C5 A&A T-trim V3 8-Rib Blower Kit
 

I put approximately 10k miles on this kit in the 2 years I had it. It made 751rwhp on my stock shortblock with stock heads. The only part missing here is 1 silicone coupler for the blower inlet available for $12-$30 such as this one http://www.amazon.com/Vibrant-2716-B.../dp/B001806VAO. I removed this kit myself, and I made sure to get every single piece. Parts included:

A&A kit with ram air intercooler and all sheet metal to box it in.
T-trim v3 upgrade (self contained)
4 oz oil for blower
All fasteners, etc from kit
KB BAP with racetronix hotwire kit
8-rib tensioner, blower, and idler pulleys on bracket
Upgraded Tial 50mm BOV
Crank pinning fixture seen in pics. Needs the 1/4" pin available at any hardware store for $0.50.

http://i1009.photobucket.com/albums/...amea/FRCs3.jpg
http://i1009.photobucket.com/albums/...namea/FRCu.jpg
http://i1009.photobucket.com/albums/...45-08_86-1.jpg
http://i1009.photobucket.com/albums/...4-57_165-1.jpg
http://i1009.photobucket.com/albums/...6-06_565-1.jpg
http://i1009.photobucket.com/albums/...6-29_719-1.jpg
http://i1009.photobucket.com/albums/...6-25_408-1.jpg
http://i1009.photobucket.com/albums/...6-13_148-1.jpg
http://i1009.photobucket.com/albums/...11213128-1.jpg

The 8-rib pullies on the bracket will work fine with your 6 rib accessories, and will save you money if you upgrade later. The other 8-rib parts are for sale separately.

You will need upgraded injectors.
You can see the fitting on the drain line is scuffed up. It is cosmetic, but you could use a new plug easily if you like.

I'm asking $3,500. Shipping and/or payal fees are at the buyer's expense. 70lbs and likely 2 boxes.

Bump. Price dropped.

Deposit received. Pretty much sold.

Sold

Congrats:rock:

:withstupid:

Thanks. It took a while, but I guess at a certain price point people are all over these.