TPS C5 & C6 Powder Coated & 100% Rebuilt Calipers & brackets
#1
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
TPS C5 & C6 Powder Coated & 100% Rebuilt Calipers & brackets
C5 & C6 Powder Coated Rebuilt Calipers-from $339.99 FREE SHIPPING!
CALIPERS ARE 100% REBUILT WITH NEW BOOTS AND SEALS!
-Brakes are a safety issue and we take YOUR safety very seriously. We DO NOT USE ANY OLD/ USED BOOTS or SEAL.
Our powder coating process has 2 coats of powder coating applied to each caliper and bracket which hides alot of the casting imperfections on the caliper. We can also powder coat your own calipers. If you are interested in purchasing a set of TPS Powder Coated Calipers OR having your calipers powder coated please contact us. A $400 core charge will be applied when order is placed and your old calipers must be sent back to us to receive your core charge back. Cores must be in good condition without damage.
Caliper brackets are powder coated so the pads can "float" freely in the bracket
-When caliper brackets are painted or powdercoated you MUST make sure the area where the pads sit are free of excessive powder coating. If there is excessive powder coat it will cause your brakes to bind.
Please take a look at our caliper bracket on the right as it is free of excess powder coating in areas where the pads sits... allowing it to "Freely Float" and NOT BIND.
Why not get a complete brake kit from TPS?
Whether your looking for just......
Rotors from $219.99
*Our rotors are made by Centric, the makes of Stoptech Brakes, and the cooling vanes are directional
http://forums.corvetteforum.com/c5-p...free-ship.html
TPS Stage 2 Brake Upgrade kits which includes Stoptech or Hawk Brake Pads, Stainless Steel Brake lines, rotors, and Motul Brake Fluid for only $499 shipped to your door!
CALIPERS ARE 100% REBUILT WITH NEW BOOTS AND SEALS!
-Brakes are a safety issue and we take YOUR safety very seriously. We DO NOT USE ANY OLD/ USED BOOTS or SEAL.
Our powder coating process has 2 coats of powder coating applied to each caliper and bracket which hides alot of the casting imperfections on the caliper. We can also powder coat your own calipers. If you are interested in purchasing a set of TPS Powder Coated Calipers OR having your calipers powder coated please contact us. A $400 core charge will be applied when order is placed and your old calipers must be sent back to us to receive your core charge back. Cores must be in good condition without damage.
Caliper brackets are powder coated so the pads can "float" freely in the bracket
-When caliper brackets are painted or powdercoated you MUST make sure the area where the pads sit are free of excessive powder coating. If there is excessive powder coat it will cause your brakes to bind.
Please take a look at our caliper bracket on the right as it is free of excess powder coating in areas where the pads sits... allowing it to "Freely Float" and NOT BIND.
Why not get a complete brake kit from TPS?
Whether your looking for just......
Rotors from $219.99
*Our rotors are made by Centric, the makes of Stoptech Brakes, and the cooling vanes are directional
http://forums.corvetteforum.com/c5-p...free-ship.html
TPS Stage 2 Brake Upgrade kits which includes Stoptech or Hawk Brake Pads, Stainless Steel Brake lines, rotors, and Motul Brake Fluid for only $499 shipped to your door!
__________________
TPSMotorsports.com
Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Kooks, Whipple, Magnalow, Corsa, Borla. LG Motorsports, Procharger, Billy Boat Exhaust, AWE Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Last edited by TPSMak; 03-16-2016 at 05:01 PM.
#2
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
We have the following Calipers & Brackets which are in stock and ready to ship out are listed below... no waiting right now.
C6 Black Z51-1 Set
C6 Black Base/ Standard-1 Set
C6 Red Base/ Standard-3 Sets
C5 Black Base/ Standard-1 Set
C5 Red Base/ Standard-1 Set
C6 Black Z51-1 Set
C6 Black Base/ Standard-1 Set
C6 Red Base/ Standard-3 Sets
C5 Black Base/ Standard-1 Set
C5 Red Base/ Standard-1 Set
#5
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Who else would like a set? We have Red or Black ready to ship out immediately... this will reduce your down time for your calipers. C6 Z51 will be available by the end of the week.
Installation is available also if needed
Installation is available also if needed
#8
Drifting
I am in Fresno, I am kind of interested in doing the calipers on my 07 C6 ZO6 a kind of medium blue color, solid color not metalic in any way. Hard to describe the color Iam looking for, its not dark blue and not light baby blue, you think you have something like this? The other problem is my car is my daily driver so whats the best case turn around time on my calipers? Do you ever have a set of ZO6 calipers to do for me and I just ship you mine after I get yours?
Thanks
Matt
Thanks
Matt
#9
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
I am in Fresno, I am kind of interested in doing the calipers on my 07 C6 ZO6 a kind of medium blue color, solid color not metalic in any way. Hard to describe the color Iam looking for, its not dark blue and not light baby blue, you think you have something like this? The other problem is my car is my daily driver so whats the best case turn around time on my calipers? Do you ever have a set of ZO6 calipers to do for me and I just ship you mine after I get yours?
Thanks
Matt
Thanks
Matt
We don't have a C6Z set of calipers and the turn around would be around a 1.5 weeks from when we get your calipers. What color is your car?
#11
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
We have these calipers in stock and ready to ship now...
Black C5 Calipers w/ Brackets (2 Sets)-$310 shipped to your door
Red C5 Calipers w/ Brackets (1 Set)-$310 shipped to your door
Candy Red C6 Z51 Calipers w/ Brackets (1 Set)-$400 shipped to your door
Red C6 Z51 Calipers w/ Brackets (1 Set)-$310 shipped to your door
Black C6 Calipers w/ Brakets (1 Set)-$310 shipped to your door
Black C6 Z51 Calipers w/ Brakets (1 Set)-$310 shipped to your door
Candy Red pictured below
Black C5 Calipers w/ Brackets (2 Sets)-$310 shipped to your door
Red C5 Calipers w/ Brackets (1 Set)-$310 shipped to your door
Candy Red C6 Z51 Calipers w/ Brackets (1 Set)-$400 shipped to your door
Red C6 Z51 Calipers w/ Brackets (1 Set)-$310 shipped to your door
Black C6 Calipers w/ Brakets (1 Set)-$310 shipped to your door
Black C6 Z51 Calipers w/ Brakets (1 Set)-$310 shipped to your door
Candy Red pictured below
#12
Burning Brakes
Member Since: Nov 2009
Location: North Bay CA
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
#14
Burning Brakes
Member Since: Nov 2009
Location: North Bay CA
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
#16
Pro
Can you do it in lemans blue (or close) to match the body on my C5 for that $310 price? If so, I'm interested. I could drop my car with you for a while if it would save the core and shipping hassle. Can you pm me an out the door price with install?
#17
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Also, on the C5s it takes even longer to prep them because there is ALOT of casting flash and the front calipers are REAL rough so we have to spend time smoothing them out or they won't look good
#18
Pro