CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C3 Parts for Sale/Wanted (https://www.corvetteforum.com/forums/c3-parts-for-sale-wanted-57/)
-   -   parts from a 72 convertible restore (https://www.corvetteforum.com/forums/c3-parts-for-sale-wanted/3197146-parts-from-a-72-convertible-restore.html)

rod7515 01-10-2013 08:59 PM

parts from a 72 convertible restore
 
Now that Im close to being done with the 72 I started cleaning and find I have some parts to get rid of that I wont be using again. I will try adding some pics with these parts on the table at the end of this post. If you see something you may want and you think my price is out of line give me a shout. Remember this was a 72 convertible but many of the parts fit a coupe and also vettes from 70 - 74 and even up to 77. Also unless I say they are new which I do have some things I didnt use and dont have the receipts to send back they will be driver quality only. If they arent driver quality I will put that with the part. All parts would be plus shipping to you. Actual cost. Please either PM me or send me an email if interested in any parts.

Motive Brake bleeder- brand new never opened- $65
Deck lid bezels $15 pr
4 wheels, trims and center caps - $300
Exhaust Bracket - $10
Gas Pedal - $3
Brake Pedal pad - $3
Auto Neutral safety switch, $10
Automatic shifter knob and button $5
Exterior Lock Cylinders - $6 no keys Original
Radio Speaker Bracket Frt - $4
Trailing arm bushings - new $20 pr
I have 2 rears set up in carriers, first has original 3:08 from my 74 with 28K on them - make offer
2nd one is a set of 3:55 I bought and changed my mind and went with 4:11 - Make offer
Fan Clutch with fan - make offer
Other pics of parts available as Im having trouble posting them

http://i1014.photobucket.com/albums/...ps72fd2a1a.jpg

http://i1014.photobucket.com/albums/...ps69c70fcf.jpg

http://i1014.photobucket.com/albums/...psa688cfe8.jpg

http://i1014.photobucket.com/albums/...ps9277758b.jpg

http://i1014.photobucket.com/albums/...psb2d060c4.jpg

jhudec 01-10-2013 09:09 PM

pm sent

jhudec 01-10-2013 09:13 PM

72 parts
 
I may be interested in the following. Need more info though and pics/prices.
brake bleeder (I need to research this item)
fan clutch (what is the date on the flange where it bolts to the water pump?)
gauges and clock (need pics and need to know what works)

Thanks,
Joe

62corvette 01-10-2013 11:22 PM

Pm sent on fan and clutch.
If you'll take $75 on them, I'm a buyer. Please let me know.
MikebErnst

rod7515 01-10-2013 11:39 PM

Pm replied to Joe & Mikebernst.

Jclgodale3 01-11-2013 12:32 AM

how much shipped to 35749 for the wiper switch, vents and bezel assembly? Didn't see a price listed. Thanks!

mbeeman350 01-11-2013 06:43 AM

Interested in the 3.55 rear diff. What condition and milage?
Where are u located ? Shipping is a killer on these. Mark

rod7515 01-11-2013 07:19 AM

PM's sent to jclgodale3 and mbeeman350.

GPGG70 01-11-2013 09:50 AM

What motor was the fan and fan clutch from. Did your car have AC?
Thanks.

Sully1882 01-11-2013 02:45 PM

I'd like the center cushion, sending PM

Sully

Sully1882 01-11-2013 02:50 PM

PM is full/limit exceeded. Please PM me about sale

Sully

Jclgodale3 01-11-2013 02:58 PM


Originally Posted by rod7515 (Post 1582792941)
PM's sent to jclgodale3 and mbeeman350.

pm replied. thanks!

stmiked 01-11-2013 04:43 PM

pm sent on spring bolts

rod7515 01-11-2013 09:39 PM

I replied back to everyone that contacted me so far. If you didnt hear back pm me and I will return your reply. Thanks for all the interest so far.
Rodney

cm2dinger 01-14-2013 04:51 AM

do the sidepipes include the headers? and are they for a small block.

71454 01-14-2013 06:37 PM

interested in Windshield Molding Header corner for convertible
and e break need better photos

rod7515 01-15-2013 08:12 PM

Replied back to all with questions thru PMs. The headers are not included with side pipes and they are for a small block.



Thanks again
Rodney

n.g.hayes 01-15-2013 11:35 PM

Sent you a PM on the tranny crossmember.
Thanks

rod7515 02-17-2013 08:50 AM

PM sent on trim rings.
Thanks for inquiring.
Rodney

rod7515 02-17-2013 09:24 PM

Dustin, a PM is a private message. When you log on it should notify you that one has been sent.

Rodney

rod7515 03-11-2013 12:35 PM

Ttt

still have some parts to get rid of!

franjw 03-17-2013 12:58 PM

I am interested in the window cranks. Let me know total incuding shipping to 80504.
Do you happen to have an extra window crank removal tool that you would sell.

STL Zombie Hunter 03-17-2013 11:13 PM

What was the determination of fan clutch? I assume you have A/C, but what engine size? I have the base 350.

Also on rear view mirror, is it original or new? Is it black?

Thanks,
Michael

STL Zombie Hunter 04-09-2013 09:19 AM


Originally Posted by STL Zombie Hunter (Post 1583392248)
What was the determination of fan clutch? I assume you have A/C, but what engine size? I have the base 350.


Thanks,
Michael

Same message.... fan still available? Window Cranks?

C3Stinger2013 04-09-2013 09:45 AM

Pm sent on parts.
Thanks Randy

Kuhndar 04-09-2013 04:25 PM

Fan guard
 
Do you still happen to have your fan guard and if so how much shipped to ohio?

Thanks DK

C3Stinger2013 04-09-2013 05:56 PM

I need the:
2 Window Cranks
2 Lock knobs
Rear View Mirror
How much is the ac wiper switch bezel?
Thanks

C3Stinger2013 04-09-2013 06:06 PM

I need:
2 window cranks
2 lock knobs
rear view mirror
driver mirror

Do you still have the cushion and wiper/ac bezel?
Thanks

STL Zombie Hunter 04-09-2013 09:29 PM

I don't think he checks this anymore guys. I requested info on 3/17 & today. Still no response.

rod7515 05-25-2013 06:06 AM

I've updated the list of parts left. If there is any other parts you need please PM me or send an email. Rod7515@verizon.net
Thanks
Rodney


All times are GMT -4. The time now is 02:22 PM.


© 2024 MH Sub I, LLC dba Internet Brands