Excess pressure and excess fuel is allowed to bleed back into the left tank by the primary fuel pressure regulator within the tank.The pressure regulator is in the fuel tank, not on the fuel rail on the engine. This type of fuel system is called returnless, or demand. This means that excess fuel is diverted before it leaves the tank, instead of passing through the fuel rail before being diverted. The result is that hot fuel is not constantly returning from the engine compartment, so the fuel in the tank stays cooler, improving evaporative emissions.The majority of the pressurized fuel is directed through the filter and on to the fuel feed pipe to the engine, where it is injected into the cylinders for combustion.Some of the pressurized fuel is directed through a feed pipe inside the crossover hose, to a siphon jet pump in the right tank. The jet pump relies on the venturi effect to use pressurized fuel to draw additional fuel from the tank. The combined fuel then flows from the right tank to the left tank, through a return pipe inside the crossover hose. The jet pump is able to move enough fuel to ensure that all of the fuel in the right tank is consumed before the level in the left tank begins to drop.The return tube in the left tank has an anti-siphon hole, so the fuel in the left tank does not siphon back to the right side when the vehicle is shut down.Some of the pressurized fuel is directed to a venturi pump in the left tank. This pump uses fuel flow to siphon fuel from the main tank into the reservoir, to keep the turbine pump supplied with fuel at all times. As the left tank fuel level drops, the venturi pump scavenges all of the remaining fuel into the reservoir, regardless of the vehicle?s attitude.When the engine is shut off and the turbine pump stops, a reverse flow check valve maintains pressure in the system to ensure rapid pressure buildup during the next startup cycle.
OPERATION OF FUEL LEVEL GAUGE
When the fuel system is operating as designed, starting with both tanks full, the left tank will remain full until the right tank is depleted. Then the left tank will be emptied.Each fuel tank has its own sensor . The PCM supplies a reference of 5 volts to the two sensors. Each sensor operates across a range from full (2.5 volts) to empty (0.7 volts). The PCM monitors the fuel level sensor voltages and calculates how much fuel is in the two tanks. The readout of the IP fuel level gauge is a result of this calculation.
GM OIL LIFE SYSTEM...HOW DOES IT REALLY WORK ?
This is taken from the May 2003 GM Techlink publication
How often should engine oil be changed? 3,000 miles, 5,000 miles, 7,500 miles, 10,000 miles? Actually, all of these are correct, depending on operating conditions. Oil life is affected by many factors other than just miles driven. The type of driving, temperature, and engine load all play a part.That?s why GM has developed the GM Oil Life System, an electronic watchdog that keeps track of all these variables and notifies the driver when it?s time to change oil. This system has become standard equipment on nearly all GM products since 2000.Briefly, the Oil Life System is programmed with a certain number of engine revolutions. As the engine runs, this number is reduced until it reaches zero, and the Oil Life light or message comes on. But there?s more. Operating the engine under low or high temperatures, and under high load conditions subtracts (penalizes) extra revolutions, so the light comes on sooner. Changing engine oil according to actual need rather than an inflexible schedule provides several benefits.First is simplified determination about when to change oil. No more decisions about normal conditions vs. severe conditions. Second is reduced operating costs for GM?s customers, who now have to change oil only when it?s needed. Third is minimizing the amount of used oil that must be disposed of. And fourth, engines will always be running with sufficiently fresh oil, for long life. Traditionally, the vehicle maintenance schedule has been based on miles or time, while the oil change interval is now based on the GM Oil Life System.When the change engine oil light or message comes on, it means that service is required on the vehicle. I should be serviced as soon as possible within the next 600 miles. It is possible that, under the best conditions, the engine oil life system may not indicate that vehicle service is necessary for over a year. However, engine oil and filter must be changed at least once per year, and at this time the system must be reset.
HOW DO I RESET?
The oil reset information is in your owners manual. This is how to reset the 2001-2004 corvette.Turn the ignition to ON, with the engine off. Press the trip button so the OIL LIFE percentage is displayed.Press RESET and hold for two seconds. OIL LIFE REMAIN 100% will appear.
2003 Convertibles and Z06 ..rear decklid not flush or only one strut on hinge.
Technical Service Bulletin 03-08-66-001 dated 01/13/03
This bulletin calls for replacing the RH deck lid hinge and installing two rear struts. This is not a recall, but a bulletin telling the dealer how to do the repair for this complaint, and is covered while the car is under warranty.
AUDIBLE SPARK KNOCK (DETONATION) MIL ILLUMINATED
Technical Service Bulletin 02-06-04-023 dated 05/01/02
If you have DTC P0332 set ( replace rear bank knock sensor and rtv area around sensor) This applies to 1998-2002 Camaro, Corvette, and Firebird with 5.7L engine (vin G ? RPO LS1)
DOOR GLASS RATTLE
Technical Service Bulletin 83-15-05 dated 04/24/1998
This bulletin refers to door glass rattles in the full down position when closing the door. This rattle is probably the result of the glass rattling against the regulator pulley and cable guide.Remove the trim pad, clean cable guide and roller with general purpose cleaner. Install a piece of hook and loop material (loop side) to the center of the roller and also to the front or rear green color cable guide. Reinstall the trim pad.
SPECIAL CONSIDERATIONS FOR AGM BATTERIES
This is a quote from the August 2002 Tech Link Publication
The Absorbent Glass Mat (AGM) battery uses absorbent glass mats to hold a small amount of electrolyte in contact with the plates. The battery uses gas recombinant technology, which means the gases produced at the plates are recombined to form water before they escape. This battery design offers higher power for lower weight, and is more resistant to high temperatures, vibration and cycling, making it ideal for the Chevrolet Corvette.The AGM battery may be charged using the new automatic charges. However, when using a conventional charger, limit the rate to 10 amperes or less. Do not allow the battery to charge at 3 amperes or more for longer than 10 hours, or 10 amperes or more for longer than 5 hours. When these limits are reached, allow the battery to stand overnight, then resume charging, if further charging is required.Check the voltage every 30 minutes and remove the battery from charge when the voltage reaches 15 volts at 3-10 amperes. The state of charge is now at 90 to 95%.
HYDRAULIC CLUTCH FLUID DISCOLORATION
This is a quote from the August 2002 Tech Link Publication
The hydraulic clutch system of 1997-2002 Chevrolet Corvettes may appear discolored. This discoloration is the result of carbon black used in the seal manufacturing process leaching out into the hydraulic fluid used in the clutch system.The discoloration may also collect on the inside of the clutch reservoir at the top of the fluid. This discoloration does not affect the operation of the clutch system and should not be considered a reason to flush the clutch hydraulic system.
WHISTLE NOISE FROM INTAKE MANIFOLD/THROTTLE BODY
This is a technical service bulletin for repair of this problem, it is not a recall. It covers 2001 Corvettes LS1, LS6 engines.
TSB # 02-06-01-021Some owners may comment on a whistle noise coming from either the intake manifold or the throttle body. The noise is most noticeable between 1100 and 2000 RPM.This bulletin calls for replacing the intake manifold.
DRIVER SEAT MOVEMENT DURING ACCELERATION AND BRAKING
This is a technical service bulletin out to repair this problem, it is not a recall. It covers 1997-2002 corvettes with power seats prior to vin 25106379. TSB # 02-08-50-002This bulletin calls for replacing both seat adjusters.
CONVERTIBLE TOP PAINT WEAR THROUGH AT FIFTH BOW
There is a new service bulletin out for this paint wear problem on 1998-2001 C5 convertibles. TSB # 02-08-111-001This is for cars that have paint around the tonneau cover at the 5th bow wearing through.The correction is to replace the 5th bow seal.THIS IS NOT A RECALL?but a how to repair the problem for service departments. If your car is still under warranty, I would call this to your dealers attention. If you are out of warranty and want the repair, contact me at corvetteparts@hotmail.com or call me at406-628-4618 and I can get you the repair info and part.
WATER LEAK PROBLEMS-REPAIRS
GM has released a new 9 page service bulletin dealing with probable causes and the repair for multiple waterleak areas on the C5. TSB #02-08-57-003 dated May 2002. If you are having a problem with yours and is under warranty contact your dealer and have them refer to this bulletin. If you are out of warranty give me a call at 406-628-4618 and I can go over your individual problem with you. This is too detailed to handle in an email.
STEERING COLUMN LOCK UP
Steering column may refuse to operate, DIC service message displayed. TSB # 01-02-35-008 refers to update column lock wiring, install revised relay and/or replace electronic column lock. This was a problem on all 1997 and certain 1998-2000 C5?s. Depending on the year and if manual or automatic trans.; parts cost range from wholesale price of 95.00 to 130.00. If you have this problem and the car is still under warranty take it to your dealer and have them refer to this bulletin. If not I can provide you the parts. Warranty labor time is about 1 hour to repair. NOTE: THERE IS NOW A RECALL ON THE STEERING COLUMN LOCK..GM is issuing the recall on all c5?s with the automatic trans. only at this time. The notices will go out in stages starting with model year 1997. This is due to availability of parts. All notices should be mailed to owners of all affected years by late summer of 04 GM says. If you are having a problem I would definitely contact your dealer even if you have not received a notice. As of this time GM is not planning on recalling the 6 speed cars. If you have any specific questions I suggest you contact Chevrolet Customer Assistance at 1-800-222-1020.
PREMATURE WEAR OF LEATHER MATERIAL ON BUCKET SEATBACK BOLSTER
1997-1999 Corvette built prior to vin breakpoint X5116322 This is a repair under warranty only, and calls for replacement of the seat cover assembly.
Tire Pressure Monitoring System Update
This is from a GM Tech Link Bulletin
Components: There is a separate sensor/transmitter in each wheel. The TPM (tire pressure monitor) system shares the receiver with the keyless entry system. Data from the receiver is displayed on the instrument panel, using the driver information center (DIC).Sensors: The sensor, with built-in valve stem, is inserted from the inside of the wheel, through a hole in the rim. It is retained by a nut (4 n.m, 35 lb. In.) and is sealed by a grommet. The sensor is powered by a lithium battery with a design life of 10 years. Each sensor is coded differently. This permits the receiver to determine exactly which tire is over or under inflated.Operation: The sensors operate only above 20 mph (32 kph) and transmit once per hour when parked, to preserve battery power. If the pressure in a tire rises or falls outside the calibration limits, the condition is displayed by the DIC. The low limit is 24 psi (168 kPa) and the upper limit is 39 psi (272 kPa).Service: The sensors are lightweight, only about an ounce (28 g), and this small weight is easily accounted for during normal tire balancing. The sensors are mounted within the well of the rim. It?s important to be careful when using a tire mounting machine. The sensor could be damaged in two ways: either by direct contact with the machinery or by the bead of the tire as it is forced over the rim. The valve stem cap is made of aluminum and the valve core is nickel-plated to resist corrosion. The end of the stem serves as the sensor?s antenna.Tip: Do not replace either the cap or the valve with standard parts. This will interfere with the sensor?s ability to transmit. The TPM sensor is more precise than consumer-grade tire pressure gauges. It may be necessary to explain this if the customer routinely mis-inflates tires using a gas station gauge.Receiver Programming: The receiver is programmed at the factory to recognize which sensor is at each wheel location. If tires are rotated or a sensor is replaced, the receiver must be reprogrammed, following SI procedures. If the receiver is not reprogrammed, the system will continue to report the correct pressures, but will assign them to the wrong locations on the vehicle.Tip: There are two reprogramming methods. You must use the J-41760 Kent Moore magnet when a new sensor is installed. During tire rotation, you can use either the magnet or your Tech 2.Magnet Method: You will have only one minute between horn chirps, and five minutes overall, to complete the procedure once you start. With ignition on, engine not running, press both lock and unlock buttons on the key fob. A horn chirp within 10 seconds indicates that the receiver is in programming mode. At each wheel, hold the J-41760 magnet over the valve stem until the horn chirps, to force the sensor to transmit its code. You MUST follow this order: LF, RF, RR, LR. The horn chirps twice to indicate completion. Scroll through the DIC readout to verify all four pressures are displayed.Tech 2 Method: With the TPM reprogramming procedure on your Tech 2, you can command each sensor to its new location. As long as no new sensors are being installed, the magnet is not needed. Scroll through the DIC readout to verify all four pressures are displayed.NOTE: If you are wanting your own special magnet give Fichtner Chevrolet a call at 406-628-4618 or email at parts@fichtnerchevrolet.com to check on current price and avail.
MAGNETIC SELECTIVE RIDE CONTROL
If your 2003 corvette has magnetic selective ride control (RPO F55) and seems to have a stiff ride check this. This is new vehicle prep bulletin. When the ignition is turned off, the dampers offer very little damping. So, plastic stuffers are inserted in the dampers for shipping from the factory. The stuffers are to be removed during new vehicle prep. Failure to do so will result in customer dissatisfaction with the vehicle?s ride quality. See bulletin 02-03-11-002 for complete details. You can recognize the presence of Ride Control three ways: Ride control button on console, Corrugated dust boots on dampers, Yellow tabs protruding from dust boots. To remove the stuffers, lift the vehicle to allow the wheels to hang free. Reach from below, behind the tire. Compress the dust boot and pull the yellow tab to remove the stuffer. There is a stuffer on each damper, front and rear. After removing the stuffer, be sure to pull the dust boot down to cover the upper end of the damper tube.
D: SPECIALTY PARTS AND PART TECHNICAL INFORMATION
GM in their great wisdom is doing another design change on the (AQ9) sport style seat covers. Up till now you could get the outer bolster and insert as separate pieces for the seat back covers. Someone determined the zipper system was not satisfactory and has redesigned it, and you now get the bolster and insert together as a matched set. They also said the new zipper is not compatible with the old zipper system. Basicly this eliminates you from being able to two tone your seats as we could before. I had a polite but firm temper tantrum with them about this, but they are also drasticly changing the prices. Some are doubling, some by 50 %. It is not consistent, and pricing is looking into the matter. Until this matter is resolved pricing, availability and application will probably change on a daily basis. CALL if you are wanting to make a seat cover change, so we can get the latest info and prices for you. 406-628-4121
COLOR MATCH ON CARGO COVER LIDS
Some people have commented that the rear cargo covers are not an exact match to theirInterior color; mostly on the black. I have visited with GM and they say it is due mostly to slight variances in dye lots, and is not a defect in any way. They also said the direction of the carpet nap will make the color change slightly.
AC DELCO UPF 44 OIL FILTERS
UltraGuard Oil FiltersThe ACDelco UPF44 filter has a 98% efficiency rating at 8-10 microns. They trap particles up to four times smaller than particles trapped by conventional filters. They reduce engine wear by up to 74%. Ultraguard filters use 100% synthetic wire-backed gold media to ensure superior filtering and the gasket is Teflon coated. For more information please visit the ACDelco website at:
http://www.acdelco.com
2002 & NEWER LS6 AIR INTAKE COVER
The 2002 Air Cleaner Top Housing Cover is a SIMPLE snap-in replacement of the cover on any C5!! Our customers have reported a HUGE difference in throttle response in all gears and at all speeds. It obviously works because it is standard on the 2002 Z06! This is the least expensive and most effective modification you can make. Here are some dyno results: Allan Grossman (allanlaw on the Forum)HP increase from 294 to 308 TQ increase from 307 to 323 THANKS FOR THE INPUT ALLAN!! Go here for a photo: http://www.c5registry.com/2k2z06/photos/07l.jpg
WE ALSO HAVE SERVICE AND OWNERS MANUALS AVAILABLE FOR MOST GM CARS AND TRUCKS. Call or email for prices and availability.
*GM Licensed Corsa Exhaust Systems
We have just signed an agreement to stock and sell GM Licensed Corsa Exhaust Systems. I am pleased to be able to provide special pricing to CorvetteForum members. To place an order please call me at 406-628- 4121 or email us at corvetteparts@hotmail.com NOTE: Corsa has added a $75.00 surcharge for drop shipping. This is in addition to the regular freight charge. We will check all avenues to ship to you the least expensive way we have available. In most cases we will have the system shipped to us and then forward it on to you. CALL US FOR SPECIAL PRICES ON CORSA EXHAUST SYSTEMSWE CAN MATCH OR BEAT MOST PRICES! We also have the Corsa Tips available. Email or call for pricing and availability. CORSA TITANIUM EXHAUST IS AVAILABLE IN LIMITED SUPPLY!!
Call Bob or Tom for special pricing and availability. 406-628-4121 We have Corsa systems available for C4 applications as well as the new Silverado/SierraTahoe/Suburbans and Avalanche vehicles. Call us for special pricing.Prices do not include the S/H. Remember, we don?t charge an arm and a leg for the S/H.
*Remember that we sell all Genuine GM parts to CorvetteForum members at dealer wholesale prices without any sales tax. Further, we ship daily with UPS without EXHORBIDANT shipping and handling charges!
Call Bob or Tom today at 406-628-4121 to purchase these items!!
Parts Details:
Brakes C5 Corvette Section: Questions on Delco Durastop brakes and rotors?*AC Delco Durastop Performance now has a direct toll free number for technical advice and assistance. The number is 1-888-701-6169 C5 Durastop Performance Drilled/Slotted RotorsACDelco DuraStop are now offering drilled and slotted Performance Rotors for C5 Corvettes! The DuraStop Performance rotors are drilled and slotted to dissipate heat much quicker with an increase in overall performance. All rotors have been D3EA certified to assure quality as well.They are available NOW for immediate shipment.$59.95 per rotor Forum member price.
Z06 Calipers$411.56 For the complete set of 4 calipers.
Z06 2002-Newer Front Brake Pads ? Forum member price $125.43
C5 Original Equipment Brake PadsFront Set(4 pads) - Forum member price $77.00Rear Set(4 pads) - Forum member price $61.04
C5 GM Durastop Ceramic Brake PadsThey are $140.12 for a set of fronts and rears.
C5 Corvette Racing HD Front Brake Pads$114.75 per set(4 pads)
C5 Corvette ACDelco Durastop Ceramic Wave II Brake Pads
Noise Suppression: 100% shimmed, 100% slotted, 100% chamfered. AC Delco Durastop provides ultra-quiet braking due to the absence of iron and steel fibers in the friction formulation.Durability: Ceramic friction lasts longer than other non-ceramic friction.Low Dusting: AC Delco Durastop Ceramic Friction was specially developed to reduce the ANNOYING dust that is typically found in ordinary friction formulations.
Warranty: AC Delco Durastop Ceramic Friction will provide a limited lifetime warranty.These are available for many different GM models in addition to Corvettes!!
Leather Care:Lexol preserves, strengthens and beautifies leather! It protects old and new leather from cracking and premature aging. It is made with the finest tanning oils which bond to the leather fibers, nourishing the leather and leaving NO greasy residue. Use Lexol regularly to keep your leather looking and performing its best.This product is the only product endorsed by those who sell and distribute virgin leather. We have made arrangements to buy this product from a wholesaler and are passing the discounts on to all Forum members.Lexol premium applicator sponges are specifically designed for use with the Lexol leather treatment. They are composed of non-abrasive terry cloth wrapped over a sponge. They clean easily and are machine washable. Each package includes two applicators.Lexol Leather Cleaner. Corvette Forum member price $5.95.Lexol Leather Treatment. Corvette Forum member price $5.95.Lexol Applicators. Corvette Forum member price for package of 2 $5.00
Paint Repair:We now stock the GM Vehicle Care Paint Chip Repair Kit. The kit includes a spot sanding pen, clear coat paint, ultra fine polish, paint applicators, mico-fine polishing sandpaper, and a special flexible sanding block. Everything you need except for the color paint! Corvette Forum member price $8.68 per Repair Kit.We also carry the touch-up paint to match your car. Corvette Forum member price $7.50 per tube and $9.50 per spray can.
