robz

If Scott doesn't buy my custom cam and springs you are next in line.
If he does I can still help you with your setup. Try emailing me directly.
Sorry for the delay.
rzgl3@optonline.net

Mitch.Shea

Yea I noticed that driving the car, who does a good port job on the 243 heads for a decent price? Hoping to make 475 with all the right bolt one.

Tar Heel

Thanks for giving us first chance but we are going to pass. I'm sure it's a great cam and deal but we're going to address the cage first this winter and make engine plans in the spring.

Scott

Sébast19X

High RPM launch with the 2 step. Track prep sems good and the tires hook really well and seems to have no bug out of the hole.
Suspension seems to be dialed very well.

Anymore info about suspension /tires combo /clutch/launch rpm ?

Anyway superb passes,

Congrats,

Seb

Fartpipe

Hope that helps you frenchie!

Sébast19X

Hey hey hey, gold finger you are alive !!!!!
Glad to see that you are always the watchdog of you'rs BFF

Keep up the good work fartpissmeoffpipe, now bite you're bone and let you're master answering the question

Later,

Seb

Fartpipe

I take offense to your personal attack and forum bashing! Say you're sorry

Sébast19X

Correct

robz

Who let Tom and Jerry in here?

robz

The max effort custom cam with high rpm valve springs Combo I spec'd is NIB and still for sale and would be ideal for any 346 or slightly bigger.

robz

Hey Scott can you check your old email to see what I quoted you for the cam/springs? Thanks

Tar Heel

Sorry, I don't have it anymore nor do I remember (or have) the cam and spring specs. Martin has recommended that I go with their SNS Stage III Torquemax cam.

Scott

robz

Ok. Just trying to help someone out who wants a max effort cam for the drag strip since I know these parts are just collecting dust in my garage. And I figured the 9.7 n/a on the brakes in T- shirt weather would give a buyer the confidence that we know what we are doing.

Tar Heel

So how about shooting me a PM or email with the cam and spring specs as well as a price? I'm just letting you know what I've been recommended so far but I haven't made a purchase yet. I'd like to do the cam this summer when I'm off and at the same time I have it down for the bar install.

Scott