Corvette C7 Z06 Removable Front License Plate Mount @ PFYC-PartsForYourCar
12-15-2015, 06:25 PM
#1
Platinum Supporting Vendor
Thread Starter
Corvette C7 Z06 Removable Front License Plate Mount @ PFYC-PartsForYourCar
2015-2016 Corvette Z06 Removable Front License Plate Mount
So you don’t like the license plate on the front of your vehicle, neither do we. Well now you can put one on like the law requires and take it off when you want to run around without one easily.
This is the C7 Z06 Corvette license plate mount you have been looking for - completely engineered to provide a sturdy front license while giving you the opportunity to quickly remove the plate at your favorite car show.
The stamped steel bracket mounts to your Z06 Corvette's front end grill using an engineered clip and release design. Designed to allow for the aluminum license plate holder to quickly lock in place. No tools required. No modification to your Corvette Stingray. No more looking at that ugly factory plate holder while sitting at the shows. You can have your license plate on and off in less than the amount of time it takes for your Corvette to go from 0 to 60 mph.
The secret behind this mount is the specially designed release mechanism which allow you to simply install and remove your plate from the front of your C7 Corvette. You will be impressed. Made in the USA. Fits 2015-2016 Z06 Corvettes only.
FREE SHIPPING in the Lower 48 states! Half price shipping to Canada!
2015 2016 Corvette Z06 Removable Front License Plate Mount
So you don’t like the license plate on the front of your vehicle, neither do we. Well now you can put one on like the law requires and take it off when you want to run around without one easily.
This is the C7 Z06 Corvette license plate mount you have been looking for - completely engineered to provide a sturdy front license while giving you the opportunity to quickly remove the plate at your favorite car show.
The stamped steel bracket mounts to your Z06 Corvette's front end grill using an engineered clip and release design. Designed to allow for the aluminum license plate holder to quickly lock in place. No tools required. No modification to your Corvette Stingray. No more looking at that ugly factory plate holder while sitting at the shows. You can have your license plate on and off in less than the amount of time it takes for your Corvette to go from 0 to 60 mph.
The secret behind this mount is the specially designed release mechanism which allow you to simply install and remove your plate from the front of your C7 Corvette. You will be impressed. Made in the USA. Fits 2015-2016 Z06 Corvettes only.
FREE SHIPPING in the Lower 48 states! Half price shipping to Canada!
2015 2016 Corvette Z06 Removable Front License Plate Mount
__________________
PFYC.COM - Proudly Serving You For Over 20 Years! Call Us Toll Free: 866.695.PFYC (7392)
www.pfyc.com info@pfyc.com .."we're here to help"
PFYC.COM - Proudly Serving You For Over 20 Years! Call Us Toll Free: 866.695.PFYC (7392)
www.pfyc.com info@pfyc.com .."we're here to help"
12-28-2015, 12:41 PM
#3
Platinum Supporting Vendor
Thread Starter
01-05-2016, 06:10 PM
#4
Racer
instructions have a pic on car
check out instructions, anyone buy yet, if so, give us a opinion!
Last edited by rockit1; 01-05-2016 at 06:11 PM.
02-26-2016, 04:28 PM
#5
Platinum Supporting Vendor
Thread Starter
2015-2016 Corvette Z06 Removable Front License Plate Mount
So you don’t like the license plate on the front of your vehicle, neither do we. Well now you can put one on like the law requires and take it off when you want to run around without one easily.
This is the C7 Z06 Corvette license plate mount you have been looking for - completely engineered to provide a sturdy front license while giving you the opportunity to quickly remove the plate at your favorite car show.
The stamped steel bracket mounts to your Z06 Corvette's front end grill using an engineered clip and release design. Designed to allow for the aluminum license plate holder to quickly lock in place. No tools required. No modification to your Corvette Stingray. No more looking at that ugly factory plate holder while sitting at the shows. You can have your license plate on and off in less than the amount of time it takes for your Corvette to go from 0 to 60 mph.
The secret behind this mount is the specially designed release mechanism which allow you to simply install and remove your plate from the front of your C7 Corvette. You will be impressed. Made in the USA. Fits 2015-2016 Z06 Corvettes only.
FREE SHIPPING in the Lower 48 states! Half price shipping to Canada!
2015 2016 Corvette Z06 Removable Front License Plate Mount
So you don’t like the license plate on the front of your vehicle, neither do we. Well now you can put one on like the law requires and take it off when you want to run around without one easily.
This is the C7 Z06 Corvette license plate mount you have been looking for - completely engineered to provide a sturdy front license while giving you the opportunity to quickly remove the plate at your favorite car show.
The stamped steel bracket mounts to your Z06 Corvette's front end grill using an engineered clip and release design. Designed to allow for the aluminum license plate holder to quickly lock in place. No tools required. No modification to your Corvette Stingray. No more looking at that ugly factory plate holder while sitting at the shows. You can have your license plate on and off in less than the amount of time it takes for your Corvette to go from 0 to 60 mph.
The secret behind this mount is the specially designed release mechanism which allow you to simply install and remove your plate from the front of your C7 Corvette. You will be impressed. Made in the USA. Fits 2015-2016 Z06 Corvettes only.