Genuine GM/AC Delco Parts for C1, C2, C3 and C4 Corvettes!!We are pleased to announce that we are now offering Genuine GM/AC Delco parts for all years of Corvettes as available from GM at dealer wholesale pricing. Our parts department is ready to accept your orders today!
C5 Remote 12 Disc CD Changer & HarnessWe are pleased to announce that the Changers and Installation Kits including all wiring harnesses are now available. This package can be installed in any C5 having the Bose in-dash CD or Cassette.12 Disc CD Changer $395.00 Forum Member PriceInstallation Kit $99.95 Forum Member Price12 Disc CD Caddy $49.39 Forum Member Price12 Disc Changer wire harness only $47.92 Forum Member Price
European Lamps
We have sold hundreds of sets of European Headlamps, Taillamps, Rear Side Marker Lamps, and Front Marker/Turn Signal Lamps.European Headlamps $156.30/pair Forum member price
European Taillamps-Red/Clear $38.08/pair Forum member price
European Taillamps ? Red/Amber $105.04/pair Forum member price
European Rear Side Marker Lamps $16.68/pair Forum member price
European Front Side Marker/Turn Signal Lamps $134.98/pair Forum member price We also have the connectors for the European Headlamps in stock!
Interior Trim
We have added a complete list of seat trim, door panels, and lower dash components to change your C5 interior to either the Torch Red, Oak, or Light Gray Custom Leather Trim offered on Coupes and Convertibles or to the Modified Torch Red Z06 Leather Trim.Check the complete parts listing below for the items and pricing.
Removable Top Rear Storage Compartment Retainers We have these available for 1997-2004 Coupes. This is the retainer that has the rubber tip that holds the removable top securely in place while stored in the back of the coupe. Unfortunately the tip is not serviced separately. GM only offers the entire retainer assembly.
C5 Lug Nut Covers & Locking Lug NutsBlack Lug Nut Covers. $1.39 per cover Forum member price
Gray Lug Nut Covers. $2.71 per cover Forum member price
Locking Lug Nut Set. $22.95 Forum member price
2002 Mid Year Stainless Capped Lug Nuts. $2.94 per nut Forum member price
2002 Mid Year Locking Lug Nut Set. $22.95 Forum member price.
Z06 Items: Z06 LS6 ManifoldPackage Includes: LS6 Manifold, CrossOver Pipe, CrossOver Pipe PlugsForum Member Price $509.82
Z06 Clutch/Flywheel PackageThe pressure plate/disc and flywheel are $399.46
LS6 clutch slave cylinder assy $106.63
LS6 clutch master cylinder assy $106.63
Z06 Grilles Easy to mount with two-sided tape, velcro or by drilling the front fascia and securing with fasteners. You may use the grilles with the fog lamps and either with or without the stock filler panel. For functionality you should remove the stock filler panel thus allowing more air into the engine compartment.$51.52 Forum member price per side
Z06 Fuel Rail CoversSimple to install direct snap on replacements for the stock 1999-2002 LS1 fuel rail covers. The Forum member price is $104.12 per pair
Z06 Aluminum Wheels 2001 StyleRetro fit your Coupe/Convertible/Hardtop or buy an extra set for your Z06! Note: We will need a Z06 serial # to order these from GM as they are under order control.2002 Style Z06 Wheels now available..call us for pricing
Rear Compartment Cover and Retainers for the 2001/2002 Z06This is the cover that is standard on the Coupe & Convertible. Black carpeted cover with the retainers and latches included: Forum Member Price $90.51 for the cover and $2.97 per latch. The side covers are also available at 79.28 ea and the latch?s are 2.97 ea.
Transparent Roof Panel for 1997-2003 CoupesThis is a complete assembly including latches, retainers, side weatherstrips, and blow out clips: Forum Member Price $995.00
Primed Roof Panel for 1997-2003 Coupes- same as above
Wheels: High Polished Forged & Painted Cast Aluminum Wheels:We are once again taking orders for and shipping High Polished FORGED Aluminum Wheels! Check price list for latest pricing. The 2nd design Painted Cast Aluminum Wheel is now available for immediate shipment should anyone desire to update their 1997-1999 Corvette. This is the wheel with slightly larger spokes, painted in silver that was introduced midway thru 2000.Check price list for latest pricing.
Passenger Side Air Bag Cutoff Switch
Many of you have requested information on the air bag cutoff switches for C5?s. We are offering the kits at special pricing for Forum members!Here are the details:1) This is a complete kit including instructions.2) The kit has a part number based on year, body style and interior color.3) Pricing: $110.50 plus S&H to Forum members.4) Availability: Orders are arriving daily.5) Ordering instructions: Call Bob at 406-628-4121. He will need your complete VIN, shipping instructions and credit card number.We also have the center console bezel with the airbag on/off indicator now available! Note: We have air bag cut off packages available for many different GM vehicles. These are completely legal and offered by GM as a retrofit kit.Call us at 406-628-4618 or email at corvetteparts@hotmail.com for complete informationPlease supply the vehicle vin # so we can get you the correct information.
Suspension Packages:Z51 Suspension upgrade Package (GM Accessory)
NOTE THAT THE LINKS INCLUDED IN THE PACKAGE ARE THE SAME AS THE 2002 AND NEWER Z06 ALUMINUM LINKS.Note that you do not need to replace the front shaft insulator brackets per the parts catalog from GM. This package is assembled with the individual components that make up the changes in the factory installed 2000-2002 Z51 suspension package. This package has been installed by many forum members on 1997-2002 C5?s having the standard suspension, F45 suspension or pre-2000 Z51 suspension with fantastic results. You will not sacrifice any ride quality but will dramatically improve the handling and feel of your C5. FOR MORE DETAIL ON THE Z51 PACKAGE AND IT?S INSTALLATION PROCEDURE, PLEASE VISIT CHAZ?S PAGE (HE?S A FORUM MEMBER): http://www.chazcone.com/corvette/z51/
NOTE: THE REAR BRACKETS ARE NO LONGER REQUIRED AND WE NOWINCLUDE (4) ALUMINUM LINKS. Z06 Suspension upgrade PackageNOTE THIS IS THE 2002 & NEWER STYLE Z06 BAR PACKAGEThe package includes front and rear bars, front and rear bushings, and front and rear aluminum links. Installation info is the same as the above Z51 kit. NEW PARTS ORDER LINK, CLICK HERE http://www.corvetteforum.net/c5/ken...artspage1.shtml
E: SHIPPING AND WARRANTY INFORMATIONSHIPPING POLICY:Shipping and Insurance are additional on each order unless otherwise specified. Ground shipping is standard with air available upon request with an additional charge. In certain situations a drop ship direct from GM or the manufacturer is used, especially on large items.
Shipping and handling-std ground
Up to $50.00??????????..?$ 8.99
$50.01 to $100.00????????.$ 12.99
$100.01 to $200.00???????.$ 15.99
$200.01 to $400.00???????.$ 22.99
$400.01 to $500.00???????.$ 26.99
$500.01 to $600.00???????.$ 29.99
$600.01 to $800.00???????$ 36.99
$800.01 to $1000.00??????$ 39.99
$1000.01 to $1500.00?????.$49.99
$1500.01 and up??..$59.99
For extra heavy parts like clutch?s, rotors, exhaust systems etc. call for shipping quote.Some parts are oversize or extra heavy call 406-628-4618 or email at Parts@FichtnerChevrolet.com for shipping charges on these items.
RUSH AND AIR SHIPPMENTS ARE ALSO AVAILABLE, CALL OR EMAIL FOR PRICESWheels will also have a $ 5.00 per wheel packaging charge
FICHTNER CHEVROLET TERMS AND CONDITIONS OF SALE
Prior authorization must be given before any return may be made. All parts must be in the original, un-opened, un-damaged container or box. A copy of the original invoice must accompany the returned goods. Shipping costs will be the responsibility of the purchaser and a 20% restocking fee may apply. Electrical parts are non returnable, and no returns will be accepted after 30 days.Fichtner Chevrolet reserves the right to change pricing at any time for any reason, or refuse to sell a part for any reason.
WARRANTIES:Any warranties on the products sold are those made by the manufacturer. Fichtner Chevrolet expressly disclaims all warranties, either express or implied. The purchaser is responsible for determining the suitability and acceptance of any and all products purchased or installed. This includes OE replacement parts as well as modifications and upgrades. Thanks for reading this section of this weeks? news!
Bob
Last edited by CorvettePartsBob; 10-04-2004 at 08:45 PM.
09-10-2004, 03:51 AM
#2
Burning Brakes
Member Since: Oct 2001
Location: Alhambra Calismognazifornia, in the country everyone comes just to complain but won't go back home!
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
parts webpage
Bob,
the link to your parts page isn't working.
has something changed or is this due to the server HD crash?
the link to your parts page isn't working.
has something changed or is this due to the server HD crash?
09-10-2004, 08:15 AM
#3
Bob, could you post your price and estimated availability of the transparent roof panel for the C6? There are a lot of us that had the dual roof package manually removed by GM, and got our cars with only the painted roof.
09-10-2004, 01:33 PM
#4
Melting Slicks
Thread Starter
Our parts page link is back up and working. It was related to the system crash here on the forum.
GM does not have a price or availability for the glass top yet. I have called GM Parts and they can only tell me they are in negotiations with the supplier for the part. I could have sold 20 or more already if we could get them. I will post as soon as we can get them from GM.
Bob
GM does not have a price or availability for the glass top yet. I have called GM Parts and they can only tell me they are in negotiations with the supplier for the part. I could have sold 20 or more already if we could get them. I will post as soon as we can get them from GM.
Bob
09-10-2004, 07:36 PM
#6
Burning Brakes
Member Since: Sep 2004
Location: Salinas Ca
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
C6 car cover
I'm about this ---->||<---- far away from ordering a "Silver Bullet" and have yet to find a definitive answer of where to get a form fitting car cover for it. I WOULD like to have the cover in hand bfore the car arrives.
ALSO - has anybody heard if "Speed Lingerie" has come up with a color coordinated bra yet? I know they're expensive as h*** but understand they are virtually invisible and do a super job of protecting the front end.
I have, in the past, been "anti-bra"(both in(on) my women and cars) but will make an exception for this car!
ALSO - has anybody heard if "Speed Lingerie" has come up with a color coordinated bra yet? I know they're expensive as h*** but understand they are virtually invisible and do a super job of protecting the front end.
I have, in the past, been "anti-bra"(both in(on) my women and cars) but will make an exception for this car!
10-04-2004, 11:35 PM
#8
Team Owner
Originally Posted by CorvettePartsBob
Our parts page link is back up and working. It was related to the system crash here on the forum.
GM does not have a price or availability for the glass top yet. I have called GM Parts and they can only tell me they are in negotiations with the supplier for the part. I could have sold 20 or more already if we could get them. I will post as soon as we can get them from GM.
Bob
GM does not have a price or availability for the glass top yet. I have called GM Parts and they can only tell me they are in negotiations with the supplier for the part. I could have sold 20 or more already if we could get them. I will post as soon as we can get them from GM.
Bob
10-04-2004, 11:35 PM
#9
Team Owner
Originally Posted by cam30era
Bob, could you post your price and estimated availability of the transparent roof panel for the C6? There are a lot of us that had the dual roof package manually removed by GM, and got our cars with only the painted roof.
