CorvetteForum - Chevrolet Corvette Forum Discussion - Did my weatherstrip with no glue

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)

- C4 Tech/Performance (https://www.corvetteforum.com/forums/c4-tech-performance-48/)

- - Did my weatherstrip with no glue (https://www.corvetteforum.com/forums/c4-tech-performance/3289246-did-my-weatherstrip-with-no-glue.html)

Lucky86

06-15-2013 07:46 AM

Did my weatherstrip with no glue

The weatherstrip around my windshield fit so well from mid america, that i didnt use any glue. It just fit tight right down in the little channel. Anyone see a problem doing this? Anyone else ever use no glue?

Jud Chapin

06-15-2013 07:56 AM

IMHO, if the factory used it, I'd do the same. Car companies rarely waste money using/installing unnecessary items. Check the Assembly Manual. Just my 2 cents.

pianoguy

06-15-2013 11:24 AM

I installed new weatherstripping on the A and B pillars several years ago without glue, and have never had a problem.

Red89'-L98

06-15-2013 11:33 AM

I used a tiny bit of glue at the ends and the corners and have had no problems. I dont think it will matter if you do or don't as long as it is installed correctly.

Steve59

06-16-2013 11:25 AM

Quote:

Originally Posted by Veryevilkitten2 (Post 1584162807)

I used a tiny bit of glue at the ends and the corners and have had no problems. I dont think it will matter if you do or don't as long as it is installed correctly.

Ditto

csthews

06-16-2013 01:54 PM

I used glue on mine....I wish I would have gone glue free.

All times are GMT -4. The time now is 11:19 AM.