cross drilled and slotted rotors
My rotors on my c5 are trashed and therefore i need to upgrade. AS far as i think my c5 is a slick looking ride and i find that the rotors on the car now are subject to rusting, dust and all other factors that make them an eye sore. That being said i am looking for a full set of cross driled and slotted rotors that perform as well as stock ...if not better but look much better while doing it. Price is a factor but any suggestions would help.:cheers:
|
Those rotors that are on eBay are zinc coated and wear really well. My car isn't a dailey driver but they've been on there for 4 years.
http://i153.photobucket.com/albums/s...r/IMG_4019.jpg |
I have a set of cross drilled and slotted rotors off my Z06 I would be willing to sell you. I have to get the new ones on first. These have about 20K miles on them and are in great shape. No track use or anything else, just DD use. I am not sure of the make or model, but will find out soon.
I am only replacing them because I got a great deal on a set of Wilwood 2 piece rotors. PM me and we can work a deal out. |
If you are still looking, I have a new set of Baer Decelarotors, still in the box, that need a new home. :cheers:
|
Originally Posted by Sabre34
(Post 1577471445)
If you are still looking, I have a new set of Baer Decelarotors, still in the box, that need a new home. :cheers:
|
Originally Posted by Mr31FlavorsVette
(Post 1577473367)
Curious as to why you didn't mount them?
|
We could certainly help you out with the GM drilled and slotted rotors and some ceramic pads!
http://www.gmpartshouse.com/accpics/19183532.jpg |
The Baer rotors would be a good choice. I ran a set of the Baer Eradispeeds on my '00 and they were a very good product.
|
I didnt want to spend the money for the Eradispeed's so I went with the Baer Decela rotors (cross drilled and slotted) and Hawk Ceramic pads from Corvette Central. I couldnt be more happy the ceramic pads are amazing for dust compared to the stock GM pads. Thank god for the ceramics no more cleaning rims after every drive!
|
Originally Posted by Gene Culley
(Post 1577482298)
We could certainly help you out with the GM drilled and slotted rotors and some ceramic pads!
http://www.gmpartshouse.com/accpics/19183532.jpg |
Hi Gene,
how much is a set of those zinc plated drilled/slotted rotors for an '04? I couldn't find them in the brakes section of the site... -Mark
Originally Posted by Gene Culley
(Post 1577482298)
We could certainly help you out with the GM drilled and slotted rotors and some ceramic pads!
http://www.gmpartshouse.com/accpics/19183532.jpg |
Here they are Lil Blue Coupe.http://forums.corvetteforum.com/c5-p...rts-house.html
|
I just installed a set of the Delco Performance Rotors on my C5.
Here is the Front: http://i94.photobucket.com/albums/l8...n/100_1497.jpg Here is the rear: http://i94.photobucket.com/albums/l8...n/100_1505.jpg |
Brake Performance drilled and slotted with black zinc :
http://i371.photobucket.com/albums/o...8/DSCN5320.jpg |
|
|
Originally Posted by Vetteman Jack
(Post 1577482709)
The Baer rotors would be a good choice. I ran a set of the Baer Eradispeeds on my '00 and they were a very good product.
|
We are running a special on front/rear kits with power stop ceramic pads for only $180.00 shipped. Check out the link in my signature for the sales thread.
|
im in canada so does that incluse shipping to vancouver b.c as well?
|
Originally Posted by Brakemotive
(Post 1577501808)
We are running a special on front/rear kits with power stop ceramic pads for only $180.00 shipped. Check out the link in my signature for the sales thread.
Very nice zinc plating on the hub. |
All times are GMT -4. The time now is 04:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands