maybe just shy of 2"

Hey Dave, I came across another thread where you said that John bumped you up to a 10.5 wheel up front to clear C6 Z06 brakes. How much lip does your fronts have and do they stick out at all? I'm assuming you're talking about the black and yellow CCW wheels i asked about before. Thx, Ken

Thx for the reply Dave. I was hoping someone had the go to guy, lol. Thx again, Ken

Ordered from CCW direct when they were CCW, before they were bought. Although I still think original owner John is still with them. The yellow strip he put on was suppose to be temp and I had them on for a few years up until I had a hand painted on stripe. Since then I removed the stripes and just have matte black

Hey Dave,
I was reading a bunch of old threads on wheels. I came across your black and yellow CCWs. If you don't mind me asking, where did you order them from? Thx, Ken

Dave, could you pm me the floor guys number again please, i spoke to him said he would get back. Maybe he got busy or whatever.
Thanks, Greg

Dave,

Give us a call at the shop...John or Julio will take care of you. The number is (908) 317-4496.

Julian

hey ,
read your thread on boost.i have a04 z with the ptk clone .i am haveing a problem with boost. it changes a bit.the info search function of the forum is not as good as it was.i need to talk to you about boost control.
my tuner is very conservative,11.4 afr and 16 deg. w/93 oct.
last mon. we hit 9.5 psi by misstake w/ 463hp at 2600rpn.set at 7ish now but seems to drop off.
mike 251-382-1084

hey ,
read your thread on boost.i have a04 z with the ptk clone .i am haveing a problem with boost. it changes a bit.the info search function of the forum is not as good as it was.i need to talk to you about boost control.
my tuner is very conservative,11.4 afr and 16 deg. w/93 oct.
last mon. we hit 9.5 psi by misstake w/ 463hp at 2600rpn.set at 7ish now but seems to drop off.
mike 251-382-1084