windshield install
hey everyone im a little lost here...... im getting ready to install my windshield. its for a 76. first question... the upper moulding on my car had the clips glued in. my frame does not have any holes for the clips. do i make the holes and put the clips in? zip says you need 13 i counted 10 across the top. i know the sides get screwed in with phillps head screws. and also the corners use phillips. i just need to be pointed in the right direction pictures would be nice... my car is early 76 production. please help.......
|
I have the same year, early '76. Do those clips hold down somehow with the T-Top moulding across the upper windshield header and the w/s moulding 'grabs' onto the remaining exposed clip?
Dano, |
Here ya go. 10 on mine
@Korevette, no the T trim is independent from these clips. They should be screwed to the header.The small trim piece has bended tabs with a sort of hem to thicken it so they clip Nick http://i494.photobucket.com/albums/r...n/IMG_0226.jpg http://i494.photobucket.com/albums/r...DSC04274-1.jpg |
Hi d,
Nice looking windsheld frame and ss trim!!!! Regards, Alan |
Originally Posted by cimivette76
(Post 1577634434)
hey everyone im a little lost here...... im getting ready to install my windshield. its for a 76. first question... the upper moulding on my car had the clips glued in. my frame does not have any holes for the clips. do i make the holes and put the clips in? zip says you need 13 i counted 10 across the top. i know the sides get screwed in with phillps head screws. and also the corners use phillips. i just need to be pointed in the right direction pictures would be nice... my car is early 76 production. please help.......
http://willcoxcorvette.com/advanced_...&keywords=clip |
Originally Posted by cimivette76
(Post 1577634434)
hey everyone im a little lost here...... im getting ready to install my windshield. its for a 76. first question... the upper moulding on my car had the clips glued in. my frame does not have any holes for the clips. do i make the holes and put the clips in? zip says you need 13 i counted 10 across the top. i know the sides get screwed in with phillps head screws. and also the corners use phillips. i just need to be pointed in the right direction pictures would be nice... my car is early 76 production. please help.......
Ron http://www.speakeasy.org/~pws/Corvette.htm |
thanks alot for the help guys. so i guess just buy the clips and screws and make my own holes? cause my frame has no holes and no sign of holes being there ever. and i know the car was never taken apart until me.
|
All times are GMT -4. The time now is 04:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands