Coolant Dex/Water percentages
#1
Melting Slicks
Thread Starter
Coolant Dex/Water percentages
I am getting ready to make some changes and am wanted to hear some opinions on coolant percentages with Dexcool.
I already know the method. No confusion there. I am just wanting input (opinions also welcome here) for my particular climate and build. I conducted a search and did not find the information I was looking for.
Very simply put its a full bolt on HCI 440 build with a 250 shot in anywhere from -20F - 100F and I don't want to change coolant with the seasons..
I already know the method. No confusion there. I am just wanting input (opinions also welcome here) for my particular climate and build. I conducted a search and did not find the information I was looking for.
Very simply put its a full bolt on HCI 440 build with a 250 shot in anywhere from -20F - 100F and I don't want to change coolant with the seasons..
#2
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
To not freeze at -20*F you're going to have to be at something like 40% dexcool minimum I'd expect
#3
Team Owner
Yep, what Carson said. You need to follow the dexcool instructions then for at least -20F, I would even go a bit past that. No reason listening to what other people say/do.