Looking for a powerglide tail housing
I'm looking for a Corvette tail housing for a cast iron powerglide for a 56 I recently bought. The tail housing will have the shifter mounting flanges. Original or repo is fine (assuming a repo exists). Any and all leads appreciated.
|
powerglide tail shaft
emccomas,
I do not have a tail housing but I do have a rear trans mounting bracket. (the horseshoe). as for the tail housing. Do not know of any repos. but I have heard that they can weld on the three bosses. just need a good welder. If you have a need for the bracket $50. plus $6.(for ups)= total $56. email me at race2fast@aol.com Good Luck, Jim |
Email sent, I'm interested in the bracket.
|
All times are GMT -4. The time now is 02:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands