Fartpipe

So I just picked up a near and dear to me 1999 Red FRC. Some on here may remember that about 9-10 years ago or so I bought my first corvette. A 2000 Red FRC with MS3 cam, LS6 heads, RKT56 trans and 4.10 gears, textralia clutch, tick master, kooks headers, slp loudmouth, drag pack, fast 90mm intake, LS2 ported TB, 85mm MAF, NGK TR55's, stock suspension, 100k mile stock bottom end that made 444rwhp dynojet and ran 10.81@130mph.

Well the new whip has some great mods and ironically I knew the owner of the car back when I had my original FRC. So this car tugs at my heart strings being a red FRC.
Mods:
D1SC procharger
383ci Forged low compression motor
ported heads, blower cam, LS6intake, stock Tb
Kooks headers, borla catback
RKT56 trans and rear 3.42s (bummer! gear ratio lol needs 3.73s IMO)
wide body rear
big stereo (needs to come out for weight!!)
Spec twin disc (this may have to before racing.... shes a little light switchy)
Poor man drag pack, GTO Spares with M&H bias plys... working on some bias ply rear tire drag pack.
614rwhp on the same dyno my old car used to go on. (*hot day)

Now I know that motor vs centrifugal blowers is odd as the power #'s can be so largely apart yet similar in ET due to the power curves.

I'm not sure what this car can run but I'm sure a mid 10 is there if all stars align. If i brave the spec twin disc can i make it go 10's in the question??? Ooooorrr should I throw this new Monster Stage 3 clutch i have sitting here on the shelf and try harder? I gotta be prepared for the Corvette rental fastly approaching in November at MIR

In conclusion the following people are slow:
Gary2004Z06
RobZ
Pittyman
Capthuff
HotWheelz
Tirecraft
PRE-Z06
Nicholbag
Franypannies
RKT56 (rick kim)
joepizzaman
Stonenbonerz
LS1LT1
..... the list goes on!!!

New




OLD

C5 Pete

Every one of those drivers that you listed are faster than you, except nicholbag... Lol. That poor soul can't catch a break...

Fartpipe

Used to be faster!!! Usedddd to be!!! What about now?

C5 Pete

I guess we will see you at Atco tonight???

Fartpipe

Lol.... nooo... need bias ply rear 16in wheel and rim package first!

pit-man

Hey Butterfly, good to see you back in a real car.

It looks pretty good but the mail box has the best look...lol. What the heck...did you hit it ?

10.4 is my guess

JIMS SVT

Do you happen to know if theres any spacer behind the z06 rear wheels with the flared fenders?

Fartpipe

My car has no spacers on the rear. It's 18x12s with 335/18s. Those wheels are for sale by the way

RonSSNova

Glad you left me off your list of slow pokes!

nickolbag

Here we go. Heads up race this winter? I'll come up North.

nickolbag

Im running solid 11.0s at 135mph down here.

GARY2004Z06

Swap out clutch.
I have the bias ply tires sitting on the rack.
Just need wheels.
My guess is a mid 10 around 135 mph.

Rob Petyo

I have a set of 10" wide D10's - they are drilled but still seal, see pic.

What are you doing with the CCW's?

Tar Heel

Where did you get those tire/wheel covers? I'd like to have a set. We picked up a set of C5 Z06 wheels we're going to paint gunmetal grey and mount street tires on to be able to drive ours more and I'd like to have a set of those covers for our Bogarts/race tires when we take them off and store.

Scott

Rob Petyo

Scott

I picked up one set from Jay (4DRUSH) at the corvette challenge a few years back the other set I really do not recall, if I see them again I'll shoot you a PM. If I remember correctly, they were pretty common on car car sites such as Ecklers. Maybe give them a call.

http://www.ecklerscorvette.com

Fartpipe

Oh come on up to the corvette rental in November!! We can line up all day buttercup!!! I'm dunno at 1 dirty dunno mphs currently!

Fartpipe

Ron seriously... Who knew you were alive? Lol
I'll add you to the list!!

Fartpipe

I'll take that guess!!!! I'll need some help for sure!

C5 Pete

With your record, it'll be sold long before November rolls around.

pit-man

This is True