FREE SHIPPING in the Lower 48 states! Half price shipping to Canada!
2015 2016 Corvette Z06 Removable Front License Plate Mount
03-04-2016, 02:43 PM
#6
Heel & Toe
I've had mine for a few months and really like it for the times it is necessary to clip on a front plate (parking police issue $80 ticket for no front plate). It takes seconds to mount.
Aesthetically it looks better than other options that are centered vertically in the grille. Looks best IMO to mount a bit lower.
Aesthetically it looks better than other options that are centered vertically in the grille. Looks best IMO to mount a bit lower.
Last edited by 65 Coupe; 03-04-2016 at 03:20 PM.
03-05-2016, 09:51 AM
#7
Intermediate
Member Since: Aug 2015
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Tracking
I've had mine for a few months and really like it for the times it is necessary to clip on a front plate (parking police issue $80 ticket for no front plate). It takes seconds to mount.
Aesthetically it looks better than other options that are centered vertically in the grille. Looks best IMO to mount a bit lower.
Aesthetically it looks better than other options that are centered vertically in the grille. Looks best IMO to mount a bit lower.
Nick
06-21-2016, 07:39 PM
#12
Platinum Supporting Vendor
Thread Starter
If and when you get your 1st ticket.. They will be here for you to order... a lot of states are starting to give tickets for no front plate
Last edited by PFYC; 09-01-2016 at 12:55 AM.
07-18-2016, 09:34 PM
#13
Amat Victoria Curam
Bought one a few months ago. It's a nice, very heavy duty piece that, once affixed is really stable. Nothing scrapes or scratches - it's a clever design!
I carry my front plate, mounted on this bracket, in my trunk net and throw it on whenever I feel the need.
So far, so good with the local officers.
I carry my front plate, mounted on this bracket, in my trunk net and throw it on whenever I feel the need.
So far, so good with the local officers.
Last edited by HighBeta; 07-18-2016 at 09:35 PM.
08-12-2016, 11:20 AM
#14
The price is steep but I would guess that there was a lot of work that went into this, for a fairly small market. The feds are putting pressure on the states to all require front plates, and to enforce the requirement. So security cameras have a better chance of identifying bad actors.
In Washington DC they will give you a ticket for no front plate even if you are from out of state, if your state requires front plates and you don't have one. Ask me how I know....(yes the ticket is of questionable legality, but I, like most people, am not going to go to court for a $50 parking ticket, and the DC government knows it).
that having been said, I haven't bought one yet.....
In Washington DC they will give you a ticket for no front plate even if you are from out of state, if your state requires front plates and you don't have one. Ask me how I know....(yes the ticket is of questionable legality, but I, like most people, am not going to go to court for a $50 parking ticket, and the DC government knows it).
that having been said, I haven't bought one yet.....
09-01-2016, 06:30 PM
#17
Safety Car
I have one and in northern Virginia it is a necessity in that the various police departments and county sheriff organizations are being required by the superiors to generate more revenue.
It fits snugly on a Z06 grill and can be easily removed for shows.
It fits snugly on a Z06 grill and can be easily removed for shows.
05-29-2019, 10:53 AM
#19
Racer
08-26-2019, 08:46 AM
#20
Platinum Supporting Vendor
Thread Starter
So you don’t like the license plate on the front of your vehicle, neither do we. Well now you can put one on like the law requires and take it off when you want to run around without one easily.
This is the C7 Z06 Corvette license plate mount you have been looking for - completely engineered to provide a sturdy front license while giving you the opportunity to quickly remove the plate at your favorite car show.
The stamped steel bracket mounts to your Z06 Corvette's front end grill using an engineered clip and release design. Designed to allow for the aluminum license plate holder to quickly lock in place. No tools required. No modification to your Corvette Stingray. No more looking at that ugly factory plate holder while sitting at the shows. You can have your license plate on and off in less than the amount of time it takes for your Corvette to go from 0 to 60 mph.
The secret behind this mount is the specially designed release mechanism which allow you to simply install and remove your plate from the front of your C7 Corvette. You will be impressed. Made in the USA. Fits 2015-2016 Z06 Corvettes only.
FREE SHIPPING in the Lower 48 states! Half price shipping to Canada!
This is the C7 Z06 Corvette license plate mount you have been looking for - completely engineered to provide a sturdy front license while giving you the opportunity to quickly remove the plate at your favorite car show.
The stamped steel bracket mounts to your Z06 Corvette's front end grill using an engineered clip and release design. Designed to allow for the aluminum license plate holder to quickly lock in place. No tools required. No modification to your Corvette Stingray. No more looking at that ugly factory plate holder while sitting at the shows. You can have your license plate on and off in less than the amount of time it takes for your Corvette to go from 0 to 60 mph.
The secret behind this mount is the specially designed release mechanism which allow you to simply install and remove your plate from the front of your C7 Corvette. You will be impressed. Made in the USA. Fits 2015-2016 Z06 Corvettes only.
FREE SHIPPING in the Lower 48 states! Half price shipping to Canada!