kris6613

Car is in good condition inside and out.

VIN - 1G1YY26E265107453

- Has new brakes and rotors on all 4 corners (OEM)
- New plugs and wires for 50k mi service (OEM)
- Recently checked by a corvette specialist at Grabiak Chevrolet and no issue were found (thats who replaced the plugs and wires)
- New O2 sensor and Cat on drivers side (OEM)
- Was told by GM that the motor was replaced around 22k mi (I do not have the paperwork but a call to the dealer with the VIN should clear up any questions that you may have.
- Clean CarFax with no accident history (also the car shows no sign of previous damage or repair)

- Will need tires
- Has a small hole in the passenger seat and both are showing some wear
- Some road rash on wheels.
- Sometimes throws a code for the steeling wheel position sensor ( mechanic recommended that I do not replace unless the light comes on and stays on)

Overall an awesome car that should make any new owner happy.

s2000Mi

Any mods except for the head unit and painted/dipped wheels?

kris6613

Jonny O Connel sway bars and Pfadt Shocks (not coilover)

1 to 4 shift is disabled

bypass switch for the quad tips

Other than that no

kris6613

Located in Pittsburgh, PA

s2000Mi

Got any pictures of the seat and wheel blemishes? Any pictures of under the hood? Im assuming it wasnt driven through winter?

kris6613

No, i dont drive it in the winter.






Tear is on the left side bottom of the seat very small, yoi can see it if you zoom

Jeepbeer

Are the wheels powdercoated or PlastiDipped??
How often do you change the clutch fluid?
And where is the car registered/Located?


Thanks

kris6613

Don't Know

Never

Pittsburgh

kris6613

I am motivated to sell. Is my price to high?

s2000Mi

Its probably in the middle. Im in the market for one and I was kind of leaning toward 2008+ but its nice if this had the engine replaced. Im making sure my financials are in order. Minimal mods are what Im looking for and this fits the bill. Its not a bad price.

toyotabike

Was the engine replaced due to faulty heads? Does the engine now have reworked heads?

RC000E

I think it's a good enough price to spark some offers. Pretty nice car overall. Any engine bay shots?

kris6613

I am not sure. also I am not so sure why every is worried about heads on every car. Insane

kris6613

I don't have anything at the moment. Car is in the garage. I can assure you that it is clean and looks the same as every other stock C6Z under the hood.

kris6613

Well let me know if the situation changes or give me a call 814-591-7596

s2000Mi

Granted, the internet blows everything out of proportion, but its just a bit of piece of mind. Dropping a valve means a whole new engine and Im not sure the exact figure but probably an easy 10 grand cherry on top.

kris6613

Is anyone interested at $32000 cash. I am not interested in a trade.

redcycle13

I'd be interested for 30k. It would give some room for the steering wheel position sensor, seats, and wheels to be repaired.

kris6613

I still have the car is you are interested

redcycle13

I bought one already, but I think your car will sell pretty darn close to the offer I made. I had to give more than what I offered for yours to buy the one I ended up with. Good luck with your sale.