1969 rear quarter panel replacement - CorvetteForum - Chevrolet Corvette Forum Discussion


Paint/Body Corvette Materials, Techniques, and How To

1969 rear quarter panel replacement

Reply
 
 
 
Thread Tools Search this Thread
Old 03-20-2017, 11:59 AM   #1
hotSS1992
CF Member
Thread Starter
 
Member Since: Jun 2013
Posts: 54
Thanks: 0
Thanked 0 Times in 0 Posts
Default 1969 rear quarter panel replacement

Anyone that will help;
I am replacing a rear quarter panel on my '69. I would like to use the lord fusor 127ez for bonding the panel in place, if I do can I use the Evercoat 870 to fill in the seam between the deck and the quarter panel.

Thanks
hotSS1992 is offline   Reply With Quote
Old 03-20-2017, 06:31 PM   #2
DUB
CF Senior Member
 
Member Since: Apr 2009
Location: Charlotte NC
Posts: 13,261
Thanked 937 Times in 857 Posts
Default

You can do it as you wish.

But why not use the Vette Panel Adhesive for the entire job. You can control the hardening rate by how much hardener you add the the VPA. As like I tell many forum member's who call me. I advise them to preform a test and weigh out an amount of the VPA and add an amount of the hardener to it and spread it out and see what your work time is.

And seignior how it is a quarter panel and you test fit it and get it marked where it needs to go. And you time yourself in how long ti takes you to set the quarter up on the car and get it in place....Then using the VPA should NOT be an issue.

I know that is what I use ...or even the SMC Panel Adhesive (part number 996)...because I do not like using the current types of 2 part cartridge adhesives on the older Corvettes where it was not used for exterior panel bonding....where visible seams are involved But..as I wrote...use what you want. The SMC panel adhesive WILL work on your type of fiberglass for BONDING ONLY!!! It is NOT a filler...so the VPA needs to be applied over it if you use it.

And YES...you can apply the VPA in the seam after you use the fusor 127ez. BUT...that also depends on how well you prep that area so I can not be held liable for any problems...because I am not the one doing it.

DUB
DUB is offline   Reply With Quote
Old Yesterday, 09:26 AM   #3
Plasticfreak
CF Senior Member
 
Plasticfreak's Avatar
 
Member Since: Aug 2013
Location: Plains Pa
Posts: 1,125
Thanked 32 Times in 29 Posts
Default

X2.......VPA works best!
Plasticfreak is offline   Reply With Quote
Go Back   CorvetteForum - Chevrolet Corvette Forum Discussion >
Reload this Page
  • 1969 rear quarter panel replacement
  •  
     
    Reply


    Thread Tools Search this Thread
    Search this Thread:

    Click for Advanced Search

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off

    Forum Jump


    All times are GMT -4. The time now is 07:18 AM.


     
    • Ask a Question
      Get answers from community experts
    What's your question?
    Send