Lots of parts. Headers, Injectors, Front Cover, Pistons, Rods...
 

Lots of parts I need to get rid of in the garage. Some are new, some are used. All prices are without actual shipping OBO.

LS2 Valley Cover NEW $50
http://i43.tinypic.com/2vrxz7q.jpg

2 GSS341 Walbro Fuel Pumps USED $100
http://i41.tinypic.com/33fbwgm.jpg
Scoggin Dickey Ported LS1 Oil Pump NEW $100
http://i40.tinypic.com/bijpf7.jpg
ARP Head Bolts newer style block NEW $125
http://i42.tinypic.com/fmnwyg.jpg
Eagle H Beam 6.125 Connecting Rods w/ ARP 2000 bolts. These rods need new bushings pressed in. I was told they can be used, however I decided to buy new rods after speaking with my machine shop. Going to make it cheap cause of the cost of machining. USED $150
http://i43.tinypic.com/b5nwqo.jpg

Wiseco Forged 4.030 Pistons and pins. So these pistons are 4 to 5 thousandths undersized (or worn). I believe they can still be used, but your machine shop will have to machine the block to the specific piston size. All of the pistons are used. They have scratches all over them from not being taken care of by the previous owner. Two of the pistons I am not sure can even be used and I have provided specific pictures showing the damage to those pistons. This information was not given to me when I purchased the pistons and my block was already bored out so using the pistons was a no go. Letting them go cheap because at least 2 pistons may need to be purchased to have a complete set ready to go. USED $150
http://i43.tinypic.com/9lk5uh.jpg
http://i39.tinypic.com/sndlvl.jpg
http://i43.tinypic.com/1ywsw6.jpg
All prices are OBO without shipping.:cheers:

PM inbound about injectors

You got pm

I'll take the Casper's harness. PM me payment info please.

Thank you-
Jeremy

One guy in front of you for the harness Panic. Injectors are SOLD. Thanks perf0rmance.

Ttt

Get payment on that harness yet?

Let me know, thank you...
Jeremy

I have not gotten payment yet. It is yours tomorrow if I dont get a response.

Are the shorties smog legal?

Thanks. PM me payment info when you can.

Jeremy

Jeremy you have a pm.

Ttt

Ttt

received the injectors... FAST SHIPPING!!!

Glad to hear it! Headers, Injectors, and LS1 to LS2 harness SOLD!

Will you take $70 shipped to 19008 including PayPal fees for the front cover/gasket/sensor?

back you have a pm

Ttt

ttt

ttt