duckvett

I have all four OEM rotors I replaced on our `10 GS at 27,000 miles. Some wear on the rotors as you would expect, but these have a lot of life left in them. I previously painted the centers black with POR15, but you might want to refresh that. I replaced the rotors because I wanted to, not because I had to.
I would like to get $200 (obo) for the set. I would prefer to not ship (two boxes @ 54 lbs. each), but will if you pay. I am willing to drive some distance if you are.

Entaille

do your rotors have a little bit of a lip on the edge of them? reason I ask, I bought a full set of z06 brakes and the rotors had a bit of a lip on the edge.. was considering having them machined down before install, but it appears to be more common after seeing yours?

duckvett

Yes, there is a bit of a lip. I have no way of measuring, but I would "guesstimate" about 1/64 or .015.

Entaille

thanks! I feel better about it now. just going to install as is.

mikeCsix

You could help your sale by measuring and publishing the thickness of your rotors and if there are any heat check type cracks.

duckvett

Mike - there has been zero interest in the PNW, so I'm just going to put them in storage in the garage. But if I do decide to sell later, I will take your advise and mic them. By the way, NO cracking evident.