95 C4 Coupe, LT1 6spd PARTING OUT
#1
Instructor
Thread Starter
95 C4 Coupe, LT1 6spd PARTING OUT - SOLD OUT!
Hey everyone....
I wanted to thank everyone that inquired AND purchased items. This was an excellent learning experience and I hope I helped others within this hobby.
With that said I recently sold all of the remaining parts to a local Corvette guy and I'd be happy to forward any inquires. However, I'm for now out of the Corvette C4 parts business.
Once again...thank you and have fun this season!
Bill Robertson
I wanted to thank everyone that inquired AND purchased items. This was an excellent learning experience and I hope I helped others within this hobby.
With that said I recently sold all of the remaining parts to a local Corvette guy and I'd be happy to forward any inquires. However, I'm for now out of the Corvette C4 parts business.
Once again...thank you and have fun this season!
Bill Robertson
Last edited by bmw_bill; 06-26-2017 at 03:44 PM. Reason: SOLD EVERYTHING
#5
Instructor
Thread Starter
#7
Instructor
Thread Starter
Hand Brake Assembly
#9
Instructor
Thread Starter
The following users liked this post:
kaz24 (01-23-2017)
#12
Instructor
Thread Starter
#14
Heel & Toe
Member Since: Mar 2012
Location: Lake Wylie S.C.
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the response. you can e mail the pictures and let me know the price you want for them. My e-mail is battermoose11@gmail.com
#15
Instructor
Thread Starter
Sent reply and invite to look at detailed pics on website
Thanks for the response. you can e mail the pictures and let me know the price you want for them. My e-mail is battermoose11@gmail.com
Also....I'll take $200 for them...not including shipping/handling.
Thanks!
BillR
Last edited by bmw_bill; 03-28-2015 at 03:30 PM.
#16
Instructor
Thread Starter
I will update this list on Sunday. Several offers have been made directly to my email address and we are close to closing on them.
Note...I have a web site where pictures are posted of most of the parts. The files are too large to send. Thus...let me know via email if you want an invite.
Thanks
BillR
Note...I have a web site where pictures are posted of most of the parts. The files are too large to send. Thus...let me know via email if you want an invite.
Thanks
BillR
#18
Instructor
Thread Starter
Rear Bumper
I still have the rear bumper....surprisingly...there are no tears or marring (cuts) on the surface. It does have some deforming due to the building falling on the car and it bending the supports and adjacent fiberglass body parts. I have one other picture that I can send you that shows the most obvious defects but I'll snap other pictures to show it's current condition.
I actually had a urethane bumper guy look at it. He told me that it could be put back into serviceable condition with the possibility that the most severe defects could work themselves out with normal environmental exposure (heat and cold....expansion and contraction).
So...is it for sale...absolutely...cause I don't want to throw it away...especially if someone can use it. However, shipping is going to be a pain due to its size.
The question is....where are you located? STUPID QUESTION...I just looked at your profile...you are right up the road. I'm in Uxbridge...you can look at the parts in person!
However, send me your email address and I'll send you a link to where I'll up load the pics....and save you a ride given this stupid weather!
My personal email address is bmw_bill@hotmail.com
Thanks
BIllR
Last edited by bmw_bill; 03-28-2015 at 03:33 PM.
#20
Instructor
Thread Starter
Console Shifter Plate
Hi
I've currently quoted this part to another person. However, the money has not been received. The price is $80. My part is in excellent condition.
I'll post a picture if the party mentioned above fails to purchase.
Thanks!
I've currently quoted this part to another person. However, the money has not been received. The price is $80. My part is in excellent condition.
I'll post a picture if the party mentioned above fails to purchase.
Thanks!