C5 Z06 CD Changer installation questions
Just got a great deal on a C5 CD changer; I have the unit, mounting brackets and hardware :thumbs:
Two questions: 1. Is everything there in the Z06 to mount the changer? I.e. are the holes and nut inserts there or am I getting out a drill? 2. Is there an aftermarket source for the cable to the head unit? I understood the Z typically doesn't have this cable run. THANKS! |
The COR-Har is the cable you need. Click here
I added one and just used foam to wedge it in the cubby. If you drill make sure you don't go too far through the plastic, but I'd suggest epoxy rather than drilling. |
cd installation
Originally Posted by billla
(Post 1580156645)
Just got a great deal on a C5 CD changer; I have the unit, mounting brackets and hardware :thumbs:
Two questions: 1. Is everything there in the Z06 to mount the changer? I.e. are the holes and nut inserts there or am I getting out a drill? 2. Is there an aftermarket source for the cable to the head unit? I understood the Z typically doesn't have this cable run. THANKS! |
If the cor-har is what you have it will have 2 plugs on one end, IIRC one with 3 wires and one with 4 wires. On the other end it will have a flat 10 pin plug. Cable length is around 12' long.
|
All times are GMT -4. The time now is 08:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands