Door Ajar Switch Part
#1
Intermediate
Thread Starter
Member Since: Aug 2014
Location: Long Island City New York
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Door Ajar Switch Part
Good Afternoon All:
I am having an issue where each time I hit a heavy bump the "door ajar" sign comes on. In addition to this the interior lights come on. My mechanic states that the part has been discontinued via GM and his parts guy. Anyone know how i can fix this issue or anywhere i can get parts?
DANKE! Chris
I am having an issue where each time I hit a heavy bump the "door ajar" sign comes on. In addition to this the interior lights come on. My mechanic states that the part has been discontinued via GM and his parts guy. Anyone know how i can fix this issue or anywhere i can get parts?
DANKE! Chris
#2
Melting Slicks
Good Afternoon All:
I am having an issue where each time I hit a heavy bump the "door ajar" sign comes on. In addition to this the interior lights come on. My mechanic states that the part has been discontinued via GM and his parts guy. Anyone know how i can fix this issue or anywhere i can get parts?
DANKE! Chris
I am having an issue where each time I hit a heavy bump the "door ajar" sign comes on. In addition to this the interior lights come on. My mechanic states that the part has been discontinued via GM and his parts guy. Anyone know how i can fix this issue or anywhere i can get parts?
DANKE! Chris
#6
#7
Melting Slicks
#8
Good Afternoon All:
I am having an issue where each time I hit a heavy bump the "door ajar" sign comes on. In addition to this the interior lights come on. My mechanic states that the part has been discontinued via GM and his parts guy. Anyone know how i can fix this issue or anywhere i can get parts?
DANKE! Chris
I am having an issue where each time I hit a heavy bump the "door ajar" sign comes on. In addition to this the interior lights come on. My mechanic states that the part has been discontinued via GM and his parts guy. Anyone know how i can fix this issue or anywhere i can get parts?
DANKE! Chris
#10
Intermediate
Thread Starter
Member Since: Aug 2014
Location: Long Island City New York
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
#11
I don't remember the size. But you'll want an o-ring that fits snug on the plunger shaft, but the outer diameter of the o-ring is same size or slightly smaller than the outer diameter of the head of the plunger. You'll want to still be able to push the plunger inside the housing. Saw someone mention a #60 o-ring size.
You can try one at first. But if you still get some Door Ajar lights, can add on a 2nd one.
You can try one at first. But if you still get some Door Ajar lights, can add on a 2nd one.
#12
- I know the OP has a later model, but I freed up the ones on my 85, with a multi-purpose lube. seemed to work OK. I would have liked to upgrade the 85's, but with the newer parts, and the wiring adapters, I was looking at around $100 for both doors.
Last edited by Joe C; 10-23-2014 at 04:00 AM.