Blower motor wiring?
Heya everyone how goes it :)
Just a quickie - I'm installing a switch to turn the blower motor on and off, and was wondering if/how anyone has done it? I figured I'd splice into that sucker and go to town lol... Cheers, Jeff |
80's a bit off from my '73, but on my '73, it's the brown wire from the heater/blower/AC fuse that is the single power in to the in car switch. cutting it and installing a switch will disable the blower in all positions. I would recomend you get a wiring diagram and trace the wires on your '80 before you start cutting. good luck,,C.
|
Thanks for the reply :)
I have disconnected the plug from the top of the heater/AC box under the hood, and the blower still turns on and off. It's the 4 plug deal with 2 plugs horizontal and 2 plugs parallel, I was guessing this was the harness for the blower motor? It's a former AC car but still has all the old AC stuff installed under the dash and on the firewall. I hope to check those fuses out tomorrow night and get this underway :willy: |
Originally Posted by mxscooter
(Post 1566681321)
Thanks for the reply :)
I have disconnected the plug from the top of the heater/AC box under the hood, and the blower still turns on and off. It's the 4 plug deal with 2 plugs horizontal and 2 plugs parallel, I was guessing this was the harness for the blower motor? It's a former AC car but still has all the old AC stuff installed under the dash and on the firewall. I hope to check those fuses out tomorrow night and get this underway :willy: |
(in a Vincent Price voice): "Eeeegg-zellennnt"
I should be able to get to it hopefully after my new baby is asleep tonight lol... Thanks again :D |
All times are GMT -4. The time now is 10:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands