Replacement Air Dams On Sale! **$89.99**
Every time you hear that "scrape" when you are driving your C5 around town, odds are that you are slowly eating up your lower air dam spoiler. The flexible plastic can resist this abuse, but over time it begins to warp, bend and ultimately falls off. If your air dam is currently warped or damaged, it is very important to have it replaced. The spoiler actually creates negative pressure under the car funneling the air to the radiator. In addition, a damaged spoiler will lead to hotter engine temps and reduced performance! :eek: If you haven't taken a look at yours yet, might want to before these sell out at this price. These are also great to have on hand when it is time for replacement (it will happen!):thumbs: Our offering is for the complete 3 piece air dam replacement kit that easily reattaches to the bumper with the existing hardware. Install can be done right at home! We have these kits available at the lowest price ever listed on the forum... $109.99! That's 20% off our already great price! Click here to order: http://www.corvettemods.com/C5-Corve...IT_p_5059.html http://i288.photobucket.com/albums/l...ody_damage.jpg http://i288.photobucket.com/albums/l...psd29970a4.jpg We also sell the left and right pieces as a kit here: https://www.corvettemods.com/C5-Corv...LY_p_5528.html And the center piece here: https://www.corvettemods.com/C5-Corv...ly_p_5529.html |
Just ordered this piece!
And the center piece here: http://www.corvettemods.com/servlet/...orvette/Detail Thank You! |
Originally Posted by Jayman
(Post 1581912526)
Just ordered this piece!
And the center piece here: http://www.corvettemods.com/servlet/...orvette/Detail Thank You! |
Can I just order the mounting kit for the center section? My spring / wire broke and now I am hanging by zip ties. Thanks
|
Originally Posted by jgump
(Post 1583225100)
Can I just order the mounting kit for the center section? My spring / wire broke and now I am hanging by zip ties. Thanks
|
Whats the reinforcement for the sides?
|
back in stock! :woohoo:
|
I'll be checking mine. I bet if I ordered those parts from Chevy, there would be a 1 in front of that $89.99. Do you have the left front inner fender? It's the section behind the tire.
|
Originally Posted by martysauto
(Post 1584360194)
I'll be checking mine. I bet if I ordered those parts from Chevy, there would be a 1 in front of that $89.99. Do you have the left front inner fender? It's the section behind the tire.
|
Is the $89.99 price still good?
|
Originally Posted by Stang-etr96
(Post 1584361601)
Is the $89.99 price still good?
|
Order placed, looking forward to freshening up the front end a little
|
Originally Posted by crazystevex
(Post 1584439547)
Order placed, looking forward to freshening up the front end a little
|
Mine looks to have attached to the frame by two bolts; it removed itself while I was driving home with the car and I was left with one bolt and a third of the air dam piece to try to figure out what the rest looked like. Are these two bolts the mounting hardware you are referring to or is there more that is added for my $14.99? Thanks.
Edit: I believe the only mounting hardware item I am missing is the second bolt, which I should be able to source from a hardware store quite easily. The two silver brackets that run from the bar just in front of the bottom of the radiator are still there. If I need nothing else, I'll just order the main piece. |
Originally Posted by rjwz28
(Post 1584728120)
Mine looks to have attached to the frame by two bolts; it removed itself while I was driving home with the car and I was left with one bolt and a third of the air dam piece to try to figure out what the rest looked like. Are these two bolts the mounting hardware you are referring to or is there more that is added for my $14.99? Thanks.
|
Are the other bolts for the brackets? See edit... I just don't want to buy a bunch of things I don't actually need.
|
Originally Posted by rjwz28
(Post 1584728354)
Are the other bolts for the brackets? See edit... I just don't want to buy a bunch of things I don't actually need.
|
I ordered the center section alone, I believe all the bolts but the one are under there so it shouldn't be a problem :thumbs:
|
Originally Posted by rjwz28
(Post 1584728462)
I ordered the center section alone, I believe all the bolts but the one are under there so it shouldn't be a problem :thumbs:
|
Can i order it via debit card?
|
Originally Posted by meine96ws6
(Post 1584780038)
Can i order it via debit card?
|
Received and installed :thumbs: the metal was bent in at one end (I assume by the postal service), may want to put a note listing as fragile on future shipments so this part that tends to see so much abuse once in place doesn't get off to a bad start before it's even installed :cheers:
|
:thumbs:
|
Just placed an order, can't wait to see my girl with the sides on. Thanks Corvettemods! :thumbs:
|
:thumbs:
|
Question for you..
Is your center air damn plastic as stiff as the oem plastic? (meaning is it pretty sturdy?).. I already have your LH/RH pieces and they were noticeably more flexable then the oem plastics... I need the center piece to be pretty stiff to help with an air flow issue I have.. I am ready to order the center piece and hardware if you can describe the rigidity of it. Thanks. |
Originally Posted by ajrothm
(Post 1585987862)
Question for you..
Is your center air damn plastic as stiff as the oem plastic? (meaning is it pretty sturdy?).. I already have your LH/RH pieces and they were noticeably more flexable then the oem plastics... I need the center piece to be pretty stiff to help with an air flow issue I have.. I am ready to order the center piece and hardware if you can describe the rigidity of it. Thanks. The center pieces is very rigid though. thx |
Originally Posted by corvettemods1
(Post 1585988043)
You want the sides to be flexible as they take the biggest hits on a turn. The oem's were flexible at one time also, but as they age they harden.
The center pieces is very rigid though. thx |
Standing by.
Originally Posted by corvettemods1
(Post 1587536833)
:thumbs:
|
I need to order one of these this spring... I got a tear in my passenger side...
|
I have a new cradle for my blower. Could I use the factory center piece still? For some reasons, the installer replaces with a bolted on piece that does not spring back from Procharger!
|
Originally Posted by Caveboy
(Post 1588710293)
I have a new cradle for my blower. Could I use the factory center piece still? For some reasons, the installer replaces with a bolted on piece that does not spring back from Procharger!
|
:thumbs:
|
All times are GMT -4. The time now is 04:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands