Track stuff for sale
#1
Melting Slicks
Thread Starter
Track stuff for sale
I have 5 sets of A7 scrubs available for $50 a tire. Sizes are 315/30/18 and 335/30/18. Located on Hwy 152 between Los Banos and Chowchilla.
Also I'm selling 2 Corbeau micro suede LG1 racing reclining seats that I bought from TCP. Never used with seat brackets. $700 for the pair. Brackets are for C6Z but seats will work in C5 or C6.
Vette Works C6Z harness bar with harnesses. Bar only used once. Hardware included. Harnesses are expired racing harnesses, but still good for track days. $300.
Wasp Composite carbon fiber splitter/undertray. This was made for my C5, but I don't know why it wouldn't also work on a C6 or C6Z. Custom installation would be required. This was a spare for the Runoffs in 2014 but I never used it. It has mounting holes pre-drilled for my car. $400.
Also I'm selling 2 Corbeau micro suede LG1 racing reclining seats that I bought from TCP. Never used with seat brackets. $700 for the pair. Brackets are for C6Z but seats will work in C5 or C6.
Vette Works C6Z harness bar with harnesses. Bar only used once. Hardware included. Harnesses are expired racing harnesses, but still good for track days. $300.
Wasp Composite carbon fiber splitter/undertray. This was made for my C5, but I don't know why it wouldn't also work on a C6 or C6Z. Custom installation would be required. This was a spare for the Runoffs in 2014 but I never used it. It has mounting holes pre-drilled for my car. $400.
Last edited by redtopz; 04-19-2016 at 10:32 AM.
#5
Melting Slicks
Thread Starter
After talking with Tom, I realized my description of the seats wasn't accurate. They are actually Coreau LG1 Racing Seats, reclining with micro suede. Looks like they are basically $1000 with the options I have. Here's a pic of one of the seats. They also have the 5th hole for sub belts.
So if Tom doesn't want them then Mike was 2nd then Mel. Sorry about my confusion on the type of seat. Hopefully the pics will clear it up.
So if Tom doesn't want them then Mike was 2nd then Mel. Sorry about my confusion on the type of seat. Hopefully the pics will clear it up.
#7
Melting Slicks
Thread Starter
Mel the splitter is yours and Mike it sounds like the seats/rails are yours. When do you guys want to come and get them? Send me a text or call at 2097693590.
#8
Le Mans Master
Would those A7 scrubs be a decent tire for the track. I just ordered a set of rear 18"s and want something sticky. I realize these are Auto cross tires but for the price hell the 315's might be an option for the 1/4 track. If not I will keep looking.
Last edited by teddyca; 04-21-2016 at 04:50 PM.
#9
Supporting Vendor
Member Since: Nov 2005
Location: Supporting the Corvette Community at Abel Chevrolet in Rio Vista, CA 707-374-6317 Ext.123
Posts: 14,498
Received 1,425 Likes
on
597 Posts
St. Jude Donor '08
Keep looking if you want a drag radial type of tire. I've tried drag racing on A6's and they suck. These tires are for real cars that turn corners and stuff.
#10
Le Mans Master
#12
Melting Slicks
Thread Starter
OK I'll let you know if/when I head up your way. Thanks Mark.
#15
Melting Slicks
Thread Starter
I think the seats are sold to Mike. But if you can fit in stock seats then you should fit in these.
Mel did you decide on the splitter? I made some measurements and it's 72" wide and 36" front to back. Basically it's a 2" splitter in front of the front bumper and goes back to the cradle, which was the scca spec.
Mel did you decide on the splitter? I made some measurements and it's 72" wide and 36" front to back. Basically it's a 2" splitter in front of the front bumper and goes back to the cradle, which was the scca spec.
#17
Melting Slicks
Thread Starter
I'm not heading that way any time soon, but if/when I head to Sac or the Bay Area I will post up here in case someone wants me to deliver anything. Otherwise, everything will be in my shop if someone wants to come and get them.