what is required to run 15" wheels?
#1
Burning Brakes
Thread Starter
what is required to run 15" wheels?
I've done a search and can't come up with a comprehensive list. What exactly is required to run 15" x 10" and 15" x 4" wheels? This is for a 2004 coupe. I'd like to run perhaps Weld Pro Stars with 28" drag radials and a skinny front.
Thanks.
Scott
Thanks.
Scott
#2
Le Mans Master
For the rear, you need different spindles.
LG makes some that allows you to run your stock rear brakes.
The rear A arm will require a small notch on the bottom
Depending on the shape of the rim barrel, you won't have to grind the rear caliber or use a spacer.
The Pro Stars have a square barrel shape, should be ok
For the front, you can run Strange light weight brakes or
I believe you can run the rear brakes on the front, but might require a spacer (not sure)
.
LG makes some that allows you to run your stock rear brakes.
The rear A arm will require a small notch on the bottom
Depending on the shape of the rim barrel, you won't have to grind the rear caliber or use a spacer.
The Pro Stars have a square barrel shape, should be ok
For the front, you can run Strange light weight brakes or
I believe you can run the rear brakes on the front, but might require a spacer (not sure)
.
Last edited by 4DRUSH; 05-12-2013 at 09:03 PM.
#3
Burning Brakes
Thread Starter
For the rear, you need different spindles.
LG makes some that allows you to run your stock rear brakes.
The rear A arm will require a small notch on the bottom
Depending on the shape of the rim barrel, you won't have to grind the rear caliber or use a spacer.
The Pro Stars have a square barrel shape, should be ok
For the front, you can run Strange light weight brakes or
I believe you can run the rear brakes on the front, but might require a spacer (not sure)
.
LG makes some that allows you to run your stock rear brakes.
The rear A arm will require a small notch on the bottom
Depending on the shape of the rim barrel, you won't have to grind the rear caliber or use a spacer.
The Pro Stars have a square barrel shape, should be ok
For the front, you can run Strange light weight brakes or
I believe you can run the rear brakes on the front, but might require a spacer (not sure)
.