Audi RS7?
#1
Le Mans Master
Thread Starter
Audi RS7?
Anyone here know anything about these cars? ever ran one or own one? I ran across one in my CTS V Which is no slouch and this damn Audi walked me worst than any other car I have come across? Makes me want to go buy one..lol. Damn fast car.
#2
Race Director
Quarter mile in the mid 11's, 0 to 60 in mid 3's, 560 horsepower, AWD...pretty damn fast car. I think they're around $130,000. Quicker than an M6 but a little slower than the Merc CLS63 AMG.
#4
Pro
check out what the APR tune does to one of those beasts.
670 crank HP on 93 with just a stage 1 tune.
http://www.caranddriver.com/reviews/...-1-test-review
670 crank HP on 93 with just a stage 1 tune.
http://www.caranddriver.com/reviews/...-1-test-review
#8
Le Mans Master
Thread Starter
Just spoke to a friend about this car and he knows the guy who owns it, It is tuned and has over 700hp. I am impressed but they are $$$.
Last edited by DRLC5; 01-24-2015 at 07:18 AM.
#9
Burning Brakes
#10
Le Mans Master
Thread Starter
Thumper posted this link. Not a bad price to upgrade for the HP/TQ INCREASE and no digging into the engine. I tell you my V is fairly fast and I was loosing ground in a hurry..lol. We both hit it off of a roll at about 20mph up to about 90mph as I was just wasting fuel at that time.
http://www.caranddriver.com/reviews/...-1-test-review
http://www.caranddriver.com/reviews/...-1-test-review
#11
Burning Brakes
Thumper posted this link. Not a bad price to upgrade for the HP/TQ INCREASE and no digging into the engine. I tell you my V is fairly fast and I was loosing ground in a hurry..lol. We both hit it off of a roll at about 20mph up to about 90mph as I was just wasting fuel at that time.
http://www.caranddriver.com/reviews/...-1-test-review
http://www.caranddriver.com/reviews/...-1-test-review
#14
Safety Car
Here is a vid of an APR tuned RS7 going 10.507@212.7kph (132.17mph)
These cars absolutely fly with a simple tune!!!
These cars absolutely fly with a simple tune!!!
#15
Safety Car
The next RS5 unfortunately will not get this motor. It will likely get the motor from the S6/S7 with 420hp/406tq.... Maybe massaged a bit for a few extra ponies. The current RS5 makes similar HP at 450hp but only makes 317tq at 4000rpm vs. peak torque of 406 at 1400rpm on the current S6/S7 mill