CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C6 Parts for Sale/Wanted (https://www.corvetteforum.com/forums/c6-parts-for-sale-wanted-115/)
-   -   FS: RED Brake Calipers, baskets, & pads for C6 (https://www.corvetteforum.com/forums/c6-parts-for-sale-wanted/3222784-fs-red-brake-calipers-baskets-and-pads-for-c6.html)

1999PewterCorvette 02-22-2013 11:49 AM

FS: RED Brake Calipers, baskets, & pads for C6
 
C6 RED brake calipers, caliper baskets, brake lines, & brake pads

Painted in High temp ceramic caliper paint (gloss red)
Less than 6,000 miles on calipers. (Off of a 2009 corvette)
90% on brake pads.
Everything seen included (brake lines, etc)
$350 + 25 bucks for shipping to lower 48.

http://i280.photobucket.com/albums/k...ps2405bd8b.jpg

http://i280.photobucket.com/albums/k...ps514400a7.jpg

http://i280.photobucket.com/albums/k...pse709d087.jpg

http://i280.photobucket.com/albums/k...ps4dcb2895.jpg

http://i280.photobucket.com/albums/k...ps680f5c36.jpg

teenVette 02-22-2013 12:57 PM

Are these for a Z51?

76LS1BIRD 02-22-2013 02:01 PM


Originally Posted by teenVette (Post 1583190871)
Are these for a Z51?

The brackets look like base, not Z51

1999PewterCorvette 02-22-2013 04:10 PM

The calipers are the same, either for a base C6 or a Z-51.
Therefore, also the brake pads are the same for the two models as well.
However, the brackets are different sizes on Z-51 models in order
to move them out further to make room for the larger rotors on
z51 models.
These are from a base C6 corvette. So the calipers and pads are okay
for z-51, just not the brackets.

:cheers:
Rob

teenVette 02-22-2013 04:33 PM

Wish the whole kit was for the Z51. This is for my wife's C6, she drives it on a daily basis back and forth to school, so I would need a one for one swap on the kit.

1999PewterCorvette 02-23-2013 09:36 AM

TTT :cheers:

1999PewterCorvette 07-05-2013 09:28 AM

New price! TTT. :cheers:

tom1fastcar 07-06-2013 01:01 PM

brake assembly for sale
 
Are the calipers powder coated (baked on) or painted? What's important--is it easy to clean brake dust off the calipers??
Thanks!

1999PewterCorvette 07-07-2013 09:41 AM

They were glass-beaded and then painted with high temp ceramic paint.
We chose to paint them because we were told you dont ever want to powdercoat calipers. Powder-coating creates a thermal barrier, trapping heat that the caliper is desperately trying to shed. I believe stock z-06 calipers are painted and not powdercoated for this reason. Sure, a powder coated surface is stronger than paint , but shedding brake dust would be the same I guess. Its a painted finish and wipes or rinses right off. Hope that helps.
:cheers:

tom1fastcar 07-07-2013 09:47 AM

I am interested please email me with contact info at one4allseasons12@att.net.
Thanks!

1999PewterCorvette 07-07-2013 11:23 AM

Tom,
Just sent you an email. :cheers:

1999PewterCorvette 07-09-2013 12:57 PM

sold to Tom1fastcar !!
:smash::smash::smash:


All times are GMT -4. The time now is 07:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands